bObsweep bObi Pet 2.0 Lühike juhend

Tüüp
Lühike juhend

See käsiraamat sobib ka

Quick Start
Quick Start Guide
Here’s What You’ll Need:
All parts are included in bObi’s box.
Philips Head
Screwdriver Battery Charging Station Charging Adapter
Step 1:
Install the Battery
Remove the battery cover. Plug the battery
in at the circuit junction. Tuck the wire into
the side of the compartment and slide the
battery in.
Step 2:
Charge bObi
Place bObi on her charging station with the
metal nodes on her front resting against
the plates on her station and allow her to
charge.
Step 3:
Let bObi Sweep!
Press the GO! button on bObi’s cover.
Before starting, remove the clear plastic on bObi’s power switch
and ip the power switch ON.
When Charging:
The center light will blink to
indicate that bObi is charging.
Cleaning can be overwhelming, so we kept things simple.
In just a few easy steps, bObi will be ready to work!
Important Note:
bObi automatically returns to her
charging station when low on
battery. If bObi is having trouble
nding her station, you will need
to sync it. Refer to the Charging
section of bObi’s manual.
When Fully Charged:
The center light will remain solid.
  • Page 1 1

bObsweep bObi Pet 2.0 Lühike juhend

Tüüp
Lühike juhend
See käsiraamat sobib ka

teistes keeltes