Dometic CWP 5311 Kasutusjuhend

Bränd: Dometic

Mudel: CWP 5311

Kategooria: Veeautomaadid

Tüüp: Kasutusjuhend

See käsiraamat sobib ka

Water System CWP 5311

USER MANUAL

GEBRAUCHSANWEISUNG

HANDLEIDING

MANUEL D’UTILISATION

MANUAL DEL USUARIO

MANUALE D’USO

BRUKSANVISNING

KÄYTTÖOHJE

8229016-50

Water Purifier CWP 5311

1. Lamp green – ON/OFF

2. Lamp yellow – FILTER

3. Lamp red – ALARM

4. Power switch – ON/OFF

5. Top cover

6. Outer casing

7. Pure water outlet

8. Inlet connection (tank)

9. Drain valve

10. Release button for top cover

11. Release button for drain valve

12. Tension reliever (supplied in the accessories box)

Accessories (supplied with the water purifier)

Hose clips 3 st

Wall/Floor assembly kit 1 st

Descaling agent 1 st

User manual 1 st

If the accessories are not complete, please contact your

local dealer.

1. Controlelampje groen – AAN/UIT

2. Controlelampje geel – FILTER

3. Controlelampje rood – ALARM

4. Schakelaar – AAN/UIT

5. Bovendeksel

6. Behuizingsmantel

7. Uitlaataansluiting schoon water

8. Inlaataansluiting (tank)

9. Afvoerklep

10. Ontgrendelingsknop voor bovendeksel

11. Ontgrendelingsknop voor afvoerklep

12. Ontspanner (wordt in de accessoiredoos geleverd)

Accessoires (worden met de waterzuiveraar geleverd)

Slangklemmen 3 stuks

Muur-/vloermontageset 1 stuks

Ontkalkingsmiddel 1 stuks

Handleiding 1 stuks

Wanneer de accessoires niet compleet zijn, verzoeken

wij u om contact op te nemen met uw plaatselijke

dealer.

1. Piloto verde: ON/OFF

2. Piloto amarillo: FILTRO

3. Piloto rojo: ALARMA

4. Interruptor de alimentación: ON/OFF

5. Cubierta superior

6. Carcasa exterior

7. Salida de agua purificada

8. Conexión de entrada (depósito)

9. Válvula de vaciado

10. Botón de apertura de la cubierta superior

11. Botón de apertura de la válvula de vaciado

12. Liberador de tensión (suministrado en la caja de

accesorios)

Accesorios (suministrados con el purificador de agua)

Abrazaderas para manguera 3 un.

Kit de montaje mural/en el suelo 1 un.

Desincrustante 1 un.

Manual del usuario 1 un.

Si el producto no incluye todos los accesorios, contacte

con su distribuidor local.

1. Grüne Lampe – EIN/AUS

2. Gelbe Lampe – FILTER

3. Rote Lampe – ALARM

4. Hauptschalter – EIN/AUS

5. Obere Abdeckung

6. Außengehäuse

7. Reinwasserauslass

8. Einlassanschluss (Tank)

9. Abflussventil

10. Freigabetaste für obere Abdeckung

11. Freigabetaste für Abflussventil

12. Zugentlastung (mitgeliefert im Zubehörkasten)

Zubehör (Mit dem Wasserreiniger mitgeliefert)

Schlauchklemmen 3 Stk.

Wand/Boden-Montagekit 1 Stk.

Entkalkungsmittel 1 Stk.

Gebrauchsanweisung 1 Stk.

Wenn das Zubehör nicht vollständig ist, wenden Sie

sich bitte an Ihren Händler.

1. Témoin lumineux vert – MARCHE/ARRÊT

2. Témoin lumineux jaune - FILTRE

3. Témoin lumineux rouge - ALARME

4. Interrupteur d’alimentation – MARCHE/ARRÊT

5. Capot supérieur

6. Boîtier extérieur

7. Sortie d’eau purifiée

8. Raccordement d’admission (réservoir)

9. Vanne de vidange

10. Bouton d’ouverture du capot supérieur

11. Bouton d’ouverture de la vanne de vidange

12. Système de relâchement de tension (fourni avec la

boîte d’accessoires)

Accessoires (fournis avec le purificateur d’eau)

Fixations pour tuyaux 3 pièces

Kit de montage mural/au sol 1 pièce

Agent de détartrage 1 pièce

Manuel d’utilisation 1 pièce

Si des accessoires manquent, contactez votre revendeur

local.

1. Spia luminosa verde – ON/OFF (acceso/spento)

2. Spia luminosa gialla – FILTER (filtro)

3. Spia luminosa rossa – ALARM (allarme)

4. Interruttore di corrente – ON/OFF (acceso/spento)

5. Copertura superiore

6. Corpo esterno

7. Uscita acqua depurata

8. Raccordo di entrata acqua (serbatoio)

9. Valvola di scarico

10. Pulsante di sblocco per la copertura superiore

11. Pulsante di sblocco per la valvola di scarico

12. Riduttore di tensione (imballato insieme agli

accessori)

Accessori (forniti insieme al depuratore)

Fermagli per flessibili 3 pezzi

Kit di montaggio a parete/pavimento 1 pezzo

Prodotto disincrostante 1 pezzo

Manuale d'uso 1 pezzo

Se gli accessori non sono completi, contattare il

rivenditore di zona.

