FXA PD 2500I Kasutusjuhend

Kategooria
Elektrigeneraatorid
Tüüp
Kasutusjuhend
Inverter generator 502313382
Instruction manual (Original instructions) GB pg 7-21
Käyttöohje (Alkuperäisten ohjeiden käännös) FI pg 22-36
Bruksanvisning (Översättning av originalinstruktionerna) SE pg 37-51
Bruksanvisning (Oversettelse av de opprinnelige instruksjonene) NO pg 52-66
Kasutusjuhend (Tõlgitud originaal juhendist) EE pg 67-81
Instrukcija (Tulkojums no oriģinālvalodas) LV pg 82-96
Naudojimo instrukcijos (Vertimas originali instrukcija) LT pg 97-111
(1)
1
13
7
5
2
89
4
3
6
12
11
10
14
2
(1A)
15
20
16
17
18
19
3
4
(2)
Fuel Filter Tank Cap
(4)
(3)
(5)
(6)
1
2
3
4
5
6
8
7
9
10
5
(11)
(13)
(8)
(10)
(12)
(14)
(7)
(9)
6
(21)
(16)(15)
(17)
(19)
(20)
(18)
7
INTRODUCTION
Thank you for purchasing this product which has
passed through our extensive quality assurance
process. Every care has been taken to ensure that it
reaches you in perfect condition.
SAFETY FIRST
Before attempting to operate this power tool the
following basic safety precautions should always be
taken to reduce the risk of fire, electric shock and
personal injury. It is important to read the instruction
manual to understand the application, limitations and
potential hazards associated with this tool.
CERTIFICATE OF GUARANTEE
This product is guaranteed for a period of 2 Years,
with effect from the date of purchase and applies only
to the original purchaser. This guarantee only applies
to defects arising from, defective materials and or
faulty workmanship that become evident during the
guarantee period only and does not include
consumable items. The manufacturer will repair or
replace the product at their discretion subject to the
following. That the product has been used in
accordance with the guide lines as detailed in the
product manual and that it has not been
subjected to misuse, abuse or used for a purpose for
which it was not intended. That it has not been taken
apart or tampered with in any way whatsoever or has
been serviced by unauthorised persons or has been
used for hire purposes. Transit damage is excluded
from this guarantee, for such damage the transport
company is responsible. Claims made under this
guarantee must be made in the first instance, directly
to the retailer within the guarantee period. Only under
exceptional circumstances should the product be
returned to the manufacturer. In these case it shall be
the consumer’s responsibility to return the product at
their cost ensuring that the product is adequately
packed to prevent transit damage and must be
accompanied with a brief description of the fault and
a copy of the receipt or other proof of purchase. The
manufacturer shall not be liable for any special,
exemplary, direct, indirect, incidental, or consequential
loss or damage under this guarantee. This guarantee
is in addition to and does not affect any rights, which
the consumer may have by virtue of the Sale of Goods
Act 1973 as amended 1975 and 1999.
The power tool is intended for domestic use only.
The power tool is not suitable and is not intended
for commercial or professional use.
The warranty does not cover defects and damage
to power tools resulting from use for purposes
other than domestic use, in particular as a result of
pushing through and abuse.
”Warranty is voided in case the tool is damaged due
to one of the conditions below:
1. Misuse of product or negligence of proper
maintenance of product,
2. Commercial, professional or rental use of product,
3. Repair done by an unauthorized service company.
4. Damages caused by external objects or
substances.”
STATUTORY RIGHTS
This guarantee is in addition to and in no way affects
your statutory rights.
PRODUCT DISPOSAL
When this product reaches the end of it’s life or is
disposed of for any other reason, it must not be
disposed of in household waste. In order to preserve
natural resources, and to minimise adverse
environmental impact, please recycle or dispose of
this product in an environmentally friendly way. It
should be taken to your local waste recycling centre
or other authorised collection and disposal facility.
If in doubt consult your local waste authority for
information regarding available recycling and / or
disposal options.
IMPORTANT SAFETY INFORMATION
Your safety and the safety of others are very
important.
We have provided many important safety messages in
this manual and on your appliance. Always read and
obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential
hazards that can kill or hurt you and
others.
All safety messages will follow the
safety alert symbol and either the
word “DANGER” or “WARNING.”
These words mean:
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates
a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices not related to
personal injury.
CAUTION, without the safety alert symbol, is used to
address practices not related to personal injury.
All safety messages will tell you what the potential
hazard is, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are
not followed.
DANGER
WARNING
CAUTION
NOTICE
CAUTION
8
DANGER: CARBON MONOXIDE.
