Dell Latitude 7202 Rugged Omaniku manuaal

Dell Latitude 12 Rugged Tablet – 7202

Getting Started Guide

Introduktionsguide

Installasjonsveiledning

Komma igång

Aloitusopas

Regulatory Model: T03H

Regulatory Type: T03H001

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you

how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

intellectual property laws. Dell

™

and the Dell logo are trademarks of Dell Inc. in the United States and/or other

jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.

2015 - 06

Rev. A00

Contents

1 Finding Information and Resources.................................................................. 4

2 Front and Back View.............................................................................................5

3 Quick Setup............................................................................................................7

4 Removing and Installing Components.............................................................9

Removing the Battery............................................................................................................................9

Installing the Battery............................................................................................................................10

Installing the SIM Card........................................................................................................................ 10

5 Dell Rugged Control Center Application........................................................11

Using the Settings Option in Rugged Control Center....................................................................... 13

Installing the Dell Rugged Control Center......................................................................................... 14

Enabling or Disabling the Keyboard Backlight................................................................................... 15

Changing the Keyboard Backlight Colors ......................................................................................... 15

6 Stealth Mode........................................................................................................16

Turning Stealth Mode On/Off Using Optional Accessory Keyboard ................................................16

Turning Stealth Mode On/Off Using RCC.......................................................................................... 16

Modifying the Stealth Mode Settings............................................................................................ 17

7 Enabling and Disabling Wireless (WiFi) Feature............................................ 18

Enabling or Disabling Wireless (WI-Fi) Feature Using Optional Keyboard Accessory...................... 18

Enabling and Disabling Wireless (WiFi) Feature Using RCC...............................................................18

8 Smart Cards......................................................................................................... 20

9 Specifications...................................................................................................... 21

10 Contacting Dell.................................................................................................25

3

1

Finding Information and Resources

See the safety and regulatory documents that shipped with your computer and the regulatory

compliance website at www.dell.com/regulatory_compliance for more information on:

• Safety best practices

• Regulatory certification

• Ergonomics

See www.dell.com for additional information on:

• Warranty

• Terms and Conditions (U.S. only)

• End User License Agreement

Additional information on your product is available at www.dell.com/support/manuals

4

2

Front and Back View

1. Microphone

2. Camera status light

3. Camera

4. Camera shutter switch

5. Ambient light sensor

6. Stylus

7. Power button

8. Micro serial port

9. USB 3.0 connector with PowerShare

10. Power connector

11. User programmable button 3

12. User programmable button 2

5

13. User programmable button 1

14. Windows button

15. Docking-pogo pins

16. Volume buttons

17. Radio frequency pass-through connector

18. Screen-rotate lock button

19. Dock-guide slots

20. Security-cable slot

21. QuadCool vent-output

22. Memory-card reader

23. HDMI Port

24. Headset connector

25. Microphone

26. Contactless smart card reader

27. Fingerprint reader

28. Smart card reader

29. Rear camera

30. Camera shutter switch

31. Camera flash light

32. Expansion module pogo pins

33. Service tag label

34. QuadCool vent-intake

35. SIM slot (remove battery to access)

36. Battery release latch

37. Battery life meters

38. Battery

WARNING: Your Dell Rugged Tablet is designed to prevent damage due to dust or dirt entering

the QuadCool intake vent. It is however recommended to keep QuadCool vents clean and

unobstructed for optimal performance.

6

3

Quick Setup

WARNING: Before you begin any of the procedures in this section, read the safety information

that shipped with your computer. For additional best practices information, see www.dell.com/

regulatory_compliance

WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors

and power strips vary among countries. Using an incompatible cable or improperly connecting

the cable to the power strip or electrical outlet may cause fire or equipment damage.

CAUTION: When you disconnect the AC adapter cable from the computer, grasp the connector,

not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the

AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid

damaging the cable.

NOTE: Some devices may not be included if you did not order them.

1. Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet.

Figure 1. AC Adapter

2. Connect USB devices, such as a mouse or keyboard (optional).

Figure 2. USB Connector

3. Press the power button to turn on the computer.

Figure 3. Power Button

NOTE: It is recommended that you turn on and shut down your computer at least once before you

install any cards or connect the computer to a docking device or other external device, such as a

printer.

7

8

4

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your

computer.

