Sony KD-55AG8 Omaniku manuaal

D-868-100-12(1)

SU-WL850

Wall-Mount

Bracket

Installation Information

GB

Informations d’installation

FR

Información de instalación

ES

Installationsinformationen

DE

Installatie-informatie

NL

Informazioni sull’installazione

IT

Installationsinformation

SE

Informacje dotyczące instalacji

PL

Informações de instalação

PT

Oplysninger om montering

DK

Asennustiedot

FI

Installasjonsveiledning

NO

Πληροφορίες εγκατάστασης

GR

Montaj Bilgileri

TR

Szerelési információk

HU

Instalační informace

CZ

Informácie týkajúce sa montáže

SK

Informaţii de instalare

RO

Информация за монтаж

BG

Информация по установке

RU

Інформація про встановлення

UA

Paigaldusteave

EE

Uzstādīšanas informācija

LV

Montavimo informacija

LT

Navodila za uporabo

SI

Informacije za instalaciju

HR

Орнату ақпараты

KZ

Informacije za montažu

SR

הנקתה תוארוה

HE

− 2 (GB) −

Installation Information for

Using Sony Wall-Mount Bracket (SU-WL850)

Supported models:

KD-65AG8 / 55AG8

To Customers

For product protection and safety reasons, Sony strongly recommends that installation of your TV

be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors

Provide full attention to safety during the installation, periodic maintenance and examination of this

product.

Sufficient expertise is required for installing this product, especially to determine the

strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment

of this product to the wall to Sony dealers or licensed contractors and pay adequate

attention to safety during the installation. Sony is not liable for any damage or injury

caused by mishandling or improper installation.

For Safety and proper installation, follow the Wall-mount Bracket Operation Instructions, TV Setup

Guide and the directions in this manual.

− 3 (GB) −

GB

Wall-Mount Bracket

On Safety

Thank you for purchasing this product.

To Customers

Installing the TV to the Wall

WARNING

PROFESSIONAL INSTALLATION REQUIRED

This product should only be installed by

a professional installer who is trained to

determine the strength of the wall for

withstanding the TV’s weight. If it is not

properly secured during installation, the

TV may fall and cause serious injury.

Sony is not liable for any damage or

injury caused by mishandling or

improper installation, or installing any

other than the specified product. Your

Statutory Rights (if any) are not affected.

To Sony dealers

Sufficient expertise is required for

installing this product. Be sure to read

this instruction manual thoroughly to do

the installation work safely. Sony is not

liable for any damages or injury caused

by mishandling or improper installation.

Please give this manual to the customer

after installation.

This instruction manual shows the correct

handling of the product and important

precautions necessary to prevent accidents.

It is your responsibility to read, thoroughly

understand, and follow all instructions in this

instruction manual. Failure to do so may

result in serious personal injury or property

damage, and may void the warranty. Keep

this manual available for future reference.

Products by Sony are designed with safety in

mind. If the products are used incorrectly,

however, it may result in a serious injury

through fire, electric shock, the product

toppling over, or the product dropping. Be

sure to observe the precautions for safety to

prevent such accidents.

CAUTION

Specified products

This Wall-Mount Bracket is designed for use

with the products specified TVs. For TVs,

refer to their “Reference Guide” to verify that

the Wall-Mount Bracket can be used.

To Customers

WARNING

If the following precautions are not

observed, serious injury or death

through fire, electric shock, or the

product dropping can result.

Be sure to subcontract

the installation to

licensed contractors and

keep small children away

during the installation.

If the Wall-Mount Bracket or the TV is not

installed correctly, the following accidents

may occur. Be sure licensed contractors carry

out installation.



The TV may fall and cause a serious injury

such as a bruise or a fracture.



If the wall on which the Wall-Mount

Bracket is installed is unstable, uneven, or

not perpendicular to the floor, the unit

may fall and cause injury or property

damage. The wall should be capable of

supporting a weight of at least six times

the TV weight.

(Refer to your TV’s “Reference Guide” for

its weight.)



