Samsung NZ64N7757FK/E1 Kasutusjuhend

Kategooria
Pliidiplaadid
Tüüp
Kasutusjuhend

See juhend sobib ka

Induction Hob
User manual
NZ64N7757GK / NZ64N7757FK
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 1 2/19/2018 1:13:39 PM
2 English
Contents
Contents
Keep Warm 21
Timer 22
Pause/Resume 22
Quick stop 23
Switching the appliance off 23
Child safety lock 23
Maximum power limit 24
Sound on/off 25
Smart Connect 25
Hood control 26
Maintaining your appliance 26
Hob 26
Light soiling 26
Stubborn soiling 27
Problem dirt 27
Hob frame (option) 28
To avoid damaging your appliance 28
Troubleshooting and service 28
Troubleshooting 28
Service 30
Technical data 30
Technical data 30
Cooking zones 30
Product information 31
Appendix 31
Open Source Announcement 31
Contents
Using this manual 3
The following symbols are used in this User Manual: 3
Model name & serial number 3
Safety instructions 3
Disposing of the packaging material 7
Proper disposal of your old appliance 7
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 7
Installing the hob 8
Safety instructions for the installer 8
Tools you will need 8
Connecting to the mains power supply 8
Installing into the countertop 9
Components 11
Before you start 12
Cooking zones 12
Control panel 12
Induction heating 13
Safety shutoff 14
Residual heat indicator 14
Temperature detection 14
Cookware 15
Using the touch buttons 18
Operating noises 18
Initial cleaning 18
Operation 19
Switching the appliance on 19
Selecting cooking zone and power level 19
Power Boost 20
Flex zone Plus 20
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 2 2/19/2018 1:13:40 PM
English 3
Using this manual
Using this manual
Please take the time to read this owner’s manual, paying particular attention to the
safety information contained in the following section, before using your appliance.
Keep this manual for future reference.
If transferring ownership of the appliance, please remember to pass the manual on
to the new owner.
The following symbols are used in this User Manual:
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property
damage.
CAUTION
To reduce the risk of re, explosion, electric shock, or personal injury when using
your hob, follow these basic safety precaution.
NOTE
Useful tips, recommendations, or information that helps users manipulate the
product.
Model name & serial number
Both the model name and the serial number are labeled underneath the hob base.
For later use, write down the information or attach the additional product label
(located on the top of the product) onto the current page.
Model Name
Serial Number
Safety instructions
The safety aspects of this appliance comply with all accepted technical and safety
standards. However, as manufacturers we also believe it is our responsibility to
familiarize you with the following safety instructions.
WARNING
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
The means for disconnection must be incorporated in the xed
wiring in accordance with the wiring rules.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 3 2/19/2018 1:13:40 PM
4 English
Safety instructions
Safety instructions
The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
The appliance must not be installed behind a decorative door in
order to avoid overheating.
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements. Children less than 8 years of age shall be kept away
unless continuously supervised.
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in a re.
NEVER try to extinguish a re with water, but switch off the
appliance and then cover ame e.g. with a lid or a re blanket.
WARNING: Danger of re: Do not store items on the cooking
surfaces.
WARNING: Use only hob guards designed by the manufacturer
of the cooking appliance or indicated by the manufacturer
of the appliance in the instructions for use as suitable or hob
guards incorporated in the appliance. The use of inappropriate
guards can cause accidents.
This Appliance should be allowed to disconnection from the
supply after installation. The disconnection may be achieved by
having the plug accessible or by incorporating a switch in the
ed wiring in accordance with the wiring rules.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied pesons in
order to avoid a hazard.
The method of xing stated is not to depend on the use of
adhesives since they are not considered to be a reliable xing
means.
WARNING: If the surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
During use the appliance becomes hot. Care should be taken to
avoid touching heating elements inside the hob.
WARNING: Accessible parts may become hot during use. Young
children should be kept away.