Using a generator indoors CAN KILL YOU IN
MINUTES.
Generator exhaust contains high levels of carbon
monoxide (CO), a poisonous gas you cannot see or
smell. If you can smell the generator exhaust, you are
breathing CO. But even if you cannot smell the
exhaust, you could be breathing CO.
Never use a generator inside homes, garages,
crawlspaces, or other partly enclosed areas. Deadly
levels of carbon monoxide can build up in these
areas. Using a fan or opening windows and doors
does NOT supply enough fresh air.
ONLY use a generator outdoors and far away from
open windows, doors, and vents. These openings can
pull in generator exhaust.
Even when you use a generator correctly, CO may
leak into the home. ALWAYS use a battery
powered or battery-backup CO alarm in the home.
If you start to feel sick, dizzy, or weak after the
generator has been running, move to fresh air RIGHT
AWAY. See a doctor. You could have
carbon monoxide poisoning.
FUEL FILLING INSTRUCTIONS
Select bare ground for fuelling and move at least 10
feet (3m) from fuelling spot before starting the engine.
After refuelling, properly tighten fuel cap; wipe off any
spilled fuel and check for leakage.
Warning! If fuel gets spilled on clothes, especially
trousers, it is very important to change clothes
immediately. Do not rely on evaporation.
Flammable quantities of fuel may remain on clothes
after a spill for longer than expected.
Warning! Vibrations can cause an improperly
tightened fuel cap to loosen or come off and spill
quantities of fuel. In order to reduce the risk of fuel
spillage and fire, tighten fuel filler cap by hand as
securely as possible.
Before use always make sure that the fuel cap has
been properly tightened. Check for fuel leakage while
refuelling and during operation. If a fuel leak is
suspected, do not start or run the engine until leak is
fixed and spilled fuel has been wiped away.
Warning! The ignition system of your unit produces
an electromagnetic field of a very low intensity. This
field may interfere with some pacemakers. To reduce
the risk of serious or fatal injury, people with a
pacemaker fitted should consult their physician and
the pacemaker manufacturer before operating this
tool.
READ THE INSTRUCTIONS
Consult the Owner’s Manual for
generator safety precautions. Do not
install, operate or repair this equipment
without reading this manual and the
safety precautions throughout.
Use only genuine replacement parts
SAVE THESE INSTRUCTIONS
The generator must be mounted on a firm level
surface.
Do not allow children or untrained individuals to use
this unit.
Keep all bystanders, children, and pets at least 10 feet
away.
Wear sturdy and dry shoes or boots. Do not
operate while barefoot.
Do not operate generator when you are tired or under
the influence of drugs, alcohol, or medication.
The electrical output load must not exceed the
maximum load stated on the rating plate. Exceeding
the rated load will damage the unit or shorten its life
and will invalidate the guarantee.
The engine must not be run at speeds that exceed the
maximum stated on the rating plate.
Operating an engine at excessive speeds increases
the hazard of personal injury.
Do not tamper with components, which may increase
or decrease the governed speed.
Mains extension leads, mains supply leads, and all
electrical equipment must be in good working
condition.
Never operate electrical equipment with damaged or
defective mains supply leads.
Keep the area around the generator clear of
obstructions at all times. Never locate the generator
against a building or near a canvas or plastic structure
i.e.Tents etc.
Always use the correct fuel mix as stated in the user
manual and on the rating plate.
To reduce the risk of fire and burn injury, handle fuel
with care. It is highly flammable.
DANGER
Do not use E15 or E85 fuel in this product.
It will damage the unit and void your warranty.
Only use unleaded gasoline containing up to
10% ethanol.
WARNING
9
Do not smoke while handling fuel.
Store fuel in a container approved for gasoline.
To prevent fire, always stop the engine and allow to
cool for five minutes before refueling and never over fill
the fuel tank.
Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.
Tighten the fuel cap securely after refueling.
Wipe spilled fuel from the unit.
Never attempt to burn off spilled fuel under any
circumstances.
Always clean up spilt fuel immediately using sand.
Do not use the generator in or near an explosive
atmosphere.
To prevent an electric shock, never operate the
machine in rain, snow or touch with wet hands.
Check the fuel system periodically for leaks. Seals and
hoses should be checked for signs of deterioration or
chafing. Check for loose or missing clamps damaged
fuel tank or filler cap. All defects should be corrected
before further use.
Always allow the generator to reach full operating
speed before connecting any electrical load.
Always disconnect the electrical load before switching
the generator off.
To prevent surging that may possibly damage
electrical equipment, do not allow engine to run out of
fuel while electrical loads are connected.