PRODUCT DESCRIPTION

1. Lampa grön – ON/OFF

2. Lampa gul – FILTER

3. Lampa röd – ALARM

4. Knapp – PÅ/AV

5. Lock

6. Hölje

7. Renvatten utlopp

8. Inlopp (från tank)

9. Dräneringsventil

10. Lås för lock

11. Lås för dräneringsventil

12. Dragavlastare (levereras i tillbehörslådan)

Tillbehör (medlevererade)

Slangklämmor 3 st

Monteringsset vägg/golv 1 st

Avkalkningsmedel 1 st

Bruksanvisning 1 st

Om inte alla tillbehör finns med, kontakta

återförsäljaren.

1. Vihreä lamppu – ON/OFF (Päällä/pois päältä)

2. Keltainen lamppu – FILTER (Suodatin)

3. Punainen lamppu – ALARM (Hälytys)

4. Virtapainike – Virran kytkentä/katkaisu

5. Suojakansi

6. Ulkokotelo

7. Puhtaan veden poisto

8. Tuloliitäntä (säiliö)

9. Tyhjennysventtiili

10. Suojakannen vapautuspainike

11. Tyhjennysventtiilin vapautuspainike

12. Paineenvapautin (toimitetaan tarvikepakkauksessa)

Tarvikkeet (toimitetaan vedenpuhdistimen mukana)

Letkunpuristimet 3 kpl

Seinä-/lattiakokoonpanosarja 1 kpl

Kalkinpoistoaine 1 kpl

Käyttöohje 1 kpl

Jos jokin tarvikkeista puuttuu, ota yhteyttä

paikalliseen jälleenmyyjääsi.

PRODUCT DESCRIPTION

THANK YOU for entrusting us to supply your new water purifier.

To avoid problems, it is important for you to read the user manual. Read the “Safety information” and “Installation”

instructions particularly carefully. Everybody using the water purifier should be familiar with operation and safety features.

The user manual should be kept and stay with the water purifier if it is ever moved or changes owners.

The user manual’s English instructions begin on page 5.

VIELEN DANK

, dass Sie unseren Wasserreiniger gewählt haben.

Um Probleme zu vermeiden, ist es wichtig, dass Sie diese Gebrauchsanweisung lesen. Lesen Sie die Anweisungen unter

„Sicherheitsinformationen“ und „Installation“ besonders aufmerksam. Alle Personen, die den Wasserreiniger benutzen,

sollten mit seiner Bedienung und seinen Sicherheitsfunktionen vertraut sein.

Die Gebrauchsanweisung ist immer bei dem Wasserreiniger aufzubewahren. Geben Sie diese Unterlagen im Falle

eines Verkaufs an den neuen Besitzer weiter.

Die Deutsche Bedienungsanweisungen dieses Handbuchs beginnen auf Seite 19.

WIJ DANKEN U

voor uw keuze van onze waterzuiveraar.

Om eventuele problemen te voorkomen is het belangrijk dat u de handleiding zorgvuldig doorleest. Lees in het bijzonder

de instructies in de hoofdstukken “Veiligheidsinformatie” en “Installatie” zorgvuldig door. Iedereen die gebruik maakt van

de waterzuiveraar dient op de hoogte te zijn van de bediening van het apparaat en de bijbehorende veiligheidsaspecten.

Deze handleiding moet in de onmiddellijke nabijheid van de waterzuiveraar worden bewaard en moet aan de

nieuwe eigenaar worden overgedragen wanneer deze van eigenaar veranderd.

De instructies in het Nederlands beginnen op pagina 33 van de handleiding.

MERCI

de nous avoir fait confiance pour l’acquisition de votre nouveau purificateur d’eau.

Afin d’éviter tout problème, il est important de lire le manuel d’utilisation. Lisez avec attention les « Informations

concernant la sécurité » et les instructions d’« Installation ». Toutes les personnes qui utilisent le purificateur d’eau doivent

être familiarisées avec son fonctionnement et ses fonctions de sécurité.

Conservez le manuel d’utilisation avec le purificateur d’eau en cas de déménagement ou de changement de propriétaire.

Les instructions en français du manuel d’utilisation commencent page 47.

GRACIAS

por confiar en nosotros como proveedores de su nuevo purificador de agua.

Para evitar problemas, es importante que lea este manual del usuario. Le recomendamos que lea detenidamente los

apartados “Información sobre seguridad” e “Instalación”. Cualquiera que utilice el purificador de agua deberá estar

familiarizado con las instrucciones de uso y las advertencias de seguridad.

Conserve el manual del usuario junto con el purificador de agua, incluso si lo traslada a otro lugar o si cambia

de propietario.

El manual de instrucciones en español comienza en la página 61.

GRAZIE

per la fiducia che ci avete accordato acquistando questo nuovo depuratore d'acqua.

Per evitare problemi, è importante che l'utente legga attentamente le seguenti istruzioni, prestando particolare attenzione

ai capitoli "Informazioni sulla sicurezza" e "Installazione". Chiunque utilizza un depuratore dovrebbe conoscere le

modalità di funzionamento e le caratteristiche di sicurezza di tale apparecchio.

Conservare il presente manuale assieme al depuratore, in modo da poterlo sempre consultare se l'apparecchio viene

spostato o ceduto ad un altro proprietario.

Le istruzioni in italiano del manuale iniziano a pagina 75.

TACK

för att vi fick förtroendet att leverera Din nya vattenrenare.

För att undvika problem är det viktigt att Du läser igenom bruksanvisningen och noga följer ”Säkerhetsinformation” och

anvisningar om ”Installation”. Alla som använder vattenrenaren ska vara väl förtrogna med användningssätt och säkerhetsdetaljer.

Spara bruksanvisningen och låt den följa med vattenrenaren vid flytt eller ägarbyte.

Bruksanvisningens svenska handledning börjar på sida 89.