A steam cleaner is not to be used.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
After use, switch off the hob element by its control and do not
rely on the pan detector.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 4 2/19/2018 1:13:40 PM
English 5
Safety instructions
CAUTION
Be sure the appliance is properly installed and grounded by a
qualied technician.
The appliance should be serviced only by qualied service
personnel. Repairs carried out by unqualied individuals may
cause injury or serious malfunction. If your appliance is in need
of repair, contact your local service centre. Failure to follow
these instructions may result in damage and void the warranty.
Flush - mounted appliances may be operated only after they
have been installed in cabinets and workplaces that conform
to the relevant standards. This ensures sufcient protection
against contact for electrical units as required by the essential
safety standards.
If your appliance malfunctions or if fractures, cracks or splits
appear:
switch off all cooking zones;
disconnect the hob from the mains supply; and
contact your local service centre.
If the hob cracks, turn the appliance off to avoid the possibility
of electric shock. Do not use your hob until the glass surface
has been replaced.
The surfaces are liable to get hot during use.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children unless they are
older than 8 and supervised.
Keep the appliance and its cord out of reach of children less
than 8 years.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 5 2/19/2018 1:13:40 PM
6 English
Safety instructions
Safety instructions
Always keep the control panels clean and dry.
Never place combustible items on the hob, it may cause re.
There is the risk of burns from the appliance if used carelessly.
Cables from electrical appliances must not touch the hot surface
of the hob or hot cookware.
Do not use the hob to dry clothes.
Users with Pacemakers and Active Heart Implants must
keep their upper body at a minimum distance of 30 cm from
induction cooking zones when turned on. If in doubt, you
should consult the manufacturer of your device or your doctor.
(Induction hob model only)
Do not attempt to repair, disassemble, or modify the appliance
yourself.
Always turn the appliance off before cleaning.
Clean the hob in accordance with the cleaning and care
instructions contained in this manual.
Keep pets away from the appliance because pets may step on
the controls of the appliance, causing an malfunction.
Do not use the hob to heat aluminium foil, products wrapped
in aluminium foil or frozen foods packaged in aluminium
cookware.
Liquid between the bottom of the pan and the hob can produce
steam pressure. Which may cause the pan to jump.
Always ensure that the hotplate and the base of the pan are
kept dry.
The cooking zones will become hot when you cook.
Always keep small children away from the appliance.
Keep all packaging materials well out of the reach of children,
as packaging materials can be dangerous to children.
This appliance is to be used only for normal cooking and frying
in the home. It is not designed for commercial or industrial use.
Never use the hob for heating the room.
Take care when plugging electrical appliances into mains
sockets near the hob. Mains leads must not come into contact
with the hob.
Overheated fat and oil can catch re quickly. Never leave
surface units unattended when preparing foods in fat or oil, for
example, when cooking chips.
Turn the cooking zones off after use.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 6 2/19/2018 1:13:40 PM
English 7
Safety instructions
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature
indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed
of with other household waste at the end of their working
life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where
they purchased this product, or their local government
ofce, for details of where and how they can take these
items for environmentally safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product
and its electronic accessories should not be mixed with
other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product specic
regulatory obligations e.g. REACH visit: samsung.com/uk/aboutsamsung/
samsungelectronics/corporatecitizenship/data_corner.html
Disposing of the packaging material
WARNING
All materials used to package the appliance are fully recyclable. Sheet and hard
foam parts are appropriately marked. Please dispose of packaging materials and
old appliances with due regard to safety and the environment.
Proper disposal of your old appliance
WARNING
Before disposing of your old appliance, make it inoperable so that it cannot be a
source of danger. To do this, have a qualied technician disconnect the appliance
from the mains supply and remove the mains lead.
The appliance may not be disposed of in the household rubbish.