Before transporting the generator in a vehicle, drain all
fuel to prevent spillage.
To prevent an electric shock and fire, never
connect an electrical load with the electrical output
switched on.
Do not connect the generator to any other electrical
source.
Before storing, allow the engine to cool for 30 minutes
and drain fuel from the unit.
Do not store the generator in rain, snow, or wet
weather.
Store the generator in a well-ventilated area with the
fuel tank empty. Fuel should not be stored near the
generator.
Empty fuel tank, place the engine switch/fuel
valve/choke lever in the OFF position, and restrain the
unit from moving before transporting in a vehicle.
Provide a plastic sheet or absorbent pad below the
generator to catch any drips of fuel or lubricant when
transporting.
Generators vibrate in normal use. During and after the
use of the generator, inspect the generator as well as
extension cords and power supply cords connected to
it for damage resulting from vibration. Have damaged
items repaired or replaced as necessary. Do not use
plugs or cords that show signs of damage such as
broken or cracked insulation or damaged blades.
IMPORTANT SAFETY INSTRUCTIONS
For power outages, permanently installed stationary
generators are better suited for providing back-up
power to the home. Even a properly connected
portable generator can become overloaded. This may
result in overheating or stressing the generator
components, possibly leading to generator failure.
Inspect the unit before each use for loose
fasteners, fuel leaks, etc. Replace damaged parts.
Use only recommended or equivalent replacement
parts and accessories. Use of any other parts or failure
to follow maintenance instructions may create a risk of
shock or injury.
FUEL FILLING INSTRUCTIONS
DANGER: RISK OF FIRE AND SERIOUS BURNS.
Never remove fuel cap when unit is running. Shut off
engine and allow the unit to cool at least five minutes.
Remove cap slowly.
Select bare ground for fuelling and move at least 10
feet (3m) from fuelling spot before starting the engine.
After refuelling, properly tighten fuel cap; wipe off any
spilled fuel and check for leakage.
WARNING! If fuel gets spilled on clothes, especially
trousers, it is very important to change clothes
immediately. Do not rely on evaporation.
Flammable quantities of fuel may remain on clothes
after a spill for longer than expected.
WARNING! Vibrations can cause an improperly
tightened fuel cap to loosen or come off and spill
quantities of fuel. In order to reduce the risk of fuel
spillage and fire, tighten fuel filler cap by hand as
securely as possible.
Before use always make sure that the fuel cap has
been properly tightened. Check for fuel leakage while
refuelling and during operation. If a fuel leak is
suspected, do not start or run the engine until leak is
fixed and spilled fuel has been wiped away.
WARNING! The ignition system of your unit produces
an electromagnetic field of a very low intensity. This
field may interfere with some pacemakers. To reduce
the risk of serious or fatal injury, people with a
pacemaker fitted should consult their physician and the
pacemaker manufacturer before operating this tool.
WARNING
10
ADDING OR REMOVING FUEL
Turn the generator off and let it cool for at least five
minutes before removing the fuel cap. Loosen the cap
slowly to relieve pressure in the tank.
Only fill or drain fuel outdoors in a well-ventilated area.
DO NOT pump gasoline directly into the generator at
the gasoline station. Use an approved container to
transfer the fuel to the generator.
DO NOT overfill the fuel tank.
Always keep fuel away from sparks, open flames, pilot
lights, heat and other sources of ignition.
DO NOT light or smoke cigarettes.
WHEN STARTING THE GENERATOR
DO NOT attempt to start a damaged generator.
Make certain that the gas cap, air filter, spark plug, fuel
lines and exhaust system are properly in place.
Allow spilled fuel to evaporate fully before attempting to
start the engine.
Make certain that the generator is resting firmly on level
ground.
WHEN OPERATING THE GENERATOR
DO NOT move or tip the generator during operation.
DO NOT tip the generator or allow fuel or oil to spill.
WHEN TRANSPORTING OR SERVICING THE
GENERATOR
Make certain that the fuel shutoff valve is in the off
position and the fuel tank is empty.
Disconnect the spark plug wire.
When storing the generator:
Store away from sparks, open flames, pilot lights, heat
and other sources of ignition.
SPECIFIC SAFETY INSTRUCTIONS
When this generator is used to supply a building wiring
system: the generator must be installed by a qualified
electrician and connected to a transfer switch as a
separately derived system in accordance with South
African Wiring Rules. The generator shall be connected
through a transfer switch that switches all conductors
other than the equipment grounding conductor. Failure
to isolate the generator from power utility can result in
death or injury to electric utility workers.
