SWA-9000S
USER MANUAL
ENG - 2 ENG - 3
Safety Information
Thank you for purchasing this product (SWA-9000S).
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol indicates that
high voltage is present inside.
It is dangerous to make any
kind of contact with any
internal part of this product.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates
that important literature
concerning operation and
maintenance has been
included with this product.
Class II product : This symbol indicates that it does not require a safety connection to
electrical earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
• The slots and openings in the cabinet and
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it
from overheating, these slots and openings
must never be blocked or covered.
– Do not place this apparatus in a conned
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is
provided.
– Do not place this apparatus near or over
a radiator or heat register, or where it is
exposed to direct sunlight.
– Do not place vessels (vases etc.)
containing water on this apparatus.
A water spill can cause a re or electric
shock.
• Do not expose this apparatus to rain
or place it near water (near a bathtub,
washbowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool,
etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer
immediately.
• Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in re or electric shock.
ENG - 2 ENG - 3
Safety Information
Thank you for purchasing this product (SWA-9000S).
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol indicates that
high voltage is present inside.
It is dangerous to make any
kind of contact with any
internal part of this product.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates
that important literature
concerning operation and
maintenance has been
included with this product.
Class II product : This symbol indicates that it does not require a safety connection to
electrical earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
• Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from
the apparatus.
• To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
set due to lightning and power line surges.
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
• To avoid electric shock, never touch the inside
of this apparatus. Only a qualied technician
should open this apparatus.
• Make sure to plug the power cord in until it is
rmly seated. When unplugging the power
cord from a wall outlet, always pull on the
power cord’s plug. Never unplug by pulling on
the power cord. Do not touch the power cord
with wet hands.
• If this apparatus does not operate normally
- in particular, if there are any unusual
sounds or smells coming from it - unplug it
immediately and contact an authorized dealer
or service centre.
• Maintenance of Cabinet.
– Before connecting other components to
this product, be sure to turn them off.
• Be sure to pull the power plug out of the
outlet if the product is to remain unused or
if you are leaving the house for an extended
period of time (especially when children,
elderly, or disabled people will be left alone in
the house).
– Accumulated dust can cause an electric
shock, an electric leakage, or a re by
causing the power cord to generate sparks
and heat or the insulation to deteriorate.
• Contact an authorized service centre for
information if you intend to install your
product in a location with heavy dust, high or
low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may cause serious damage to
your product.
• Use only a properly grounded plug and wall
outlet.
– An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
• To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power plug
must be readily accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a
location safely out of the reach of children.
– Do not place vessels (vases etc.)
containing water on this apparatus.
A water spill can cause a re or electric
shock.
• Do not expose this apparatus to rain
or place it near water (near a bathtub,
washbowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool,
etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer
immediately.
• Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in re or electric shock.
ENG - 4 ENG - 5
• Do not install the product in an unstable
location such as a shaky self, a slanted oor,
or a location exposed to vibration.
• Do not drop or strike the product. If the
product is damaged, disconnect the power
cord and contact a service centre.
• To clean this apparatus, unplug the power
cord from the wall outlet, and then wipe
the product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can
damage the appearance of the product or
erase the printing on the product.
• Do not expose this apparatus to dripping
or splashing. Do not put objects lled with
liquids, such as vases, on the apparatus.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a re.
WARNING :
• TO PREVENT THE SPREAD OF
FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• To reduce the risk of re or electric shock, do
not expose this appliance to rain or moisture.
Precautions
1. Ensure that the AC or DC power supply
in your house complies with the power
requirements listed on the identication
sticker located on the back of your product.
Install your product horizontally, on a
suitable base (furniture), with enough space
around it for ventilation (7~10 cm).
Make sure the ventilation slots are not
covered. Do not place the unit on ampliers
or other equipment which may become hot.
This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC
plug from the wall outlet.
2. Do not expose the unit to direct sunlight
or other heat sources. This could lead
to overheating and cause the unit to
malfunction.
3. Unplug the Power cord from the AC wall
socket if the unit malfunctions. Your product
is not intended for industrial use. It is for
personal use only. Condensation may occur
if your product has been stored in cold
temperatures. If transporting the unit during
the winter, wait approximately 2 hours until
the unit has reached room temperature
before using it.
4. If the electricity supplied to your home is
rated at 240V AC, use a suitable plug adapter
to connect this unit to your electrical outlets.
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below. Keep these operating
instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not t into your outlet, consult an
electrician for replacement of the obsolete
outlet.