If the installation of the Wall-Mount

Bracket on the wall is not sufficiently

sturdy, the unit may fall and cause injury or

property damage.

Be sure to subcontract

moving or dismounting

of the TV to licensed

contractors.

If persons other than licensed contractors

transport or dismount the TV, it may fall and

cause injury or property damage. Be sure

that two or more persons (three or more

persons for 75 inches and above TV set) carry

or dismount the TV.

Do not remove screws,

etc., after mounting the

TV.

If you do so, the TV may fall and cause injury

or property damage.

Do not make alterations

to the parts of the Wall-

Mount Bracket.

If you do so, the Wall-Mount Bracket may fall

and cause injury or property damage.

Do not mount any

equipment other than

the specified product.

This Wall-Mount Bracket is designed for use

with the specified product only. If you mount

equipment other than specified, it may fall or

break, and cause injury or property damage.

Do not apply any load

other than the TV on the

Wall-Mount Bracket.

Do not shake the TV left/

right, up/down.

If you do so, the TV may fall and cause injury

or property damage.

Do not lean on or hang

from the TV.

Do not lean on or hang from the TV as it may

fall on you and cause serious injury.

CAUTION

If the following precautions are not

observed, injury or property damage

may occur.



Be careful to not pinch your fingers while

handling the Wall-Mount Bracket or

swiveling the TV set.



While swiveling the TV set, handle it with

caution and take care not to hit any people

nearby.



Be sure to store the unused parts in a safe

place for future use.

Keep them away from children.

Do not handle the

product with excessive

force during cleaning or

maintenance.

Do not apply excessive force on the topside

of the TV. If you do so, the TV may fall and

cause injury or property damage.

Precautions



If you use the TV installed on the

Wall-Mount Bracket for a long time, the

wall behind or above the TV may become

discolored or the wallpaper may come

unstuck, depending on the material of the

wall.



If the Wall-Mount Bracket is removed after

installing it on the wall, the screw holes are

left.



Do not use the Wall-Mount Bracket in a

place where it is subjected to mechanical

vibrations.

Installing the Wall-

Mount Bracket

To Sony Dealers

WARNING

The following instructions are for Sony

dealers only. Be sure to read safety

precautions described above and pay

special attention to safety during the

installation, maintenance and checking

of this product.

− 4 (GB) −

Do not install the Wall-

Mount Bracket on wall

surfaces where the

corners or the sides of

the TV protrude away

from the wall surface.

Do not install the Wall-Mount Bracket on wall

surfaces such as a pillar, where the corners

or the sides of the TV protrude away from

the wall surface. If a person or object

happens to hit the protruded corner or side

of the TV, it may cause injury or property

damage.

Do not install the TV over

or under an air-

conditioner.

If the TV is exposed to water leaks or air

current from an air conditioner for a long

time, it may cause a fire, an electric shock or

a malfunction of the TV.

Be sure to install the

Wall-Mount Bracket

securely to the wall

following the instructions

in this instruction

manual.

If any of the screws are loose or fall out, the

Wall-Mount Bracket may fall and cause injury

or property damage. Be sure to use the

appropriate screws for the material of the

wall and install the unit securely using four

screws of 8 mm diameter (or equivalent).

Be sure to use the

supplied screws and

attachment parts

properly following the

instructions given in

this instruction

manual. If you use

substitute items, the

TV may fall and cause

bodily injury to

someone or damage to

the TV.

Be sure to assemble the

bracket properly

following the instructed

procedure explained in

this instruction manual.

If any of the screws are loose or fall out, the

TV may fall and cause bodily injury to

someone or damage to the TV.

Be sure to tighten the

screws securely in the

designated position.

If you fail to do so, the TV may fall and cause

bodily injury to someone or damage to the

TV.

Be careful not to subject

the TV to shock during

installation.

If the TV is exposed to shock, it may fall or

break apart. This may cause injury.

Be sure to install the TV

on a wall that is both

perpendicular and flat.

If you fail to do so, the TV may fall and cause

injury.

After proper installation

of the TV, secure the

cables properly.

If people or objects get tangled with cables,

this may result in injury or damage to the TV.