HALUAMME KIITTÄÄ SINUA

uuden vedenpuhdistimesi ostosta.

Lue käyttöohje ongelmien välttämiseksi. Lue turva- ja asennusohjeet erityisen huolellisesti. Vedenpuhdistimen käyttäjän on

tunnettava laitteen käyttö- ja turvallisuusominaisuudet.

Jos vedenpuhdistin siirretään toiseen paikkaan tai uudelle omistajalle, käyttöohjeet on toimitettava laitteen mukana.

Suomenkieliset käyttöohjeet alkavat sivulta 103.

INTRODUCTION

Guidelines for using the manual

The following symbols can be found in the text to guide you through the instructions:

Safety information

Environmental information

Step-by-step instruction

Hints and information

INFORMATION

Consumable parts

Following consumable parts can be obtained from your

dealer, quoting the part numbers.

Consumable part Part number

Filter - Carbon block 1507893-00

UV lamp 1940043-00

Fuse 5*20 mm 0.5 AT

(slow-blow) 1940137-00

Descaling agent 1507957-00

Recycling

• 80% of components used in the appliance and its pack-

aging are identified with symbols to assist the process of

recycling and disposal.

•This labelling is in accordance with international standards.

• Packaging parts are made from recyclable corrugated board

and can be deposited at collection points for recycling.

Consumable parts ..........................................5

Recycling ........................................................5

Child safety......................................................6

Installation and service....................................6

Use ..................................................................6

Regular care....................................................7

Draining ..........................................................8

Replacing filter ................................................9

Replacing UV lamp........................................10

Disinfection....................................................10

Descaling procedure ....................................11

Replacing fuse ..............................................12

Store the water purifier..................................12

Pulsating water flow ......................................13

Bypass the water purifier ..............................13

Trouble-shooting guide..................................13

Service and spare parts ................................14

Unpacking ....................................................15

Placing ..........................................................15

Before the water purifier is connected ..........15

Electrical connection ....................................16

Drain connection ..........................................17

Water connections ........................................17

Install the water purifier ................................17

Moving the water purifier ..............................18

CONTENTS

For the user

PRODUCT DESCRIPTION 2

CONTENTS 5

INTRODUCTION 4

INFORMATION 5

IF THE WATER PURIFIER

STOPS WORKING

13-14

For the installer

TECHNICAL DATA 14

INSTALLATION 15-18

SAFETY INFORMATION 6

USING THE WATER PURIFIER 7

MAINTENANCE 7-11

• The water purifier is installed on the cold water pipe, and

consequently only the cold water is purified. Note that the

hot water is not treated.

• Check that the water you want to purify meets the require-

ments specified in “Technical data”.

•A pulsating water flow from the water purifier means that

the purifier is in standby or that the UV lamp is heating up.

Do NOT drink this water.

• Do not attempt to modify or alter the water purifier in any way

at all. This could result in personal injury and/or damage to

property. These eventualities are not covered by any warranty.

• The water purifier has a switch that disconnects the purifier

from electricity when top cover is removed. Do not try to

disconnect or shut off this switch when the top cover is

removed. This could result in personal injury and is not

covered by any warranty.

• If the water purifier is not going to be used and exposed for

temperatures below 0°C the water purifier has to be stored,

see section “Store the water purifier”.

• Once a month connections should be checked for leakages.

•In tanks containing standing water there is a risk of bacter-

ial growth. If any changes in taste or smell are detected, use

the trouble-shooting table and try to solve the problem. If

the result is unsatisfactory, do not drink the water. Contact

your dealer.

Child safety

• Do not let children play with the water purifier.

• Never leave packaging material lying around so that chil-

dren can play with it.

Installation and service

• The water purifier must be preceded by a safety switch

where the + terminal is disconnected. The disconnection

distance is at least 3 mm.

• The system (tank and hoses) has to be disinfected before

the water purifier is installed, see section “Disinfection”.

• It is important that the purifier is installed standing upright

or wall mounted (vertical), horizontal in relation to the

floor. This is to ensure that drainage and leakage indication

function correctly.

• The purifier must be installed in a location that does not

freeze. The temperature when in use must not fall below

+2°C. Also avoid hot locations and direct sunlight.

• The water purifier must be placed close to the drinking-

water tap and installed in the cold water pipe with short

hoses (< 2 m). Long pure water hoses increase the risk of

bacterial growth and should not be used.

• The water pump must be connected to the water purifier;

otherwise the purifier will not work correctly.

• Ensure that hoses and wires do not become kinked or dam-

aged when the water purifier is installed or moved.

• Use only genuine spare parts. See “Consumable parts”.

•A damaged water purifier must be disconnected.

Use

• The water purifier is designed to produce enough water

required for a normal household in mobile homes.

• The water purifier must never be operated without the filter,

except during the disinfection and descaling procedures.

• If the water purifier contains descaling agents, it must be

flushed before pure water may be used.

•The system (tank, hoses and water purifier) must be disin-

fected regularly.

• At the end of the water purifier’s useful life, disconnect the

power to the water purifier using the safety switch in the

central electrical unit. Disconnect the electrical wires from

the water purifier. Carefully insulate the wires. Make sure

that children cannot play with the wires.

For information on disposal of your water purifier, contact

your local authority or your dealer.

SAFETY INFORMATION

Before using the water purifier for the first time:

1. Check that the filter is in place in the water purifier.

2. Open the shut off valve on the inlet hose.

3. Start the water purifier by pressing the ON/OFF

button, see fig. A. The ON/OFF lamp now flashes

green, indicating that the UV lamp is heating up in

order to purify the water. If the tap is opened dur-

ing this heating up phase, a pulsating flow of non-

purified water is obtained.