Information about collection dates and public refuse disposal sites is available
from your local refuse department or council.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 7 2/19/2018 1:13:40 PM
8 English
Installing the hob
Tools you will need
Pencil Phillips Head Screwdriver Ruler or Straightedge
Safety Glasses Saber Saw Drill
Connecting to the mains power supply
Before connecting, check that the nominal voltage of the appliance, that is, the
voltage stated on the rating plate, corresponds to the available supply voltage. The
rating plate is located on the lower casing of the hob.
WARNING
Shut off power to circuit before connecting wires to circuit.
The heating element voltage is AC 230 V
~
. The appliance also works perfectly on
networks with AC 220 V
~
or AC 240 V
~
. The hob is to be connected to the mains
using a device that allows the appliance to be disconnected from the mains at all
poles with a contact opening width of at least 3 mm, eg. automatic line protecting
cut - out, earth leakage trips or fuse.
WARNING
The cable connections must be made in accordance with regulations and the
terminal screws tightened securely.
WARNING
Once the hob is connected to the mains supply, check that all cooking zones are
ready for use by briey switching each on in turn at the maximum setting with
suitable cookware.
Installing the hob
WARNING
Be sure the new appliance is installed and grounded only by qualied personnel.
Please observe this instruction. The warranty will not cover any damage that may
occur as a result of improper installation.
Technical data is provided at the end of this manual.
Safety instructions for the installer
A device must be provided in the electrical installation that allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm. Suitable isolation devices include line
protecting cut - outs, fuses (screw type fuses are to be removed from the
holder), earth leakage trips and contactors.
With respect to re protection, this appliance corresponds to EN 60335 - 2 -
6. This type of appliance may be installed with a high cupboard or wall on one
side.
The installation must guarantee shock protection.
The kitchen unit in which the appliance is tted must satisfy the stability
requirements of DIN 68930.
For protection against moisture, all cut surfaces are to be sealed with a
suitable sealant.
On tiled work surfaces, the joints in the area where the hob sits must be
completely lled with grout.
On natural, articial stone, or ceramic tops, the snap action springs must be
bonded in place with a suitable articial resin or mixed adhesive.
Ensure that the seal is correctly seated against the work surface without any
gaps. Additional silicon sealant must not be applied; this would make removal
more difcult when servicing.
The hob must be pressed out from below when removed.
A board can be installed underneath the hob.
The ventilation gap between the worktop and front of the unit underneath it
must not be covered.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 8 2/19/2018 1:13:41 PM
English 9
Installing the hob
WARNING
Pay attention (conformity) to phase and neutral allocation of house connection and
appliance (connection schemes); otherwise, components can be damaged.
Warranty does not cover damage resulting from improper installation.
WARNING
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualied persons in order to avoid a hazard.
01
02
03
04 06
05
L N
1N
~
(32A)
01 220-240 V
~
04 Blue
02 Brown 05 Gray
03 Black 06 Green/Yellow
01
02
03
04
05
07
06
L1 L2 N
2N
~
(16A): Separate the 2-phase wires
(L1 and L2) before connection.
01 220-240 V
~
05 Blue
02 380-415 V
~
06 Gray
03 Brown 07 Green/Yellow
04 Black
01 04
02
03
05
06
07
L1 N1 L2 N2
2 x 1N
~
(16A): Separate the wires before
connection.
01 220-240 V
~
05 Black
02 Brown 06 Gray
03 Blue 07 Green/Yellow
04 220-240 V
~
WARNING
For correct supply connection, follow the wiring diagram attached near the terminals.
Installing into the countertop
A
A. Serial number
NOTE
Make a note of the serial number on the
appliance rating label prior to installation.
This number will be required in the case
of requests for service and is no longer
accessible after installation, as it is on the
original rating plate on the upperside or
underside of the appliance.
NOTE
Pay special attention to the minimum space and clearance requirements.
NOTE
The bottom of the hob is equipped with a fan. If there is a drawer under the hob
it should not be used to store small objects or paper, since they could damage the
fan or interfere with the cooling if they are sucked into it.