Exhaust fumes contains poisonous carbon monoxide, a
colourless, odourless gas. Breathing exhaust fumes can
cause loss of consciousness and can lead to death. If
running in a confined or partially enclosed area, the air
may contain a dangerous amount of carbon monoxide.
To keep exhaust fumes from building up, always
provide adequate ventilation.
Always use a battery-powered carbon monoxide
detector when running the generator. If you begin to
feel sick, dizzy, or weak while using the generator, shut
it off and get to fresh air immediately. See a doctor.
You may have carbon monoxide poisoning.
Place the generator on a flat, stable surface with a
slope of no more than 4°.
Operate in a well-ventilated, well-lit area isolated from
working areas to avoid noise interference.
Operating the generator in wet conditions could result
in electrocution. Keep the unit dry.
Keep the generator a minimum of 1m away from all
types of combustible material.
Do not operate the generator near hazardous
material.
Do not operate the generator at a petrol station.
Do not touch the muffler or cylinder during or
immediately after use; they are HOT and will cause
burn injury.
Do not connect to a building’s electrical system
unless a transfer switch has been properly installed by
a qualified electrician.
Do not allow the generator’s fuel tank to overflow when
filling. Fill to 25mm below the top neck of the unleaded
fuel tank to allow for fuel expansion.
Check the ventilation hole inside the fuel tank cap for
debris. Do not block the vent.
Do not smoke when filling the generator with
unleaded fuel.
Allow the engine to remain in a shut-down
condition for at least five minutes before adding
unleaded fuel or oil.
Do not remove the oil dipstick or the fuel tank cap
when the engine is running.
Pay close attention to all safety labels located on the
generator.
Keep children a minimum of 3m away from the
generator at all times.
The unit operates best in temperatures between 5°C
and 40°C with a relative humidity of 30~95%.
Operation of the generator at altitudes above 1,000m
may require retuning. Consult a qualified service
technician.
When using extension lines or mobile distribution
networks the total length of lines for a cross section of
1.5mm2should not exceed 60m; for a cross section of
2.5mm2this should not exceed 100m.
The generating set must not be connected to other
power sources.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan someone this tool, loan them these
instructions also.
11
Rotating parts can entangle hands, feet, hair, clothing
and/or accessories. Keep hands and feet away from
rotating parts. Tie up long hair and remove jewellery.
Operate equipment with guards in place. DO NOT
wear loose-fitting clothing, dangling drawstrings or
items that could become caught.
Sparks can result in fire or electrical shock.
When servicing the generator: Disconnect the spark
plug wire and place it where it cannot contact the
plug. DO NOT check for spark with the plug removed.
Use only approved spark plug testers.
GENERAL SAFETY RULES
Read all instructions Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury. The term "power tool" in all of the
warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless)
power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
Amoment of inattention while operating power
tools may result in serious personal injury.
b) Use safety equipment. Always wear eye
protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
c) Avoid accidental starting. Ensure the switch is in
the off position before plugging in. Carrying power
tools with your finger on the switch or plugging in
power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the
hands of untrained users.
WARNING
12
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could
result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
COMPONENTS & CONTROLS (FIG.1 & 1A)
UNPACKING
This packaging contains sharp objects. Take care
when unpacking. Remove the machine, together with
the accessories supplied, from the packaging. Check
carefully to ensure that the machine is in good
condition and account for all the accessories listed in
this manual. Also make sure that all the accessories
are complete. If any parts are found to be missing, the
machine and its accessories should be returned
together in their original packaging to the retailer. Do
not throw the packaging away, keep it safe
throughout the guarantee period, then recycle if
possible, otherwise dispose of it by the proper means.
Do not let children play with empty plastic bags due
to the risk of suffocation.
PRE-OPERATION CHECK
CHECKING THE ENGINE OIL
WARNING. Running the generator with insufficient
engine oil can cause serious engine damage.
Engine oil should be replaced during regular
maintenance or when the oil level is below the end of
the dipstick.
WARNING. Before checking or replacing oil, make
sure the engine is fully stopped and the generator is
situated on a stable and level surface.
ADDING ENGINE OIL
Engine oil has a major influence on engine
performance and service life. For general, all
temperature use, SAE 15W-40 is recommended.
Always use a 4-stroke motor oil. Non-detergent or 2-
stroke engine oils will damage the engine and should
not be used.
1. Place the generator on an even surface with
the spark plug side facing up and unscrew the
oil filler cap/dipstick (Fig.2).