Do not allow the mains

lead or the connecting

cable to be pinched.

If the mains lead or the connecting cable is

pinched between the unit and the wall or is

bent or twisted by force, the internal

conductors may become exposed and cause

a short circuit or an electrical break. This may

cause a fire or an electric shock.

The screws needed to

secure the Wall-Mount

Bracket to the wall are

not supplied.

Use the appropriate screws for the wall

material and structure when mounting the

Wall-Mount Bracket.

− 5 (GB) −

GB

Before getting started

Firstly, check the type of the wall to install the TV.

What is your wall made of?

Dry wall with studs

Precautions



Maximum dry wall thickness:

16 mm.



Ensure that the inner wood stud size is at

least 51 x 102 mm for common or

38 x 89 mm for nominal.



Keep minimum 406 mm horizontal space

between fasteners.

Solid Concrete or Concrete Block

Precautions



Mount the Wall-Mount Bracket directly

onto the solid concrete wall.



Ensure that the thickness of solid concrete

wall is at least 203 mm.



Ensure that the size of each concrete block

is at least 203 x 203 x 406 mm.

− 6 (GB) −

Preparing for installation



Have the TV’s Reference Guide and Setup

Guide at hand before installation.



Confirm the installing position of your TV.



Prepare four screws of 8 mm diameter and

four proper washers (not supplied).

Select screws suitable for the material of the

wall.

Checking the parts

Supplied with SU-WL850



Verify that all the parts are included.

 WM1 (1)  WM2 (1)

 WM3 (4)  M6L20 (4)

 WT1 (6)

− 7 (GB) −

GB

Tools needed

*1

5.5 mm 10 mm

*2

1.5 N·m

{15 kgf·cm}

(4)

*3

(4)

*2

8 mm x 60 mm

(4)

*3

*1 Only for dry wall with studs

*2 Only for solid concrete or concrete block

*3 Be careful when selecting screws and washers

≤7.5 mm

− 8 (GB) −

 Attaching TV to the Dry Wall with Studs

Dry wall with studs

WM1

Installing the Wall-Mount Bracket to the wall

1 Decide on the installation location.

Make sure that the wall has enough space for the TV and is capable of supporting a weight of at

least six times that of the TV.

Refer to the following table on installing the TV to the wall. Refer to your TV’s Reference Guide

for the TV’s weight.

 







*1

− 9 (GB) −

GB





(mm)

KD

A B C D E

F

*2

G

*2

(°)

65AG8 1,450 834 341 76 61 280 18

55AG8 1,229 710 301 59 61 280 20

TV installation dimensions table (mm)

Figures in the table may differ slightly depending on the installation.

*1 (Screen centre point)

*2 (Approx.)

Note



When your TV is installed on the wall, the upper side of the TV slightly leans forward.

− 10 (GB) −

3 Align

WM1

to the wall and

make four marks aligned with

the studs.

WM1

Note



Use a level to check whether

WM1

is level.

4 Drill upper pilot holes on the

marks.

75 mm

5.5 mm

Note



Be sure to drill into the centre of wood stud.



Pilot holes must be drilled to a depth of 75 mm, using

a 5.5 mm diameter drill bit.

5 Install

WM1

on the wall using

suitable screws (not supplied)

and washers (not supplied).

8 mm × 60 mm

Note



Use a level to check whether

WM1

is level.

Precaution



Do not over-tighten wooden screw 8 mm × 60 mm.

Improper tightening could reduce the holding power

of wooden screw 8 mm × 60 mm.

Note



We recommend you to check the

position of TV in the viewing

environment.

2

406 mm

− 11 (GB) −

GB

Preparing for the installation

of the TV

Make sure to attach the Table-Top stand

before installing the TV to the wall by referring

to the Setup Guide.

1 Remove the screws from the

rear of the TV.

Note



Be sure to store the removed screws in a safe place,

keeping them away from children.

2 Attach

WM3

.

WM3

6 Drill lower pilot holes on the

marks. (Refer step 4 for the drill

instruction.)

7 Fit the suitable screws and

washers to the holes.