ENG - 4 ENG - 5
Precautions
1. Ensure that the AC or DC power supply
in your house complies with the power
requirements listed on the identication
sticker located on the back of your product.
Install your product horizontally, on a
suitable base (furniture), with enough space
around it for ventilation (7~10 cm).
Make sure the ventilation slots are not
covered. Do not place the unit on ampliers
or other equipment which may become hot.
This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC
plug from the wall outlet.
2. Do not expose the unit to direct sunlight
or other heat sources. This could lead
to overheating and cause the unit to
malfunction.
3. Unplug the Power cord from the AC wall
socket if the unit malfunctions. Your product
is not intended for industrial use. It is for
personal use only. Condensation may occur
if your product has been stored in cold
temperatures. If transporting the unit during
the winter, wait approximately 2 hours until
the unit has reached room temperature
before using it.
4. If the electricity supplied to your home is
rated at 240V AC, use a suitable plug adapter
to connect this unit to your electrical outlets.
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below. Keep these operating
instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not t into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where it exits the apparatus.
11. Only use attachments/accessories specied
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specied by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning
storms or when you intend to leave it unused
for long periods of time.
14. Refer all servicing to qualied service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
ENG - 6 ENG - 7
Accessories
STANDBY
LINK
WIRELESS
Surround
Speaker (2EA)
Speaker Cable
(2EA)
Power Cord Wireless Dongle
(WHM520V)
Wireless
Receiver
Module
Screw (2EA) Holder-Dongle
(Stand Type)
Holder-Dongle
(Wall mount Type
/ One Mount Type)
Toroidal Ferrite Core
• The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung
Soundbars, see page 12. Do not connect the dongle to any other devices, such as smartphones,
desk-top PCs, or notebook PCs.
Specications
Weight
Wireless Receiver Module 0.7 kg
Surround Speaker 0.6 kg
Dimensions (W x H x D)
Wireless Receiver Module 50.0 X 201.3 X 132.0 mm
Surround Speaker 87.5 X 147.0 X 87.5 mm
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10% ~ 75%
Frequency range 20Hz~20KHz
NOTES
–
Samsung Electronics Co., Ltd reserves the right to change the specications without notice.
– Weight and dimensions are approximate.
– For more information about the power supply and power consumption, refer to the label attached
to the product.
– Design and specications are subject to change without prior notice.
Open Source Licence Notice
• To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
Connecting the SWA-9000S to a Soundbar
1. Connect the Wireless Receiver Module to 2 Surround Speakers
Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver
Module.
• The speaker cables are colour coded.
SURROUND-LEFT
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
SURROUND-RIGHT
SURROUND-LEFT SURROUND-RIGHT
• When connecting the speaker cables to the Wireless Receiver Module, follow these steps:
1. Insert the grey plug into the grey jack on the Wireless Receiver.
2. Insert the blue plug into the blue jack on the Wireless Receiver.
• When connecting the speaker cables to the surround speakers, follow these steps:
1. Match the speaker cable connected to the grey jack to the speaker with the grey label.
2. Match the speaker cable connected to the blue jack to the speaker with the blue label.
3. Insert the red and black coloured ends of each speaker cable into the red and black jacks of
the appropriate speaker.
• The labels are on the backs of the speakers.
ENG - 6 ENG - 7
Accessories
STANDBY
LINK
WIRELESS
Surround
Speaker (2EA)
Speaker Cable
(2EA)
Power Cord Wireless Dongle
(WHM520V)
Wireless
Receiver
Module
Screw (2EA) Holder-Dongle
(Stand Type)
Holder-Dongle
(Wall mount Type
/ One Mount Type)
Toroidal Ferrite Core
• The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung
Soundbars, see page 12. Do not connect the dongle to any other devices, such as smartphones,
desk-top PCs, or notebook PCs.
Specications
Weight
Wireless Receiver Module 0.7 kg
Surround Speaker 0.6 kg
Dimensions (W x H x D)
Wireless Receiver Module 50.0 X 201.3 X 132.0 mm
Surround Speaker 87.5 X 147.0 X 87.5 mm
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10% ~ 75%
Frequency range 20Hz~20KHz
NOTES
–
Samsung Electronics Co., Ltd reserves the right to change the specications without notice.
– Weight and dimensions are approximate.
– For more information about the power supply and power consumption, refer to the label attached
to the product.
– Design and specications are subject to change without prior notice.
Open Source Licence Notice
• To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
Connecting the SWA-9000S to a Soundbar
1. Connect the Wireless Receiver Module to 2 Surround Speakers
Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver
Module.
• The speaker cables are colour coded.