2. Wipe dipstick clean and re-seat in hole; do not
re-thread. Remove dipstick again and check
the oil level. The oil level should fall within the
level indicator area on the dipstick. If level is
low, add engine oil until the fluid level rises to
the upper portion of the level indicator area on
the dipstick (Fig.2). Replace and secure the oil
cap/dipstick and return the generator to the
stand position.
CHECKING/ADDING FUEL
1. Remove the fuel cap (Fig.3).
2. Remove and clean the fuel filter (Fig.4).
3. Fill with unleaded petrol. The fuel tank should
not be filled above the top of the fuel filter
(Fig.5). Replace and secure the fuel cap. Never
use old, stale, or contaminated unleaded fuel, and
do not use an oil/fuel mixture. Do not allow dirt or
water into the fuel tank.
1. Fuel cap
2. Fuel tank
3. Oil alert indicator (yellow)
4. Engine overload indicator (red)
5. Power indicator (green)
6. 5V USB outlet x 2
7. AC socket (230v)
8. AC socket (230v)
9. Ground (earth) terminal
10. 12V DC outlet (-)
11. 12V DC outlet (+)
12. DC overload reset
13. Engine On/Off switch
14. Display meter
15. Frame
16. Fuel valve
17. Air filter connection screw
18. Air filter cover
19. Recoil starter grip
20. Choke lever
CAUTION
13
UNDERSTANDING THE CONTROL PANEL (FIG.6)
1. The display meter shows the power output of the
generator.
2. Engine switch. When the engine switch is in the
STOP position the engine will not run.
3. DC circuit breaker. The circuit breaker is provided
to protect the generator against electrical
overload.
4. DC socket. Your generator has a 12V, 8.3A
DC socket for charging lead acid batteries.
5. Ground (earth) terminal.
(See location & grounding)
6. The Oil alert system is designed to prevent engine
damage caused by an insufficient amount of oil in
the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the Oil Alert
indicator light comes on and the Oil Alert system
automatically will stop the engine (the engine
switch will remain in the ON position). If the
engine stops or the Oil Alert indicator light comes
on when you pull the starter grip, check the
engine oil level.
7. AC power indicator light (green). It indicates that
the generator is producing electrical power at the
sockets.
8. If the generator is overloaded (in excess of
2600W), or if there is a short circuit in a
connected appliance, the engine overload
indicator light (red) will go ON. The engine
overload indicator light (red) will stay ON, and
after several seconds, current to the connected
appliance(s) will shut off, and the power indicator
light (green) will go OFF.
9. 2 x 5V USB sockets. Power your smartphone,
tablet, laptop etc.
10. AC sockets which supply rated output.
LOCATION AND GROUNDING
Before using this generator it must be prepared
correctly before use. Locate the generator on firm
level ground away from buildings or other structures
ensuring that the exhaust is not obstructed.
Your generator must be properly connected to an
appropriate ground to help prevent electric shock.
WARNING. Failure to properly ground the generator
can result in electric shock.
A ground terminal connected to the frame of the
generator has been provided on the power panel. For
remote grounding, connect of a length of heavy gauge
(12 AWG minimum) copper wire between the generator
ground terminal and a copper rod driven into the
ground. We strongly recommend that you consult with
a qualified electrician to ensure compliance with local
electrical codes.
OPERATION
STARTING THE GENERATOR
Always check the oil level before starting the engine.
Before starting the engine make sure that all the
electrical loads are disconnected from the generator
AC outlet socket.
1. Turn the fuel valve to the ON position (Fig.7)
2. Turn the engine switch to the ON (I) position
(Fig.8).
3. Set the choke lever to the CLOSED position
(Fig.9).
4. Hold down the generator firmly with one hand
on the frame. With the other hand grip the
recoil starter cord handle (Fig.10) and pull and
return the rope gently 3-4 times to let the
engine breath in the fuel mixture from the
carburetor. Pull the cord sharply. Continue this
procedure until the engine starts.
CAUTION. Avoid damaging the plastic case of the
crankshaft while pulling the rope. Always return the
recoil starter cord handle slowly.
5. When the engine has been successfully started
and is running smoothly set the choke lever to
the OPEN position (Fig.11).
WARNING. Before connecting any electrical load to
the generator ensure that the load does not exceed
the maximum load as stated on the rating plate.
Ensure that the mains supply lead is long enough to
reach the generator without any strain.
When the generator engine has been successfully
started and is running smoothly connect the
electrical load to the generators AC output socket.
Warning! DC power and AC power can be used at the
same time but DO NOT exceed the maximum power
output, as shown on the rating plate.
STOPPING THE GENERATOR
In case of emergency, the easiest way to stop the
generator is to directly put engine switch to OFF
position. Avoid doing so in non-emergency
circumstances as it carries the risk of damaging the
generator.
