LAMPE UTILITAIRE DEL

GUIDE D’INSTALLATION RAPIDE

REMOVING THE NECK CURTAIN / NECK ROLL

1. Place your helmet upside down on a flat surface

on soft cloth.

2. Start from the front of the helmet and gently pull on

the neck curtain / neck roll toward the center of the

helmet.

3. Slide out the neck curtain / neck roll from the

REMOVING THE ACCESSORIES COVERS

5. Remove the right accessories cover by

pulling it away from the helmet.

Product may differ from picture shown. Printed in China.

®™ and the BRP logo are trademarks of

Bombardier Recreational Products Inc.

INSTALLING THE UTILITY LIGHT

6. Pass the wire sideways into the slot and

magnetically clip the utility light.

OPTION 1: EQUIPPED WITH A VIBE

under the trim.

2.3. Install the battery housing in the helmet.

cable.

INSTALLING THE REAR TRIM

under the trim.

CABLE MANAGEMENT

7. Place the connectors and cables in the cavity

next to the battery housing.

INSTALLING THE NECK CURTAIN / NECK ROLL

8. Align each of the 6 ‘’snaps’’ with the triangle on the trim

and press one by one to be sure each one is engaged in the

you could damage them.

OPERATING INSTRUCTIONS

1. To turn ON the light, open the utility lamp

using the tab below.

2. To turn OFF the light, simply fold down the

utility lamp.