01
02
No. Explanation Size
01 Height of
ventilation hole
Min 2 mm
02 Width of
ventilation hole
560 mm
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 9 2/19/2018 1:13:41 PM
10 English
Installing the hob
Installing the hob
04
05
06
07
08
09
10
11
12
02
03
01
No. Explanation Size
01 Check 4 Point
02 Drill diameter Ø 6
03 Right angle of cutting point 90 °
04 Cutting Width Size 560±1 mm
05 Cutting Depth Size 490±1 mm
06 Curve Size R3
07 Size of table thickness Max 50 mm,
Min 20 mm
08 Distance between end of table and cutting point
(Rear-side)
Min 60 mm
09 Depth of table Min 600 mm
10 Distance between end of table and cutting point
(Left-side)
Min 60 mm
11 Distance between end of table and cutting point
(Right-side)
Min 60 mm
12 Distance between end of table and cutting point
(Front-side)
Min 50 mm
06
07
08
04
02
05
01
03
No. Explanation Size
01 Distance between wall and hob Min 40 mm
02 Size of depth of hob 520 mm
03 Distance between Induction and end of table Min 40 mm
04 Distance between glass and case burner 25 mm
05 Distance between glass and case burner 15 mm
06 Distance between wall and case burner Min 60 mm
07 Size of depth of case burner 480 mm
08 Distance between case burner and end of table Min 50 mm
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 10 2/19/2018 1:13:42 PM
English 11
Installing the hob
05
02
01
03
04
No. Explanation Size
01 Width of rear
ventilation
Min 550 mm
02 Height of rear
ventilation
Min 35 mm
03 Depth of power
cord path
Max 65 mm
04 Width of power
cord path
Max 100 mm
05 Height of block
board
Min 5 mm
01
02
03
No. Explanation Size
01
Size of ventilation
Min 20 mm
02 Min 2 mm
03 Min 20 mm
Components
Induction hob Bracket Spring
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 11 2/19/2018 1:13:42 PM
12 English
Before you start
Before you startBefore you start
Cooking zones
01
02
03
04
01 Induction Flex zone Plus 3300 W with Power Boost 3600 W
02 Induction cooking zone 1400 W with Power Boost 2000 W
03 Induction cooking zone 2200 W with Power Boost 3200 W
04 Control panel
Control panel
01 06 08 10 11 1202
04 05 07 09
03
03
03
03
01 On/Off button Use this button to switch the power supply
on or off completely.
02 Flex zone Plus button Use this button to switch the Flex zone Plus
function on or off.
03 Cooking zone display Displays the power level, activated
functions, residual heat, and information
messages.
04 Cooking zone buttons Use these buttons to select a cooking zone.
05 Keep warm button Use this button to keep cooked food warm.
06 Power level buttons Use these buttons to set the power level of
a cooking zone.
07 Power Boost button Use this button to heat up the contents of
the pan faster than maximum power level.
08 Timer buttons Use these buttons to turn the timer on or
off and set the timer.
09 Timer display Displays the remaining time for the timer.
10 Pause/Resume button Use this button to switch all cooking zones
on to the low power setting (2). (example :
to take a telephone call)
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 12 2/19/2018 1:13:43 PM
English 13
Before you start
Induction heating
A
B
C
A. Induction coil
B. Induced currents
C. Electronic circuits
The Principle of Induction Heating:
When you place your cookware on a
cooking zone and you turn it on, the
electronic circuits in your induction
hob produce “induced currents” in the
bottom of the cookware which instantly
raise cookware’s temperature.
Greater speed in cooking and frying:
As the pan is heated directly and not
the glass, the efciency is greater than
in other systems because no heat is
lost. Most of the energy absorbed is
transformed into heat.
11 Lock button Use this button to switch the Child safey
lock function on or off.
12 Smart Connect button Use this button to switch the Smart Connect
function on or off.
Guide for cooking zone display
Display Meaning
to ,
Selected power level
Residual heat (very hot)
Residual heat (hot)
The child lock is activated
A button is being touched for longer than 8 seconds.