SURROUND-LEFT
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
SURROUND-RIGHT
SURROUND-LEFT SURROUND-RIGHT
• When connecting the speaker cables to the Wireless Receiver Module, follow these steps:
1. Insert the grey plug into the grey jack on the Wireless Receiver.
2. Insert the blue plug into the blue jack on the Wireless Receiver.
• When connecting the speaker cables to the surround speakers, follow these steps:
1. Match the speaker cable connected to the grey jack to the speaker with the grey label.
2. Match the speaker cable connected to the blue jack to the speaker with the blue label.
3. Insert the red and black coloured ends of each speaker cable into the red and black jacks of
the appropriate speaker.
• The labels are on the backs of the speakers.
ENG - 8 ENG - 9
2. Check the standby status after plugging into an electrical outlet
Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless
Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the
Wireless Receiver Module blinks. If the LED does not blink, refer to step 8 on page 11.
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
POWER
STANDBY
LINK
STANDBY
LINK
Blue blinking
Attach the Toroidal Ferrite Core to the Power Cord of the Soundbar
(Applicable only when connecting the SWA-9000S and MS series Soundbars/home
cinemas.)
HDMI IN
HDMI OUT
(TV-ARC)
WIRELESS
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
Bottom of the Soundbar
Attach the Toroidal ferrite core to the power cord
of the Soundbar to help prevent RF interference
from radio signals.
1. Pull the xing tab of the Toroidal ferrite core to
open it.
2. Make two loops in the Soundbar’s power cord.
3. Attach the Toroidal ferrite core to the Soundbar’s
power cord as shown in the gure on the left, and
then close it by pressing it until it clicks.
• Ensure that the ferrite core is attached as
close as possible to the power plug of the
Soundbar.
3. Connect the main unit of the Soundbar to the Wirless Dongle
Connect the wireless dongle to the “WIRELESS” port on the Soundbar main unit.
• When inserting the Wireless Dongle into the holder, make sure that the “WIRELESS” logo is
facing up, as shown in the pictures below.
WIRELESS
WIRELESS
WIRELESS
1
2
Stand Type
WIRELESS
WIRELESS
WIRELESS
1
2
Wall Mount Type
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
One Mount Type (WMN300SB, not supplied)
Precautions for purchasing an additional SWA-W700 (optional Subwoofer)
Do not remove the wireless dongle from the main Soundbar unit.
The wireless dongle that comes with the product can be used with the SWA-W700 (optional
Subwoofer).
ENG - 8 ENG - 9
2. Check the standby status after plugging into an electrical outlet
Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless
Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the
Wireless Receiver Module blinks. If the LED does not blink, refer to step 8 on page 11.
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
POWER
STANDBY
LINK
STANDBY
LINK
Blue blinking
Attach the Toroidal Ferrite Core to the Power Cord of the Soundbar
(Applicable only when connecting the SWA-9000S and MS series Soundbars/home
cinemas.)
HDMI IN
HDMI OUT
(TV-ARC)
WIRELESS
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
Bottom of the Soundbar
Attach the Toroidal ferrite core to the power cord
of the Soundbar to help prevent RF interference
from radio signals.
1. Pull the xing tab of the Toroidal ferrite core to
open it.
2. Make two loops in the Soundbar’s power cord.
3. Attach the Toroidal ferrite core to the Soundbar’s
power cord as shown in the gure on the left, and
then close it by pressing it until it clicks.
• Ensure that the ferrite core is attached as
close as possible to the power plug of the
Soundbar.
3. Connect the main unit of the Soundbar to the Wirless Dongle
Connect the wireless dongle to the “WIRELESS” port on the Soundbar main unit.
• When inserting the Wireless Dongle into the holder, make sure that the “WIRELESS” logo is
facing up, as shown in the pictures below.
WIRELESS
WIRELESS
WIRELESS
1
2
Stand Type
WIRELESS
WIRELESS
WIRELESS
1
2
Wall Mount Type
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
One Mount Type (WMN300SB, not supplied)
Precautions for purchasing an additional SWA-W700 (optional Subwoofer)
Do not remove the wireless dongle from the main Soundbar unit.
The wireless dongle that comes with the product can be used with the SWA-W700 (optional
Subwoofer).
ENG - 10 ENG - 11
7. Check if the LINK LED is solid blue (connection complete)
STANDBY
LINK
STANDBY
LINK
Blue is On
The LINK LED indicator stops blinking
and glows a solid blue when a
connection is established between the
Soundbar and the Wireless Receiver
Module.