1. Before stopping the engine make sure that all
the electrical loads are disconnected from the
generator AC outlet socket.
2. Switch off the engine by putting the engine
switch in the OFF position (Fig.12).
CAUTION
WARNING
14
3. When the generator engine has stopped and
before storage, turn the fuel valve lever to the
OFF position (Fig.13).
NOTE. After disconnecting all loads, leave the
generator running for another 1-2 minutes before
shutting it down. Then switch off the engine switch
and the fuel valve. Switching off the engine with loads
attached may damage the unit and cause difficulty
starting the generator next time it is used.
DC BATTERY CHARGING FUNCTION
This function is applicable to 12V battery charging
only.
Disconnect the leads from the battery.
Loosen the vents on the battery.
Make sure the battery fluid level is correct
Using a hydrometer measure the specific gravity of
the battery fluid and calculate the charging time in
accordance with the table shown.
Attach the 12v charging leads to the battery observing
correct polarity (Red = + Positive) (black = - Negative).
Connect the 12v charger lead to the connection points
on the generator, Fig 14, and secure in place by
turning the screws. Make sure the positive and
negative leads are connected correctly observing
correct polarity.
The specific gravity for the fully charged battery shall
be within 1.26 to 1.28. It is advisable to check the
specific gravity every hour.
The DC circuit breaker turns off automatically if the
current exceeds the rated flow during battery
charging. To restart the battery charging process
press the circuit breaker button to ON, Fig.15.
OVERLOAD PROTECTION (FIG 16)
Under normal working conditions the (Green) output
indicator light will be illuminated.
If the generator is overloaded or if there is a
malfunction or a short circuit in a connected
appliance, the (Green) output indicator will extinguish
and the (Red) overload indicator light illuminates and
the power to the connected appliance will be
disconnected.
If the (Red) overload indicator light illuminates stop the
generator and investigate the cause.
Before connecting an appliance to the generator,
check that it is in good order, and that its electrical
rating does not exceed that of the generator. Then
connect the power cord of the appliance, and start
the engine.
When an electric motor is started, both the (Red)
overload indicator and the (Green) output indicator will
illuminate simultaneously. This is normal, the (Red)
over- load indicator extinguishes after about four (4)
seconds. If the (Red) overload indicator remains
illuminated, consult your generator dealer.
Caution: Substantial overloading that continuously
illuminates the (Red) overload indicator may damage
the generator. If the (Red) overload indicator light and
the (Green) output indicator illuminate at the same
time when engine starts and the (Red) overload
indicator remains illuminated after the (Green) output
indicator extinguishes, please contact your supplier.
Note: For equipment with an inductive load (more
power will be required at initial start). Under these
conditions it is normal for both the (Red) overload
indicator and the (Green) output indicator will
illuminate simultaneously for a short period about four
(4) seconds. After the appliance starts, the (Red) over-
load indicator extinguishes and the (Green) output
indicator will remain illuminated.
MAINTENANCE
GENERAL MAINTENANCE
Keep the generator in a clean and dry environment
where it is not exposed to dust, dirt, moisture, or
corrosive vapours.
Do not allow the cooling air slots in the generator to
become clogged with foreign material such as leaves,
snow, etc.
15
Do not use a garden hose to clean the generator.
Water entering the fuel system or other internal parts
of the unit can cause problems that will decrease the
life of the generator.
To clean the unit:
1. Use a soft bristle brush and/or vacuum cleaner
to loosen and remove dirt and debris.
2. Clean air vents with low pressure air that does
not exceed 25 psi.
3. Wipe the exterior surfaces of the generator with
adamp cloth.
ENGINE OIL REPLACEMENT
Initial oil change: After the first 20 hours of operation.
Thereafter: Every 50 hours of operation.
1. Remove the oil filler cap/dipstick.
2. Place a container underneath the oil drainage
plug to collect used oil as it drains.
3. Unscrew the oil drainage plug and remove.
4. Allow oil to drain completely.
5. Reinstall the oil drainage plug and tighten
securely.
6. Refill with oil following the instructions in the
Checking/Adding Oil section.
7. Reinstall the oil filler cap/dipstick.
Used oil should be disposed of at an approved
disposal site. See your local oil retailer for more
information.
CHECKING/CLEANING THE AIR FILTER
For proper performance and long life, keep air
filters clean.
1. Unscrew the air filter connection screw located
at the bottom of the air filter cover. Remove the
cover and set aside (Fig.17).