4. Wait until the ON/OFF lamp glows with a steady

green light. (Depending on the ambient tempera-

ture, this time can vary up to 15 minutes.)

5. In order to flush the filter, open the cold-water tap

and let water flush for approx. 1 minute.

The water purifier is ready to be used.

Normal use:

The water purifier is in standby mode and the ON/OFF lamp

glows green.

1. Open the cold-water tap. The water purifier automati-

cally starts and pure water is supplied from the purifier.

2. Close the tap.

The water purifier is installed on the cold water

pipe, and consequently only the cold water is

purified.

Note that the hot water is not treated.

If the water purifier has not been in use for 24

hours or longer, flush it for approx. 1 minute before

consuming pure water.

MAINTENANCE

Regular Care

Listed below are things you need to remember for regular

care and maintenance of your water purifier.

USING THE WATER PURIFIER

When the water purifier has been installed according to the section ”Installation” it is ready to be used.

• Check the indicator lamps on the control panel

once a week to ensure the water purifier is function-

ing correctly.

•Keep the outside of the water purifier clean. Wipe

off using a damp cloth.

Do not pour water over the unit and do not use

any corrosive or abrasive cleaning products.

• Be sure to replace filter in time. The level of impuri-

ties in your water tank determines the life of the fil-

ter. See section “Replacing filter”.

The filter needs replacing every 6 months, when

indicated by the lamps on the control panel, when

the water flow has decreased to about half the nor-

mal amount or if the water has an unpleasant taste.

Take care not to spill any water on the water purifier.

After replacing filter, allow the used filter to drain

for a few minutes. It can then be discarded in your

ordinary household waste as it does not contain any

substances that are hazardous to the environment

(assuming the water purifier has been used for the

purpose for which it was intended).

•Once a month check for leaks in all the connections

and hoses to the water purifier.

• The system (tank, hoses and water purifier) must be

disinfected regularly, see section “Disinfection”.

• The water purifier needs to be descaled every

3 months during continuous operation or when the

flow has decreased and cannot be restored by

replacing the filter, see section “Descaling”.

Draining

Storage below temperature 0°C (32°F) and maintenance requires

that the purifier is emptied.

1. Check that the water from the drain hose is led out under

the caravan.

2. Shut off the water purifier with the ON/OFF button.

3. Disconnect the power supply to the water purifier with

the safety switch in the central electrical unit.

4. Press the Release button at the back of the purifier, see

fig. B and remove the top cover, see fig. C.

5. Close the shut off valve on the inlet hose.

6. Open the drain valve by lifting up the release button (1)

and pulling the valve out (2), see fig. D.

7. Open the filter housing lid by turning it as indicated on

the lid, see fig. E.

8. When the water purifier is empty, close the valve by lift-

ing up the release button and pushing in the valve (3),

see fig. D.

Note! Ensure that the edge of the catch really locks the

drain valve in the inner position.

MAINTENANCE

Replacing filter

The filter needs to be replaced:

- At least every 6 months.

- When filter lamp is lit on the control panel.

-When the flow has decreased to about half the

normal amount.

- If the water from the water purifier has an

unpleasant taste.

Filter replacement when the filter lamp is lit:

1. Empty the water purifier, see section “Draining”.

2. Fold up the handle and lift out the old filter in accor-

dance with the arrow in figure F.

Take care not to

drip any water on the water purifier.

3. If the filter housing is dirty, clean the inside of the fil-

ter housing carefully with a dishwashing brush.

Clean with a dishwashing brush and water only.

Do not damage the tube in the centre of the filter

housing.

4. Install a new filter.

5. Check that the seal is in place in the lid. Refit filter

housing lid by pressing and turning in the opposite

direction to the arrows.

6. Refit the top cover and switch on the current to the

water purifier using the safety switch in the central

electrical unit.

7. Open the shut off valve on the inlet hose and start the

purifier by pressing the ON/OFF button.

8. Turn off the filter lamp by pressing in the ON/OFF

button, see fig. G, and keeping it pressed until the fil-

ter light goes out (approx. 5 seconds).

9. Open the cold-water tap and flush the water purifier

for 1 minute.

Filter replacement before indication and when the filter lamp

is flashing:

1. Replace filter in accordance with point 1-7 above.

2. Switch off the water purifier with the ON/OFF button.

3. Press in the ON/OFF button and keep it pressed.

After 3 seconds the filter lamp comes on.

4. Release the button when the filter lamp goes out.

5. Start the water purifier with the ON/OFF button.

MAINTENANCE

Replacing UV lamp

The UV lamp needs to be replaced when the alarm lamp lights up

on the control panel. First check whether the water purifier needs

to be descaled instead.

Use only a genuine UV lamp from your dealer, to

ensure that microbiologically safe water is supplied

from the water purifier. See section “Consumable

parts”.

1 Disconnect the water purifier by pressing the

ON/OFF button.

2. Disconnect the power supply to the water purifier with

the safety switch in the central electrical unit.

3. Remove top cover.

4. Remove the insulation above the UV lamp. Remove

the socket from the lamp by pulling it straight up, see

fig. H

5. Pull out the lamp, see fig. I.

Do not touch the new lamp glass with your fin-

gers, as fingerprints reduce the UV intensity.

6. Install a new UV lamp. Carefully press the lamp down

until it clicks into place and no longer can be turned.

7. Connect the socket to the new lamp.

8. Refit the insulation.

9. Refit the top cover and switch on the current to the

water purifier using the safety switch in the central

electrical unit.