Removing the Battery

WARNING: Using an incompatible battery may increase the risk of fire or explosion. Replace the

battery only with a compatible battery purchased from Dell. The battery is designed to work with

your Dell tablet. Do not use a battery from any other tablet with your tablet.

WARNING: Before removing or replacing the battery, turn off the tablet, disconnect the AC

adapter from the electrical outlet and the tablet, disconnect the modem from the wall connector

and tablet, and remove any other external cables from the tablet.

WARNING: Not for use in hazardous locations. See installation instructions.

1. To remove the battery:

a. Unlock the battery release latch by sliding towards the battery.

b. Push the button in a downward direction to unlatch the battery bay.

NOTE: There are two battery release buttons for removing Battery 1 and Battery 2 on the

tablet .

2. Lift the batteries away from the tablet.

9

Installing the Battery

1. Slide the battery into its slot until it clicks into place.

2. Lock the battery by sliding the latch away from it.

Installing the SIM Card

NOTE: The SIM card slot is located underneath the battery 2 slot.

1. Remove the battery.

2. To install the SIM card:

a. Press the SIM latch and pull it in an outward direction.

b. Insert the SIM card into the slot.

c. Push the SIM release latch inwards to lock it.

3. Install the battery into the battery bay.

4. Slide the battery release latch in an upwards direction, and then to the right to lock it.

10

5

Dell Rugged Control Center Application

The Dell Rugged Control Center (RCC) is an application designed for your Dell Latitude 12 Rugged Tablet,

which enables you to perform several important tasks on the tablet. After you install the Dell Rugged

Control Center application on your tablet, you can view all the basic features, such as Wi-Fi, Bluetooth,

camera, volume, brightness, and so on.

In addition, this application also enables you to add a shortcut of any feature onto it. By using this

application, you can directly control or adjust all the important features on your tablet.

You can launch the application by clicking the Rugged Control Center icon, available on the desktop. You

can also start the RCC application from the bottom-right corner of the taskbar.

The following table shows the feature description of the Rugged Control Center Application:

Feature Description

Allows you to enable or disable the airplane mode.

Allows you to enable or disable the WLAN.

NOTE: To connect to the WLAN, make sure

you have your network configured.

11

Feature Description

Allows you to enable or disable the WWAN /

Mobile broadband service (if configured).

Allows you to enable or disable Bluetooth.

Allows you to turn on or off the built-in flashlight.

Allows you to enable or disable the Automatic

Light Sensor.

Launches the camera application.

Launches the GPS control panel, which allows you

to enable or disable the GPS. If you enable the

GPS, the control panel will also show your current

location, along with the time, date, latitude, and

longitude.

Launches the Window panel to select the display

option, if you have connected to an external

monitor or to any other source.

Allows you to increase or decrease the brightness

in the display.

Allows you to increase or decrease the volume of

the speakers.

NOTE: The options that are displayed in the RCC home screen are the default options. You can add

a feature to the application, by clicking the

icon.

12

Using the Settings Option in Rugged Control Center

You can also touch the option from the top-right corner of the RCC application to explore more

options.

The following table shows the feature description available in the Settings option of the RCC Application:

Feature Description

Launches the Windows control panel for pen and

touch settings.

NOTE: This option is compatible only if you

have the optional keyboard accessory for

your tablet.

Launches a control panel to adjust settings for the

optional backlit keyboard accessory (if configured

with the optional keyboard accessory). The

control panel also allows you to set backlight

colors and adjust brightness and timeout settings.

Launches a control panel to adjust Stealth Mode

settings. The control panel also allows you to set

which functionality is disabled when you enter

Stealth Mode.

13

Feature Description

Launches a control panel to assign actions to the

3 programmable buttons on the front of the tablet.

Launches the Windows control panel for battery

settings.

Launches the Windows control panel.

Launches the control panel to adjust settings of

the RCC application.

Installing the Dell Rugged Control Center

NOTE:

• Dell Rugged Control Center is compatible only with Windows 8 or higher versions of operating

systems.

• Before you install this application, make sure you that have the latest version of the setup file

from the Dell.com/support page for Dell Latitude 12 Rugged Tablet 7202.

• After you install or uninstall the Dell Rugged Control Center application on your tablet, a reboot

is recommended.

1. Double-click the executable file.

The Setup Wizard page appears.

2. Click Next.

The Language Selection page appears.

3. Select the language from the drop-down menu and click Next.

NOTE: The default language is English.