2. Remove the filter elements (Fig.18).
3. If the filter elements are dirty, clean with warm,
soapy water. Rinse and let dry.
4. Apply a light coat of engine oil to the elements,
then squeeze it out.
5. Replace the elements in the air filter unit.
6. Replace the air filter cover and tighten the air
filter connection screw.
NOTE: Do not run the generator without the air
filter. Rapid engine wear will result.
SPARK PLUG MAINTENANCE
The spark plug must be properly gapped and free of
deposits in order to ensure proper engine
operation. To check:
1. Remove the spark plug cap (Fig.19 & 20).
2. Clean any dirt from around base of spark plug.
3. Remove spark plug using wrench provided.
4. Inspect spark plug for damage, and clean with
awire brush before reinstalling. If insulator is
cracked or chipped, spark plug should be
replaced. Make sure electrode gap is 0.60mm-
0.80mm.
NOTE: If replacing, use the following
recommended spark plug: F6TC.
5. Screw spark plug back by hand, avoid
damaging threads of the cylinder.
6. Put the spark plug back in position and use the
spark plug wrench to tighten it. If spark plug is
new, use 1/2 turn to compress washer
appropriate amount. If reusing old spark plug,
use 1/8 to 1/4 turn for proper washer
compression.
7. Replace spark plug cap.
CLEANING THE EXHAUST PORT & MUFFLER
Depending on the type of fuel used, the type and
amount of oil used, and/or your operating
conditions, the exhaust port and muffler may
become blocked with carbon deposits. If you notice a
power loss with your petrol-powered tool, you may
need to remove these deposits to restore
performance. We highly recommend that only
qualified service technicians perform this service.
CLEANING THE FUEL TANK FILTER
1. Remove fuel cap and filter (Fig.3).
2. Clean the filter, replace if broken.
3. Dry the filter and install back on the generator.
DRAINING THE FUEL TANK
1. Turn the engine switch OFF ( O ).
2. Close fuel valve.
3. Remove the fuel line from the barb by using
pliers to loosen the tubing clamp and sliding the
fuel line off.
4. Install one end of a drain line over the barb, and
place the other end in a fuel container large
enough to catch the fuel being drained from the
tank.
5. Open fuel valve.
6. When the fuel has drained from the tank, close the
fuel valve and reinstall fuel line on barb.
16
PLEASE NOTE:
If using for a caravan, motor home
or boat etc refer to the
manufacturers manual regarding
connection of a generator.
Do NOT connect into a house
ring main circuit.
If the generator is not to be used or is to be stored for
more than one month the following storage procedure
should be carried out. Drain all the fuel from the fuel
tank and the carburettor, ensure that all the fuel has
been removed. Remove the spark plug and pour
approximately one tablespoon full of clean engine oil
into the spark plug hole. With the ignition turned OFF
gently pull on the recoil starter cord several times. Re-
fit the spark plug and continue to pull the recoil starter
cord until the piston is on the compression stroke
(when resistance is felt) then stop puling.
Store the generator in a dry well ventilated place
under a cover to prevent any dust or debris from
accumulating on the generator.
DRAINING THE CARBURETOR
1. Turn off fuel valve, make sure fuel is drained
and the tank is empty. Residual gasoline left
over a long time will cause difficulty when next
starting the engine.
2. Position an approved fuel container under the
carburetor drain screw to catch fuel; loosen the
screw. (Fig.21). Allow fuel to drain completely
into container.
3. Retighten drain screw.
4. After draining the fuel tank and carburetor, start
the engine and allow it to run until the unit runs
out of fuel. Consult hazardous waste management
guidelines in your area for the proper way to
dispose of fuel.
GENERAL INSPECTION & STORAGE
Regularly check that all the fixing screws are tight.
They may vibrate loose over time.
STORAGE
If the generator is not to be used or is to be stored for
more than one month the following storage procedure
should be carried out. Drain all the fuel from the fuel
tank and the carburettor, ensure that all the fuel has
been removed. Remove the spark plug and pour
approximately one tablespoon full of clean engine oil
into the spark plug hole. With the ignition turned OFF
gently pull on the recoil starter cord several times. Re-
fit the spark plug and continue to pull the recoil starter
cord until the piston is on the compression stroke
(when resistance is felt) then stop pulling.
Store the generator in a dry well ventilated place
under a cover to prevent any dust or debris from
accumulating on the generator.