10. Start the water purifier with the ON/OFF button.

11. Flush the water purifier for 1 minute.

Return the old UV-lamp to your dealer as it contains

mercury, which is very harmful to the environment.

Disinfection

In tanks containing standing water there is a risk of bacterial and

algae growth. The tank, hoses and water purifier must be disin-

fected regularly.

Disinfectant can be purchased from caravan/mobile homes dealers.

1. Empty the water purifier, see section “Draining”.

2. Remove the filter, see fig. F on the previous page.

3. Refit the filter lid and the top cover on the water puri-

fier and switch on the current to the water purifier

using the safety switch in the central electrical unit.

4. Open the shut off valve on the inlet hose and switch

on the water purifier with the ON/OFF button.

5. Disinfect the system according to the instructions on

the disinfectant’s packaging.

6. Flush the system according to the instructions on the

disinfectant’s packaging.

7. Empty the water purifier again, see section “Draining”.

8. Refit the filter.

9. Refit the filter lid and the top cover on the water puri-

fier and switch on the current to the water purifier

using the safety switch.

10. Open the shut off valve on the inlet hose.

11. Start the purifier by pressing the ON/OFF button.

MAINTENANCE

Descaling procedure

The water purifier needs to be descaled every 3 months during

continuous use. Descaling agent can be ordered from your dealer,

see “Consumable parts”.

1. Empty the water purifier, see section “Draining”.

2. Remove the filter.

3. Mix about half a bottle (50 g) of descaling agent in a

jug containing 2 dl lukewarm water and stir until fully

dissolved. Pour into the filter housing, see fig. J, and

fill up with water.

4. Refit the filter housing lid and the top cover and

switch on the current to the water purifier using the

safety switch in the central electrical unit.

5. Open the shut off valve on the inlet hose and start the

purifier by pressing the ON/Off button.

6. Open the cold-water tap and produce water for about

5 seconds so that the agent goes into the purifier.

Close the tap.

Water containing descaling agent will be produced.

This water must not be drunk.

7. Allow the descaling agent to work for about 10 minutes.

8. Open the cold-water tap for at least 1 minute to flush

the water purifier.

9. Empty the water purifier, see section “Draining”.

10. Put the filter back.

11. Refit the filter lid and the top cover and switch on the

current to the water purifier using the safety switch in

the central electrical unit.

12. Open the shut off valve on the inlet hose and start the

purifier by pressing the ON/OFF button.

13. Allow the water purifier to flush pure water to the

drain for about 5 minutes. This will remove any traces of

descaling agent.

14. Close the tap.

MAINTENANCE

Replacing fuse

1. Shut off the water purifier with the ON/OFF button.

2. Disconnect the power supply to the water purifier with

the safety switch in the central electrical unit.

3. Remove top cover by pressing the Release button at

the back of the purifier. Then unhook the top cover at

the front.

4. Carefully remove the fuse from the purifier using e.g. a

flat screwdriver, see fig. K.

5. Install a new fuse in the water purifier, see section

“Consumable parts”.

6. Refit the top cover.

7. Switch on the power supply to the water purifier with

the safety switch in the central electrical unit.

8. Start the purifier by pressing the ON/OFF button.

Store the water purifier

If the water purifier is not going to be used for an extended

period, it should be put into storage.

1. Empty the water purifier, see section ”Draining”.

2. Remove the filter. Let it drain for a few minutes and dis-

card it. (The filter can be discarded with ordinary house-

hold waste.)

3. Refit the filter cover and the cover for the purifier.

When the water purifier is going to be used again:

Install a new filter in the filter housing, see section “Replacing fil-

ter”, open the shut off valve on the inlet hose and flush the water

purifier for approx. 1 minute.

MAINTENANCE

Pulsating water flow

If the water purifier is delivering a pulsating flow, the purifier is in standby or the UV lamp is heating up. The

water is not purified. Do NOT drink this water.

Use the trouble-shooting table to rectify the problem that has led to the pulsating flow.

Bypass the water purifier

If the water purifier is malfunctioning and you need water from the tank, the purifier can be bypassed. Always try to repair the purifier first.

IF THE WATER PURIFIER STOPS WORKING

1. Shut the water purifier off by pressing the ON/OFF button.

2. Press the ON/OFF button (approx. 10 seconds) until red

lamp lights up on the panel. Release the button. All 3 lamps

will flash.

3. Open the cold-water tap. The water purifier will work for 5

seconds, shut down for 5 seconds, work for 5 seconds and so

on. This is to remind you that the water is not purified.

The water delivered from the water purifier is not

purified. Do NOT drink this water.

SYMPTOM

CHECK/REMEDIAL ACTION

• The water purifier is not receiving power.

- Is the mobile home’s main power on?

- Is the safety switch in the central electrical unit turned on?

- Is the water purifier switched on?

- Is the top cover in place?

- Check that the water purifier is connected to power.

- Check the fuse on the caravan’s/mobile home’s distribution board.

-Check the fuse in the water purifier.

- Check that all the wires are intact.

• The UV lamp is heating up. If the tap is opened, a pulsating flow of water that has not been purified will be produced.

- Wait until the lamp glows with a steady green light. The water purifier is now ready to be used.

• Time for filter replacement.

- Change filter in accordance with section “Replacing filter”.

• Emergency stop due to filter not having been replaced.

- Change filter in accordance with section “Replacing filter”.

• UV chamber has a lime deposit

-Descale the water purifier in accordance with section ”Descaling”.

• The UV lamp is not working.

- Change UV lamp in accordance with section “Replacing UV lamp”.

• Leakage inside the water purifier.

- Check that the filter lid and hoses are properly tightened.

-Disconnect the water purifier and empty the leaked water through the hole on the front of the cover.