The hob is overheated because of abnormal operation.
(example : operation with empty cookware)
Cookware is unsuitable, too small, or no cookware has been
placed on the cooking zone
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 13 2/19/2018 1:13:43 PM
14 English
Before you start
Before you start
Residual heat indicator
When an individual cooking zone or the hob is turned off, the presence of residual
heat is shown with an , (for “hot”) in the corresponding cooking zone
display. Even after the cooking zone has been switched off, the residual heat
indicator goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
WARNING
As long as the residual heat indicator is illuminated, there is a risk of burns.
WARNING
If the power supply is interrupted, the
, symbol will go out and information
about residual heat will no longer be available.
However, it may still be possible to burn yourself. This can be avoided by always
taking care when near the hob.
Temperature detection
If for any reason the temperatures on any of the cooking zones were to exceed the
safety levels, the cooking zone will automatically reduce to a lower power level.
When you have nished using the hob, the cooling fan will continue to run until
the hob’s electronics has cooled down. And the cooling fan switches itself off
depending upon the temperature of the electronics.
Safety shutoff
If one of the cooking zones is not switched off or the power level is not adjusted
after an extended period of time, that particular cooking zone will automatically
switch itself off.
Any residual heat will be indicated with , (for “hot”) in the corresponding
cooking zone display.
The cooking zones switch themselves off at the following times.
Power level Switch off
1-3 After 6 hours
4-6 After 5 hours
7-9 After 4 hours
10-15 After 1.5 hours
NOTE
If the Hob is overheated because of abnormal operation,
will be displayed.
And the Hob will be switched off.
NOTE
If cookware is unsuitable, too small, or no cookware has been placed on the
cooking zone,
will be displayed.
And after 1 minute the corresponding cooking zone will be switched off.
NOTE
Should one or more of the cooking zones switch off before the indicated time has
elapsed, see the “Troubleshooting” on page 28.
Other reasons why a cooking zone will switch itself off
All cooking zones will switch themselves off if liquid boils over on the control
panel.
The automatic shutoff will also be activated if you place a damp cloth on the
control panel. In both of these instances, the appliance will need to be switched on
again using the
button after the liquid or the cloth has been removed.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 14 2/19/2018 1:13:44 PM
English 15
Before you start
Cookware for induction cooking zones
The Induction burner can only be turned on when cookware with a magnetic base
is placed on one of the cooking zones. You can use the cookware identied as
suitable below.
Material Suitability
Steel, enameled steel, cast iron Yes
Stainless steel Yes (If magnet sticks to the bottom of the
cookware)
Aluminum, copper, brass, glass,
ceramic, porcelain
No
NOTE
Cookware appropriate for induction cooking is labelled as suitable by the
manufacturer.
Certain cookware can make noises when being used on induction cooking
zones.
These noises do not indicate that the hob is malfunctioning and do not affect
its operation in any way.
Special stainless-steel cookware may not be suitable for induction cooking.
Check if the base of the cookware is attracted by a magnet.
Cookware
Use at-bottomed cookware that completely
contacts the entire cooking zone. Check
for atness by rotating a ruler across
the bottom of the cookware. Be sure to
follow all the recommendations for using
cookware.
Use cookware made with the correct material for induction cooking.
Use quality cookware with heavier bottoms for better heat distribution. This
gives best cooking results.
Match the cookware size to the quantity of food being prepared.
Do not let cookware boil dry. This may cause permanent damage in the form
of breakage, fusion, or marring that can affect the ceramic hob. (This type of
damage is not covered by your warranty).
Do not use dirty cookware or cookware with heavy grease buildup. Always
use cookware that is easy to clean after cooking.
CAUTION
The cooking zones may appear cooled down after they have been turned off.
However, the glass surface may be hot from residual heat transferred from the
cookware. The risk of burns is still present.
Do not touch hot cookware directly with your hands. Always use oven mitts or
pot holders to protect your hands from burns.
