1.
Power on the camera and connect to your router
Plug the camera into the electric power outlet
cable in one of the LAN ports of the
the camera cable.
2.
Download and install
a)
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
search for the word “
iOS
b)
Open the app and you will be on the “Home Page”
MODEL: Ouvis C2
Power on the camera and connect to your router
Plug the camera into the electric power outlet
, and
connect one end of the Ethernet
cable in one of the LAN ports of the router, and the other end in the
Download and install
the Ouvis app
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
search for the word “
Ouvis
” and install the Ouvis app. That looks like this:
Android
Open the app and you will be on the “Home Page”
.
connect one end of the Ethernet
router, and the other end in the
Ethernet port of
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
,
” and install the Ouvis app. That looks like this:
3.
Search and add the camera
a) Click "Add Device
" to open the "
b) Click "LAN Search"
to search all online
c)
The app will find “WIFICAM” and
Search and add the camera
" to open the "
Add Device" page.
to search all online
Ouvis cameras in LAN.
The app will find “WIFICAM” and
its Device ID #. Click on “WIFICAM”.
d) On this page
, leave everything as is. User is admin and the default Password should
remain blank (do NOT put anything here), and click “Done”.
e)
You should now see “WIFICAM” on the “Home Page” and it will show “
the picture frame to the left of “WIFICAM ONLINE”, and you will be on full screen and
watching live video.
, leave everything as is. User is admin and the default Password should
remain blank (do NOT put anything here), and click “Done”.
You should now see “WIFICAM” on the “Home Page” and it will show “
the picture frame to the left of “WIFICAM ONLINE”, and you will be on full screen and
, leave everything as is. User is admin and the default Password should
You should now see “WIFICAM” on the “Home Page” and it will show “
On Line”. Click on
the picture frame to the left of “WIFICAM ONLINE”, and you will be on full screen and
4. Configure the Wi-
Fi connection of the camera
a)
Make sure your smartphone
b)
On the Home Page, as long as “WIFICAM” is “On Line”, click on the “GEAR” icon which is
located to the right of “WIFICAM”. This will now take you to the “Setting” page.
c) Click on the “Wi-
Fi Se
network hotspots near you
Fi connection of the camera
Make sure your smartphone
is on Wi-
Fi (and connected to the 2.4G band of your router).
On the Home Page, as long as “WIFICAM” is “On Line”, click on the “GEAR” icon which is
located to the right of “WIFICAM”. This will now take you to the “Setting” page.
Fi Se
tting”, and then click “Wi-Fi Network List
” to search all wireless
network hotspots near you
.
Fi (and connected to the 2.4G band of your router).
On the Home Page, as long as “WIFICAM” is “On Line”, click on the “GEAR” icon which is
located to the right of “WIFICAM”. This will now take you to the “Setting” page.
” to search all wireless
d)
From the network list, click on the same exact network that your smartphone is
connected to.
e) Then you must
input the correct Wi
Password”
box that open
From the network list, click on the same exact network that your smartphone is
input the correct Wi
-Fi password of your Wi-
Fi network,
box that open
ed up.
From the network list, click on the same exact network that your smartphone is
Fi network,
in the “Wi-Fi
f) Now, click “Done” and the camera will reboot automatically. After rebooting, remove the
Ethernet cord, and on the “Home Page” it should show “WIFICAM ONLINE” and the
camera will now be wireless. However, if WIFICAM does not show “On Line”, you
probably entered the wrong Wi-Fi password. Connect the Ethernet cord back into the
camera, and when it shows “On Line”, go back to step 4 and repeat the steps again.
5. Creating the camera password to ensure your privacy
a) On the “Home Page” there is a yellow warning icon to the right of the “Home Page” to
remind you to create a password for your camera. Click on it and it opens the “User
Setting” page.
b) On this page,
you can set the new Administrator password
the new password, and the camera will reboot
c) After rebooting
, it will automatically login with the new administrator password, and
will now notice that the yellow warning icon does not exist anymore
For online support and details of the functions and features of this camera, go to:
ouvis.zendesk.com
Support email: support@ouvis.online
you can set the new Administrator password, and then click
the new password, and the camera will reboot
.
, it will automatically login with the new administrator password, and
will now notice that the yellow warning icon does not exist anymore
.
For online support and details of the functions and features of this camera, go to:
Support email: support@ouvis.online
, and then click
"Done" to save
, it will automatically login with the new administrator password, and
you
For online support and details of the functions and features of this camera, go to:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
teistes keeltes
- English: Ouvis C2 User manual
Muud dokumendid
-
Maxis TG799vn Omaniku manuaal
-
Technicolor TG789vac MediaAccess Omaniku manuaal
-
-
-
JVC GZ-RX510 Kasutusjuhend
-
Overmax Camspot 4.1 Omaniku manuaal
-
-
Simplex SafeLINC 4100-0160 Installation & Operation Instructions
-
Dell Latitude 5300 2-in-1 Chromebook Enterprise Omaniku manuaal
-
Telewell TW-EA514 Kasutusjuhend