8. If the SWA-9000S does not connect, take the necessary steps
according to the LED Indicator’s status
LED status Action
LINK (Blue)
On
Connected with
the Soundbar
-
Blinking
Connection
standby status
Check if the Soundbar is turned on
Repeat steps 4 through 7.
STANDBY (Red) On Connection failure
Check if the Soundbar is turned on
1. Press the ID SET button on the back
of the Wireless Receiver Module with
a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
5 Sec
2. Repeat steps 4 through 7.
Others - Errors Contact a Samsung Service Centre.
4. Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button
on the main Soundbar unit.
BYE
• The image of the Soundbar may differ from your Soundbar, depending on the model.
5. Congure “ID SET” using the Soundbar’s remote control
Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears
on your Soundbar’s display.
VOL
SOUNDBAR
ID SET
5 Sec
• The image of the Soundbar may differ from your Soundbar, depending on the model.
6. Turn on the Soundbar
Turn on the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on
the main Soundbar unit.
ON
• The image of the Soundbar may differ from your Soundbar, depending on the model.
ENG - 10 ENG - 11
7. Check if the LINK LED is solid blue (connection complete)
STANDBY
LINK
STANDBY
LINK
Blue is On
The LINK LED indicator stops blinking
and glows a solid blue when a
connection is established between the
Soundbar and the Wireless Receiver
Module.
8. If the SWA-9000S does not connect, take the necessary steps
according to the LED Indicator’s status
LED status Action
LINK (Blue)
On
Connected with
the Soundbar
-
Blinking
Connection
standby status
Check if the Soundbar is turned on
Repeat steps 4 through 7.
STANDBY (Red) On Connection failure
Check if the Soundbar is turned on
1. Press the ID SET button on the back
of the Wireless Receiver Module with
a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
5 Sec
2. Repeat steps 4 through 7.
Others - Errors Contact a Samsung Service Centre.
4. Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button
on the main Soundbar unit.
BYE
• The image of the Soundbar may differ from your Soundbar, depending on the model.
5. Congure “ID SET” using the Soundbar’s remote control
Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears
on your Soundbar’s display.
VOL
SOUNDBAR
ID SET
5 Sec
• The image of the Soundbar may differ from your Soundbar, depending on the model.
6. Turn on the Soundbar
Turn on the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on
the main Soundbar unit.
ON
• The image of the Soundbar may differ from your Soundbar, depending on the model.
ENG - 12
CAUTIONS
• If you have connected your Soundbar and one or more Samsung Wireless Speakers via a wireless
router:
Disable the surround sound for the Soundbar and Samsung Wireless Speaker, and then install and
use the SWA-9000S.
• If you connect the SWA-9000S and do not disable surround sound as described above:
Sound will be played via both the Samsung Wireless Speakers and the SWA-9000S’s surround
speakers.
Compatible Models
HW-MS550 HW-MS560 HW-MS650 HW-MS651 HW-MS6500
HW-MS6501 HW-MS660 HW-MS661 HW-MS6510 HW-MS6511
HW-MS750 HW-MS751 HW-MS760 HW-MS761
• The model list is subject to change without further notice.
VIE - 2 VIE - 3
Thông tin v An ton
Cảm ơn bạn đã mua sản phẩm ny (SWA-9000S).
CHÚ Ý
NGUY CƠ BỊ ĐIỆN GIẬT
KHÔNG MỞ
CHÚ Y
–
–
–
VIE - 2 VIE - 3
Thông tin v An ton
Cảm ơn bạn đã mua sản phẩm ny (SWA-9000S).
CHÚ Ý
NGUY CƠ BỊ ĐIỆN GIẬT
KHÔNG MỞ
CHÚ Y
–
–
–
–
VIE - 5
CNH BO :
Thận trọng
1.
2.
3.
4.
Hướng dẫn quan trọng v an
ton
1.
2.
3.
4.
5.
6.
7.
8.
9.
VIE - 5
Thận trọng
1.
2.
3.
4.
Hướng dẫn quan trọng v an
ton
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
VIE - 6
Phụ kiện
STANDBY
LINK
WIRELESS
Loa Vòm
(2 chiếc)
Cáp Loa
(2 chiếc)
Dây Nguồn Khóa an ton
Không dây
(WHM520V)
Mô-đun Bộ
thu Không
dây
Vít (2 chiếc) Chi tiết giữ -
Khóa an ton
(Loại Giá)
Chi tiết giữ -
Khóa an ton
(Loại Treo Tường/
Loại Gắn Đơn)
Lõi Từ Hình xuyến
Thông số kỹ thuật
GHI CHÚ
–
–
–
–
Thông báo Giy php Nguồn m
Kết nối SWA-9000S với Soundbar
1. Kết nối Mô-đun Bộ thu Không dây với 2 Loa Vòm
SURROUND-LEFT
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
SURROUND-RIGHT
SURROUND-LEFT SURROUND-RIGHT
Khi cắm dây cáp loa vo Mô-đun Bộ thu Không dây, hãy lm như sau:
1.