17
TROUBLESHOOTING
Engine won’t start
Low engine output
Engine runs
erratically
Insufficient
compression
Sufficient
compression
Loose spark plug
Loose cylinder
head bolt
Damaged gasket
Tighten plug
Tighten bolt
Replace gasket
FUEL SYSTEM PROBLEMS
No fuel supplied
to combustion
chamber
Insufficient pulling
speed for starting
rope
Foreign matter in
fuel tank
Clogged fuel line
No fuel in tank
Fuel tap not open
ELECTRIC SYSTEM PROBLEMS
Combustion
chamber
supplied with
fuel
Poor spark
Pull rope sharply
Clean tank
Clean fuel line with
dealers advice
Supply fuel
Open tap
Spark plug dirty
with carbon or
wet with fuel
Remove carbon
or dry spark plug
Damaged spark
plug
Replace spark plug
Faulty magneto
Consult dealer
Improper
adjustment of
carburetor
Good
spark
Insufficient
pulling speed for
starting rope
Pull rope sharply
Wrong grade
of fuel used
Check grade of fuel
Overloading
Check the working
conditions
CONDITION PROBABLE CAUSE CORRECTIVE
ACTION
Fill sump with
correct oil
No oil/ Low oil level
Overloading
18
TROUBLESHOOTING
Indicator light ON.
No AC output
Tripped circuit breaker Reset
CONDITION PROBABLE CAUSE CORRECTIVE
ACTION
Poor connection or faulty lead
Broken recepticle
Faulty circuit breaker
Check and repair
Check and repair
Generator problem
Indicator light OFF.
No AC output
Output power too
high or low Engine RPM set too
high or low
No load speed set
to 3000rpm
Loose component Locate and
tighten
Internal generator
problem
Consult dealer
ENVIRONMENTAL PROTECTION
Information for (private householders) for the environmentally responsible disposal of Waste Electrical and
Electronic Equipment (WEEE)
This symbol on products and or accompanying documents indicates that used and end of life
electrical and electronic equipment should not be disposed of in household waste. For the
proper disposal, treatment, recovery and recycling, please take these products to designated
collection points, where they will be accepted on a free of charge basis. Alternatively, in some
countries you may be able to return your products to your retailer upon the purchase of an
equivalent new product. Disposing of this product correctly will help to save valuable resources
and prevent any potential adverse effects on human health and the environment which could
otherwise arise from inappropriate waste disposal and handling. Please contact your local
authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect
disposal of this waste in accordance with national legislation.
FOR BUSINESS USERS IN THE EUROPEAN UNION.
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union.
This Symbol is only valid in the European Union.
If you wish to dispose of this product, please contact your local authorities or dealer and ask for the correct
method of disposal.
19
TROUBLESHOOTING
The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation
between the emission and exposure levels, this cannot be used reliably to determine whether or not the actual
level of exposure of the workroom, the other sources of noise etc. i.e. the number of machines and the adjacent
processes and the length of time for which an operator is exposed to the noise. Also the permissible exposure
level can vary from country. This information however, will enable the user of the machine to make a better
evaluation of the hazard and risk. The supplier recommends the use of ear protection at all time.
Item
Spark plug
Engine oil
Air filter
Fuel filter
Valve
clearance
Fuel line
Exhaust
system
Carburetor
Cooling
system
Starting
system
Decarbon-
isation
Fittings/
Fastenings
Remark
Check condition
Adjust gap and clean
Replace if required
Check oil level
Replace
Clean. Replace if required
Clean fuel cock filter
Replace if required
Check and adjust when
engine is cold
Check fuel hose for cracks or
damage. Replace if required
Check for leakage. Tighten or
replace gasket if required.
Check exhaust screen. Clean
and replace if required.
Check choke operation
Check fan damage
Check recoil starter operation
More frequently if necessary
Check all fittings and fixtures
and tighten if required
Pre-operation
check (daily)
Initial 1 month
or 20 hours
Every 3 month
or 50 hours
Every 6 month
or 100 hours
Every 12 month
or 300 hours
20
Item Unit Measurement
AC output voltage V 230
AC power frequency Hz 50
Rated AC output KW 2.2
Max Rated AC output KW 2.5
Phase Single
Power factor Cosφ1
Displacement cc 196
DC output V/A 12/8.3
Engine 4 stroke, OHV
Continuous operating time hrs 4.5 (100% load)
Fuel tank capacity 5L
Fuel type Unleaded petrol
Oil capacity L 0.6
Oil type SAE 10W-30
Ignition system T.C.I
Starting system Recoil starter
Spark plug type F6TC
Cooling-down methods Forced air cooled
Sound power level dB(A) 96
TECHNICAL SPECIFICATION
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116

FXA PD 2500I Kasutusjuhend

Kategooria
Elektrigeneraatorid
Tüüp
Kasutusjuhend