4. Click Install.

5. Click Yes to provide the administrator rights to begin the installation process.

The installation process will now begin.

6. After the installation is successful, click Finish.

You can now see the Rugged Control Center icon on your desktop.

14

Enabling or Disabling the Keyboard Backlight

NOTE: This feature can be used only if the tablet is connected to an external keyboard accessory

(sold separately).

1. Launch the Rugged Control Center application.

2. Press the Settings button on the top-right corner.

3.

Press the Backlit Keyboard button to access the Backlit Keyboard control panel.

4. Adjust the required parameters for Backlight settings and Backlight colors.

Changing the Keyboard Backlight Colors

1. Press <Fn> + < C> keys to cycle through the available backlight colors.

NOTE: Press <Fn> + < C> keys to cycle through the available backlight colors.

2. Press <Fn> + < F10> keys to adjust the brightness.

15

6

Stealth Mode

Latitude fully rugged products come equipped with a Stealth mode. Stealth mode allows you to turn off

the Display, all the LED lights, internal speakers, the fan and all wireless radios with a single key

combination.

NOTE: This mode is aimed at using the tablet in covert operations. When the stealth mode is

activated, the tablet remains functional but will not emit any light or sound.

You can activate the Stealth Mode, using the Rugged Control Center application and using the optional

keyboard accessory.

Turning Stealth Mode On/Off Using Optional Accessory

Keyboard

NOTE: The following steps are applicable only if you have attached the optional accessory keyboard

to your tablet. Stealth mode can be setup within the tablet by using the Rugged Control Center

(RCC) application pre-loaded on the device.

1. Press the <Fn> + <F7> key combination (<Fn> key not needed if Fn lock is activated) to turn on

stealth mode.

NOTE: Stealth mode is a secondary function of the <F7> key. The key can be used to perform

other functions on the computer when not used with the <Fn> key to activate stealth mode.

2. All the lights and sounds are turned off.

3. Press the <Fn> + <F7> key combination again to turn off the stealth mode.

Turning Stealth Mode On/Off Using RCC

1. Launch the Rugged Control Center application on your tablet.

2. From the main screen, press the Settings button > Programmable Buttons.

16

3. Set any 3 programmable buttons to enable or disable the Stealth Mode.

4. Use the selected programmable buttons to enable or disable the Stealth Mode.

Modifying the Stealth Mode Settings

You can also modify your desired features to disable in the stealth mode settings. To modify the stealth

mode settings:

1. Launch the Rugged Control Center application on your tablet.

2. From the main screen, press the Settings button > Stealth Mode.

3. Select the features that you want to disable in the stealth mode. For example: Volume, Wireless,

Display, and so on.

17

7

Enabling and Disabling Wireless (WiFi)

Feature

You can enable or disable the wireless (Wi-Fi) feature, using the optional keyboard accessory and using

the programmable buttons in RCC application.

NOTE: WiFi can also be enabled/disabled by using the user defined programmable buttons on the

tablet.

Enabling or Disabling Wireless (WI-Fi) Feature Using

Optional Keyboard Accessory

1. Press the <Fn> + <PrtScr> keys to enable wireless feature.

2. Press the<Fn> + < PrtScr> keys again to disable wireless feature.

Enabling and Disabling Wireless (WiFi) Feature Using RCC

1. Launch the Rugged Control Center application on your tablet.

2. Press the Settings button on the top-right corner .

3. Press Programmable buttons .

4. Set any of the 3 programmable buttons to Wireless on/off.

18

5. Use the programmed button to Enable/Disable Wireless networks on the tablet.

19

8

Smart Cards

There are two main types of Smart or Common Access Cards (CAC):

1. Enclosed Smart Cards — These cards have a contact area with many gold plated connection pads.

When inserted into a card reader, the information from the chip can be read and written

Insert the card into the smart card slot with the gold contact pad facing upward and pointing toward

the smart card slot. Slide the card into the slot until it is fully seated in its connector.

2. Contactless Smart Cards — These cards do not require any physical contact with the reader. The

chip communicates with the card reader through RFID induction technology.

These cards require only close proximity to an antenna of a card reader to complete transactions.

20

Leht laaditakse ...

Dell Latitude 7202 Rugged Omaniku manuaal

Dell Latitude 7202 Rugged Omaniku manuaal

teistes keeltes

Seotud paberid

Muud dokumendid