- Connect the water purifier. If leakage occurs again, call Service.

• The water purifier is bypassed.

- The water purifier is not working. If you cannot rectify the problem, call Service.

• Voltage to the purifier is low.

- Is another appliance connected to same circuit at the same time, e.g. TV? Shut down other appliances.

• Mobile home’s/caravan’s battery level low.

- Charge the battery.

- Check that the wiring is in accordance with the data in the installation section.

• The water purifier is in standby or the UV lamp is heating up.

- Check the water purifier’s control panel and read off the fault code.

• The purifier has not been used for a long period.

- Flush the purifier for 2 minutes.

- Change filter according to section “Replacing filter”.

-Disinfect the system (tank, hoses and water purifier).

The water has an

unpleasant taste

and/or odour

If you are still having problems with your water purifier after having read through and tried the procedures described in the trouble-shoot-

ing table, contact your dealer.

Trouble-shooting guide

Lamp off

Lamp on

Lamp flashing

Pulsating flow

Service and spare parts

Before calling service, use the trouble-shooting guide “If the water purifier stops working” to try to rectify the fault yourself. If service

is called in to solve a problem that is in this list, there is a risk that you will be responsible for the cost. The same applies if you have

used the appliance for a purpose other than that for which it is intended.

Note that electrical faults should always be rectified by a certified electrician.

Give the appliance’s product and serial numbers according to the data plate (see fig. A). The plate is located on the back of the water

purifier.

You can record these details here:

PROD.NO ............................................................

SER.NO ................................................................

Purchase date ........................................................

IF THE WATER PURIFIER STOPS WORKING

Data

Dimensions:

- height 340 mm

- depth 140 mm

- width 290 mm

Weight:

- on delivery 3.0 kg

- filled with water 3.7 kg

Capacity: 3.8 (±0.8) litres/minute 0.84 (±0.18) gpm (UK)

Inlet pressure: 0.3-5 bar (30-500 kPa) 5-72 PSI

Working temperature:

- ambient and water temperature 2 - 43 °C

Electrical data:

Connection 12-24 V DC

Low voltage protection 9 V

Resetting low voltage protection 10 V

Power consumption (excl. pump output):

- during purification 10 W

- during heating 12 W

- in standby 1 W

Fuse, slow blow 6.3 A

Pump current, max: 5 A

Requirements on feed water to water purifier

The tank must be filled with municipal water. In standing water (tank water) there is a risk of bacterial growth. The water purifier is

intended to purify the tank water.

Turbidity < 7.5 FNU

Chlorine 4 mg/litre

Organic content < 1 mg/litre

TECHNICAL DATA

INSTALLATION

Unpacking

Check the purifier for any signs of damage and check that no

accessories are missing. Any damage, faults or missing parts

should be notified to the dealer immediately.

Do not leave packaging material lying around so that children can

play with it.

Placing

• The water purifier should be installed close to the

cold-water tap so that the pure water hoses are as short

as possible, for example underneath the sink or under

the couch near the sink.

Long pure water hoses (> 2 m) increase the risk of

bacterial growth.

• It is important that the purifier is installed standing

upright or wall mounted (vertical), horizontal in rela-

tion to the floor. This is to ensure that drainage and

leakage indication function correctly.

• It should be easy to inspect the control panel.

• It should be possible to open the top cover so that the

filter container and UV lamp can be accessed.

• Connections can be routed in any direction from the

connection point. Make sure no connections are

kinked or damaged. Hoses and wires must not be

stretched either. The dimensions of the area required

for the water purifier are, see fig. A:

w: 340 mm

h: 390 mm (for maintenance h: 640 mm)

d: 180 mm

1. Mount the bracket (with 4 screws) on the wall or on

the floor, see fig. B.

2. Drill a hole in the floor to lead out the drain hose.

3. Remove the top cover by pressing the release button

on the rear, see fig. C. Lift the rear edge of the top

cover and unhook the cover at the front, see fig. D.

4. An adhesive sheet with information in various lan-

guages is available as an accessory. Choose the desired

language and install in the top cover on the purifier.

Before the water purifier is connected

Tank and hoses have to be disinfected before the water

purifier is connected. See section “Disinfection”,

points 5-6.

Hole for

drainage

Electrical connection

The electrical connection depends on which water pump is

installed; there are two variants:

Switch-controlled pump. The tap’s knob actuates an

electrical switch that connects the pump.

Pressure-controlled pump. A pressure sensor on the

pump detects that the water pressure drops when the

tap is opened, and then connects the pump electrically.

Irrespective of which of the two pump systems is in use, the

following applies:

• The water purifier’s screw terminal is located under

the top cover and is marked with number 1-4 in accor-

dance with fig. E.

•Route the connecting cable with a cross section of

1.5 mm

(measure with slide callipers on the stripped

conductor, the diameter must be at least approx.

1.4 mm).

• To avoid excessively large voltage drops, the connect-

ing cables must be kept as short as possible.

• The purifier’s terminal no. 3-4 must ALWAYS be

connected via a fuse and a safety switch to the battery

(12-24 V).

• The purifier’s terminal no. 1-2 is connected to the

existing pump.

Be sure to connect the water purifier and the pump

to the correct polarity (positive and negative).

Switch-controlled pump

1. Connect cable (negative polarity) from the water purifier’s

terminal block, no. 1, to the pump’s negative terminal.

2. Connect cable (positive polarity) from the water puri-

fier’s terminal block, no. 2, to one side of the tap’s

electrical switch.

3. Connect cable from the other terminal on the tap’s

electrical switch to the pump’s positive terminal.