Note



Use a level to check whether the Wall-Mount Bracket

is level.

8 Pull out the arm of the bracket

to the end.

− 12 (GB) −

3 Attach the

WM2

to the TV using

M6L20

.

M6L20

WM2

4 Detach the Table-Top Stand

from the TV.

Note



Be careful when lifting the TV as the Table-Top Stand

is detached, the Table-Top Stand may topple over

and cause personal injury.



Take care when removing the Table-Top Stand from

the TV to prevent it from falling over and damaging

the surface that the TV is sitting on.



Be sure to store the removed screws in a safe place,

keeping them away from children.

Installing the TV on the wall

1

2

− 13 (GB) −

GB

3 Screw the left and right side of

the Wall-Mount Bracket.

M6L20

4

5 When moving the TV, hold it

firmly from the bottom.

6

− 14 (GB) −

WARNING



Be sure that two or more persons (three or more

persons for 75 inches and above TV set) hold the TV

when carrying it.

Confirming the completion of

the installation

Check the following points.



The cord and the cable are not twisted or

pinched.

WARNING



Improper placement of the mains lead, etc. may cause fire

or electric shock through a short circuit. Be sure to

confirm the completion of the installation for safety.

− 15 (GB) −

GB

 Attaching the Wall-Mount Bracket to the Solid Concrete or

Concrete Block

Solid Concrete or Concrete Block

WM1

Installing the Wall-Mount Bracket to the wall

1 Decide on the installation location.

Make sure that the wall has enough space for the TV and is capable of supporting a weight of at

least six times that of the TV.

Refer to the following table on installing the TV to the wall. Refer to your TV’s Reference Guide

for the TV’s weight.

 







*1

− 16 (GB) −





(mm)

KD

A B C D E

F

*2

G

*2

(°)

65AG8 1,450 834 341 76 61 280 18

55AG8 1,229 710 301 59 61 280 20

TV installation dimensions table (mm)

Figures in the table may differ slightly depending on the installation.

*1 (Screen centre point)

*2 (Approx.)

Note



When your TV is installed on the wall, the upper side of the TV slightly leans forward.

− 17 (GB) −

GB

Note



We recommend you to check the

position of TV in the viewing

environment.

2 Align

WM1

to the wall and

make four marks.

WM1

Note



Use a level to check whether

WM1

is level.

3 Drill pilot holes on the marks.

10 mm

75 mm

4

5 Install

WM1

on the wall using

suitable screws (not supplied)

and washers (not supplied).

8 mm × 60 mm

Note



Use a level to check whether the Wall-Mount Bracket

is level.

Precaution



Do not over-tighten wooden screw 8 mm × 60 mm.

Improper tightening could reduce the holding power

of wooden screw 8 mm × 60 mm.

− 18 (GB) −

6 Pull out the arm of the bracket

to the end.

Preparing for the installation

of the TV

Make sure to attach the Table-Top stand

before installing the TV to the wall by referring

to the Setup Guide.

1 Remove the screws from the

rear of the TV.

Note



Be sure to store the removed screws in a safe place,

keeping them away from children.

2 Attach

WM3

.

WM3

− 19 (GB) −

GB

3 Attach the

WM2

to the TV using

M6L20

.

M6L20

WM2

4 Detach the Table-Top Stand

from the TV.

Note



Be careful when lifting the TV as the Table-Top Stand

is detached, the Table-Top Stand may topple over

and cause personal injury.



Take care when removing the Table-Top Stand from

the TV to prevent it from falling over and damaging

the surface that the TV is sitting on.



Be sure to store the removed screws in a safe place,

keeping them away from children.

Installing the TV on the wall

1

2

− 20 (GB) −

3 Screw the left and right side of

the Wall-Mount Bracket.

M6L20

4

5 When moving the TV, hold it

firmly from the bottom.

6

Leht laadib ...

Sony KD-55AG8 Omaniku manuaal

See käsiraamat sobib ka

Sony KD-55AG8 Omaniku manuaal

teistes keeltes

Seotud paberid

Muud dokumendid