Do not slide cookware across the hob surface. Doing so may permanently
damage the hob.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 15 2/19/2018 1:13:44 PM
16 English
Before you start
Before you start
Other induction cookware
Some cookware has thin magnetic material on the bottom to work with an
induction heating hob. These cookware has weak magnetism and may not work
well. (Weak magnetism means a magnet does not stick rmly or the area where
the magnet sticks is small.)
B
A
A. Area where magnet does not
stick
B. Area where magnet sticks
Even though cookware are designed
for an induction hob, the heating
performance could be weak or
sometimes the hob may not detect the
cookware depending on the size and
strength of the magnetic area on the
bottom of the cookware.
When using large cookware with a
smaller ferromagnetic element, only
the ferromagnetic element heats up.
Consequently, heat might not be uniformly
distributed.
Cookware sizes for induction cooking zones
Induction cooking zones adapt automatically to the bottom size of the cookware
up to a certain limit. However, the magnetic part of the bottom of the cookware
must have a minimum diameter depending upon the size of the cooking zone.
Cooking zone Minimum diameter of the bottom of the cookware
Flex Zone Front or rear
Flex Plus
140 mm
Complete Flex
Plus
240 mm (for the longer side of an oval or sh
kettle)
Right Rear cooking zone 100 mm
Right Front cooking zone 140 mm
For best results, use cookware whose
ferromagnetic diameter match that of a
burner. If the cookware is not sensed by the
burner, try a smaller sized burner.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 16 2/19/2018 1:13:45 PM
English 17
Before you start
Suitability test
Cookware is suitable for induction cooking
if a magnet sticks to the bottom of the
cookware and the cookware is labelled as
suitable by the cookware manufacturer.
You can recognise good cookware by their bases. The base is supposed to be
as thick and at as possible.
When buying new cookware, pay special attention to the diameter of the base.
Manufacturers often give only the diameter of the upper rim.
Do not use cookware which have damaged bases with rough edges or burrs.
Damaged cookware can scratch the ceramic hob permanently if you slide
them across the surface.
When cold, cookware bases are normally bowed slightly inwards (concave).
They must not be bent outwards (convex).
If you want to use a special type of cookware, for example, a pressure cooker,
a simmering pan, or a wok, please follow the manufacturer’s instructions.
Correct positioning
Correct Incorrect
Flat-bottomed cookware and straight
sides
Cookware with curved or warped
bottoms or sides
The cookware meets or exceeds the
recommended minimum size for the
cooking zone.
The cookware does not meet the
minimum size required for the current
cooking zone.
The cookware rests completely on the
hob surface.
The cookware rests on the hob trim or
does not rest completely on the hob
surface.
The cookware is properly balanced. The heavy handle causes the cookware
to tilt.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 17 2/19/2018 1:13:46 PM
18 English
Before you start
Before you start
Energy saving tips
Follow these tips to save power
consumption.
Always put cookware on a cooking
zone before you turn the corresponding
burner on.
Keep the cooking zones and cookware
bases clean. Otherwise, more power will
be consumed.
Firmly close the cover of cookware
if available. This will reduce power
consumption.
Turn the working burner off before
the end of the cooking time. Use the
residual heat to keep food warm.
Using the touch buttons
To operate the touch buttons, touch the desired button with the tip of your pointed
nger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one button when operating the appliance. If
your nger is too at on the button, an adjacent button may be actuated as well.
Operating noises
If you can hear.
Cracking noise: cookware is made of different materials.
Whistling: you use more than two cooking zones and the cookware is made of
different materials.
Humming: you use high power levels.
Clicking: electric switching occurs.
Hissing, Buzzing: the fan operates.
The noise are normal and do not refer to any defects.
WARNING
Do not use cookware of different size and material.
Using cookware of different sizes or materials may cause noises and vibrations.
NOTE
Using low power levels (1-5) may cause clicking noises.
Initial cleaning
Wipe the ceramic glass surface with a damp cloth and ceramic hob glass cleaner.