4. Connect ground lead (negative polarity) from the cen-

tral electrical unit to the water purifier’s terminal

block, no. 3.

5. Connect cable (positive polarity) from the pump’s fuse

to the water purifier’s terminal block, no. 4.

Pressure-controlled pump

1. Connect cable (negative polarity) from the water purifier’s

terminal block, no. 1, to the pump’s negative terminal.

2. Connect cable (positive polarity) from the water purifier’s

terminal block, no. 2, to the pump’s positive terminal.

3. Connect ground lead (negative polarity) from the cen-

tral electrical unit to the water purifier’s terminal

block, no. 3.

4. Connect cable (positive polarity) from the pump’s fuse

to the water purifier’s terminal block, no. 4.

INSTALLATION

The water purifier must be preceded by a safety

switch where the + terminal is disconnected. The

disconnection distance is at least 3 mm.

The cables from the battery (in the central electri-

cal unit) must be protected with a fuse.

The water purifier MUST be connected via the

pump in order for the purifier to work correctly.

Wiring

1. Route the wiring beside the insulation and out at the

rear of the product. Screw the tension reliever into

place. See fig. F.

Drain connection

1. Lead out the drain hose throw the hole in the floor,

see fig. G.

2. Connect the hose to the drain valve and install the hose

clip around the hose. Check that the drain valve is

pressed in and locked (catch pressed down). See fig. H.

Water connections

The water purifier must be connected to the cold-water pipe. To

make maintenance easier, install a shut off valve on the inlet hose.

1. Install a shut off valve on the inlet hose. Leave the

valve closed.

2. Connect feed water (from the tank) to the inlet (right)

connection on the water purifier, see fig. I (A).

3. Connect the pure water (left connection) from the

water purifier to the drinking water tap, see fig. I (B).

Install the hose clip.

Make sure the hoses are connected in accordance

with the above instructions.

Install the water purifier

1. Hook the bracket into the top of the water purifier.

Push in the bottom of the water purifier. See fig. J.

2. Refit the top cover on the purifier.

3. Open the shut off valve and switch on the power sup-

ply to the water purifier with the safety switch in the

central electrical unit.

INSTALLATION

(B)

(A)

Moving the water purifier

1. Shut the water purifier off by pressing the

ON/OFF button.

2. Empty the water purifier, see section ”Draining”.

3. Remove the filter.

4. Disconnect the electrical connections.

5. Disconnect all the hoses.

6. Unhook the water purifier from the bracket.

7. Reconnect the electrical cables.

8. Reconnect the hoses.

When the water purifier is going to be used again,

install in accordance with section “Installation”.

Do not forget to insert a new filter in the filter

housing, see section “Replacing filter”.

INSTALLATION

Hinweise zur Benutzung des Handbuchs

Folgende Symbole im Text führen Sie durch die Anweisungen:

Sicherheitsinformationen

Umweltschutzinformationen

Schritt-für-Schritt-Anweisungen

Hinweise and Informationen

INFORMATIONEN

Verbrauchsmaterialien

Folgende Verbrauchsmaterialien können Sie unter Angabe

der Artikelnummern von Ihrem Händler bekommen.

Ersatzteil Artikelnummer

Filter - Karbonblock 1507893-00

UV-Lampe 1940043-00

Sicherung 5*20 mm 0,5 AT

(träge) 1940137-00

Entkalkungsmittel 1507957-00

Recycling

• 80 % der Komponenten dieses Haushaltsgeräts und seiner

Verpackung sind durch Symbole gekennzeichnet, um den

Recycling- und Entsorgungsprozess zu unterstützen.

• Diese Kennzeichnung entspricht den international

üblichen Standards.

• Die Verpackungselemente bestehen aus Altpapier und

können an Altpapiersammelstellen abgegeben werden.

Verbrauchsmaterial ......................................19

Recycling ......................................................19

Kinder............................................................20

Installation und Wartung................................20

Benutzung ....................................................20

Regelmäßige Pflege......................................21

Gerät leeren ..................................................22

Filterwechsel ................................................23

UV-Lampe wechseln ....................................24

Desinfektion ..................................................24

Entkalkungsverfahren....................................25

Sicherung ersetzen ......................................26

Wasserreiniger einlagern ..............................26

Pulsierender Wasserfluss..............................27

Wasserreiniger umgehen (Bypass) ..............27

Fehlersuchtabelle ..........................................27

Kundendienst und Ersatzteile........................28

Auspacken ....................................................29

Platzierung ....................................................29

Vor dem Anschluss des Wasserreinigers......29

Elektrische Anschluss ..................................30

Ablaufanschluss ............................................31

Wasseranschlüsse ........................................31

Wasserreiniger installieren ............................31

Umstellen des Wasserreinigers ....................32

INHALT

Für den Anwender

PRODUKTBESCHREIBUNG 2-3

INHALT 19

EINFÜHRUNG 4

INFORMATION 19

WENN DER WASSERREINIGER NICHT

MEHR ARBEITET

Für den Installateur

TECHNISCHE DATEN 28

INSTALLATION 29-32

SICHERHEITSINFORMATIONEN 20

BENUTZUNG DES WASSERREINIGERS 21

WARTUNG 21-26

• Der Wasserreiniger wird in der Kaltwasserleitung installiert,

daher wird nur das Kaltwasser gereinigt. Beachten Sie, dass

das Warmwasser nicht behandelt wird.

• Stellen Sie sicher, dass das Wasser, das Sie reinigen möch-

ten, die Anforderungen unter „Technische Daten“ erfüllt.