2.
Khi cắm dây cáp loa vo loa vòm, hãy lm như sau:
1.
2.
3.
VIE - 6
Phụ kiện
STANDBY
LINK
WIRELESS
Loa Vòm
(2 chiếc)
Cáp Loa
(2 chiếc)
Dây Nguồn Khóa an ton
Không dây
(WHM520V)
Mô-đun Bộ
thu Không
dây
Vít (2 chiếc) Chi tiết giữ -
Khóa an ton
(Loại Giá)
Chi tiết giữ -
Khóa an ton
(Loại Treo Tường/
Loại Gắn Đơn)
Lõi Từ Hình xuyến
Thông số kỹ thuật
GHI CHÚ
–
–
–
–
Thông báo Giy php Nguồn m
Kết nối SWA-9000S với Soundbar
1. Kết nối Mô-đun Bộ thu Không dây với 2 Loa Vòm
SURROUND-LEFT
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
SURROUND-RIGHT
SURROUND-LEFT SURROUND-RIGHT
Khi cắm dây cáp loa vo Mô-đun Bộ thu Không dây, hãy lm như sau:
1.
2.
Khi cắm dây cáp loa vo loa vòm, hãy lm như sau:
1.
2.
3.
VIE - 8 VIE - 9
2. Kiểm tra trạng thái chờ sau khi cắm phích nguồn vo ổ cắm điện
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
POWER
STANDBY
LINK
STANDBY
LINK
Nhp nháy mu
xanh lam
Lắp Lõi ferit hình xuyến với dây nguồn của Soundbar
(Chỉ áp dụng khi kết nối Soundbar/hệ thống rạp chiếu phim tại nh dòng SWA-9000S v MS).
HDMI IN
HDMI OUT
(TV-ARC)
WIRELESS
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
Đáy Soundbar
1.
2.
3.
3. Nối bộ phận chính của Soundbar với Khóa an ton Không dây
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
1
2
Loại Giá
WIRELESS
WIRELESS
WIRELESS
1
2
Loại Treo Tường
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
Loại Gắn Đơn (WMN300SB, không được cung cp)
Các điểm cần chú ý khi mua thêm SWA-W700 (Loa trầm tùy chọn)
VIE - 8 VIE - 9
2. Kiểm tra trạng thái chờ sau khi cắm phích nguồn vo ổ cắm điện
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
POWER
STANDBY
LINK
STANDBY
LINK
Nhp nháy mu
xanh lam
Lắp Lõi ferit hình xuyến với dây nguồn của Soundbar
(Chỉ áp dụng khi kết nối Soundbar/hệ thống rạp chiếu phim tại nh dòng SWA-9000S v MS).
HDMI IN
HDMI OUT
(TV-ARC)
WIRELESS
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
POWER
IN
POWER
OUT
(For TV)
AC 100V~240V
4A~1.66A
Đáy Soundbar
1.
2.
3.
3. Nối bộ phận chính của Soundbar với Khóa an ton Không dây
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
1
2
Loại Giá
WIRELESS
WIRELESS
WIRELESS
1
2
Loại Treo Tường
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
Loại Gắn Đơn (WMN300SB, không được cung cp)
Các điểm cần chú ý khi mua thêm SWA-W700 (Loa trầm tùy chọn)
Leht laadib ...
Leht laadib ...
Leht laadib ...
Leht laadib ...
Leht laadib ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
teistes keeltes
- English: Samsung SWA-9000S User manual
- română: Samsung SWA-9000S Manual de utilizare
Seotud paberid
Muud dokumendid
-
LG CM8360 Kasutusjuhend
-
Taylor Model 340/341/342 Omaniku manuaal
-
LG XL5S Kasutusjuhend
-
Zebra ZD500 Omaniku manuaal
-
Avermedia AVerTV Hybrid Volar HX Quick Installation Manual
-
Philips GC1433/40 Kasutusjuhend
-
Domyos ESSENTIAL BIKE Kasutusjuhend
-
IKEA VÅGHÖJD LED Lamp Kasutusjuhend
-
Hilti HIT-HY 170 Kasutusjuhend
-