WARNING
Do not use caustic or abrasive cleaners. The surface could be damaged.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 18 2/19/2018 1:13:46 PM
English 19
Operation
Operation
Switching the appliance on
The appliance is switched on using the
button.
Touch the button for approximately 1-2
seconds.
The digital displays will show .
NOTE
After the
button has been actuated to switch on your appliance, a power level
must be selected within approximately 20 seconds. Otherwise, the appliance will
switch itself off for safety reasons.
Selecting cooking zone and power level
1. For selecting the cooking zone, touch
the corresponding cooking zone button.
2. For setting and adjusting the power
level, use the Power level buttons.
NOTE
The default level is set to 15 when selecting the cooking zone.
If more than one button is touched for longer than 8 seconds,
will show in
the cooking zone display.
Suggested settings for cooking specic foods
The numbers in the table below are guidelines. The power level required for
various cooking methods depend on a number of variables, including the quality
of the cookware being used and the type and amount of food being cooked.
Power level Cooking method Examples for Use
14-15
Warming /
Sautéing / Frying
Warming large amounts of liquid, boiling
noodles, searing meat, browning goulash,
braising meat
8-11 Intensive frying
Steak, sirloin, hash browns, sausages,
pancakes / griddle cakes
7-10 Frying
Schnitzel / chops, liver, sh, rissoles, fried
eggs
5-7 Boiling
Cooking up to 1.5 l liquid, potatoes,
vegetables
2-4
Steaming /
Stewing / Boiling
Steaming and stewing of small amounts of
vegetables, boiling rice and milk dishes
1-2 Melting
Melting butter, dissolving gelatine, melting
chocolate
NOTE
You will need to adjust the power level according to specic cookware and foods.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 19 2/19/2018 1:13:47 PM
20 English
Operation
Operation
Flex zone Plus
Cooking Zone 4
Cooking Zone 3
Cooking Zone 2
Cooking Zone 1
The Flex zone is the large cooking area
located on the left side of the hob (see the
gure left) that is specially designed to
accommodate multiple pots and pans of
varying shapes and sizes at once. The Flex
zone has four zones that are operated by
individual inductors, allowing you to cook
regardless of where cookware is placed on a
cooking zone.
With Flex zone Plus, you can use a combination of different cooking zones to
enlarge the cooking area. See the table below for the corresponding button to
touch to activate the different combinations.
Cooking Zone 1 burner 2 burner 3 burner 4 burner
1
2
3
4
NOTE
When using only one cooking zone, the diameter of the bottom of the
cookware must be less than 14 cm.
The hob may take 5-10 seconds to recognise the position of cookware.
Noises may occur while the hob recognise the cookware.
Do not remove cookware during cooking. For safety purposes, the hob
automatically stops if cookware has been removed for more than 5 seconds.
Power Boost
The Power Boost function makes additional power available to the each cooking
zones. (example : bring a large volume of water to the boil)
Cooking zones Max Boost time
145 mm 10 min
210 mm 10 min
Front or Rear Flex Plus 10 min
Complete Flex Plus 5 min
After these times, the cooking zones automatically return to power level
.
NOTE
In certain circumstances, the Power Boost function may be deactivated
automatically to protect the internal electronic components of the hob.
For example, It is impossible to output max power on Flex zone rear and Flex zone
front at the same time.
Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost function, Power
Management automatically reduces the power level of cooking zone.
1
2
3
4
No.1 and No.2 is paired
No3. and No.4 is paired
The display for this cooking zone alternates
for some seconds between the set power
level and the maximum possible power
level. After then, the display changes from
the set power level to maximum possible
power level.
NZ6000K NZ64N7757GK_NZ64N7757FK_DG68-01067A-00_EN+FI+NO+DA+SV.indb 20 2/19/2018 1:13:48 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160

Samsung NZ64N7757FK/E1 Kasutusjuhend

Kategooria
Pliidiplaadid
Tüüp
Kasutusjuhend
See juhend sobib ka