• Wenn der Wasserreiniger einen pulsierenden Fluss abgibt,

ist der Wasserreiniger im Standby-Modus oder die UV-

Lampe wird aufgeheizt. Dieses Wasser NICHT trinken.

• Versuchen Sie nicht, den Wasserreiniger irgendwie zu ver-

ändern. Dies könnte zu Personenschäden und/oder zu

Sachschäden führen. Diese Eventualitäten werden von kei-

ner Garantie abgedeckt.

• Der Wasserreiniger besitzt einen Schalter, mit dem der

Wasserreiniger bei Entfernen der oberen Abdeckung vom

Stromnetz getrennt wird. Versuchen Sie nicht, die Kabel zu

diesem Schalter zu unterbrechen oder ihn zu überbrücken,

wenn die obere Abdeckung entfernt ist. Dies könnte zu

Personenschäden führen, die von keiner Garantie abge-

deckt sind.

• Wenn der Wasserreiniger nicht benutzt und Temperaturen

unter 0°C ausgesetzt werden soll, muss der Wasserreinigen

wie unter „Wasserreinigers einlagern“ beschrieben eingela-

gert werden.

• Einmal monatlich sollten die Anschlüsse auf

Undichtigkeiten untersucht werden.

• In Tanks mit stehendem Wasser besteht das Risiko eines

Bakterienwachstums. Wenn Veränderungen des Geschmacks

oder Geruchs festgestellt werden, verwenden Sie die Fehler-

suchtabelle, um zu versuchen, das Problem zu lösen. Wenn

das Ergebnis nicht zufrieden stellend ist, das Wasser nicht

trinken. Nehmen Sie in diesem Fall bitte Kontakt mit

Ihrem Fachhändler auf.

Kinder

• Lassen Sie Kinder nicht unbeaufsichtigt mit dem

Wasserreiniger spielen.

• Lassen Sie kein Verpackungsmaterial herumliegen, damit

Kinder nicht damit spielen können.

Installation und Wartung

• Vor den Wasserreiniger muss ein Sicherheitsschalter instal-

liert werden, durch den der Anschluss + getrennt wird. Der

Trennabstand muss mindestens 3 mm betragen.

• Das System (Tank und Schläuche) muss desinfiziert wer-

den, bevor der Wasserreiniger installiert wird, siehe

Abschnitt „Desinfektion“.

• Es ist wichtig, dass der Wasserreiniger aufrecht stehend oder

an der Wand befestigt installiert wird (vertikal), horizontal

in Bezug auf den Boden. Dadurch wird sichergestellt, dass

Abfluss und Undichtigkeitsanzeige korrekt funktionieren.

• Der Wasserreiniger muss an einem Ort installiert werden,

an dem es nicht friert. Die Gebrauchstemperatur darf +2 °C

nicht unterschreiten. Heiße Aufstellungsorte und direkte

Sonneneinstrahlung ebenfalls vermeiden.

• Der Wasserreiniger muss dicht am Trinkwasserhahn plat-

ziert und mit kurzen Schläuchen (< 2 m) in der Kaltwasser-

leitung installiert werden. Lange Reinwasserschläuche erhö-

hen das Risiko von Bakterienwachstum und sollten nicht

verwendet werden.

• Die Wasserpumpe muss an den Wasserreiniger angeschlos-

sen werden, andernfalls wird der Wasserreiniger nicht kor-

rekt arbeiten.

• Stellen Sie sicher, dass Schläuche und Kabel bei der

Installation und Umstellung des Wasserreinigers nicht

geknickt oder beschädigt werden.

• Nur Originalersatzteile verwenden. Siehe „Verbrauchsmaterial“.

• Ein beschädigter Wasserreiniger muss von den Leitungen

getrennt werden.

Benutzung

• Der Wasserreiniger wurde so entwickelt, dass genügend

Wasser für einen normalen Haushalt in Wohnwagen produ-

ziert wird.

• Der Wasserreiniger darf niemals ohne Filter betrieben werden,

außer während der Desinfektions- und Entkalkungsverfahren.

• Wenn der Wasserreiniger Entkalkungsmittel enthält, muss er

gespült werden, bevor das Reinwasser verwendet werden kann.

• Das System (Tank, Schläuche und Wasserreiniger) muss

regelmäßig desinfiziert werden.

• Am Ende des Lebenszyklus des Wasserreinigers den Strom

zum Wasserreiniger mit dem Sicherheitsschalter im zentralen

Elektroschaltschrank unterbrechen. Die Elektrokabel vom

Wasserreiniger lösen. Die Drähte sorgfältig isolieren. Stellen

Sie sicher, dass Kinder nicht mit den Kabeln spielen können.

Für Information über die Entsorgung Ihres Wasserreinigers

wenden Sie sich an Ihre lokalen Behörden oder Ihren

Fachhändler.

SICHERHEITSINFORMATIONEN

Leht laadib ...

Dometic CWP 5311 Kasutusjuhend

Bränd: Dometic

Mudel: CWP 5311

Kategooria: Veeautomaadid

Tüüp: Kasutusjuhend

See käsiraamat sobib ka

Water System CWP 5311

Laadige alla PDF

aruanne

teistes keeltes

Deutsch: Dometic CWP 5311 Benutzerhandbuch
italiano: Dometic CWP 5311 Manuale utente
español: Dometic CWP 5311 Manual de usuario
svenska: Dometic CWP 5311 Användarmanual
français: Dometic CWP 5311 Manuel utilisateur
Nederlands: Dometic CWP 5311 Handleiding

Dometic CWP 5311 Kasutusjuhend

See käsiraamat sobib ka

Dometic CWP 5311 Kasutusjuhend

teistes keeltes

Muud dokumendid