myRogerMic 1.0
User Guide
2
Getting started
myRogerMic is an app developed by Sonova, a world leader in hearing solutions
based in Zurich, Switzerland. Read the user instructions thoroughly in order to
benet from all the possibilities it oers.
Intended use
Intended use of the myRogerMic app is to select, adjust and save existing
Roger On™ functions and to access status information, wirelessly in a visualized
way.
The Bluetooth® word mark and logos are registered trademark owned by Bluetooth SIG, Inc. and any use of such
marks by Sonova AG is under license
iPhone® is a trademark of Apple Inc., registered in the U.S. and other countries.
Android™ is a trademark of Google LLC
IOS® is a registered trademark or trademark of Cisco Systems, Inc. and/or its aliates in the United States and
certain other countries of Cisco Inc.
Compatibility information:
For the use of the myRogerMic app, Phonak Roger On™ or Phonak
Roger On™ iN is required.
myRogerMic can be used on phones with Bluetooth® Low-Energy
(LE) capability running on iOS® Version 13 or newer.
The app can be used on Google Mobile Services (GMS) certied
Android™ devices supporting Bluetooth® 4.2 and Android™ OS 7.0
and newer.
Contents
Getting started 2
Quick overview 3
Installing the myRogerMic app 4
Pairing with Roger On device 5
Troubleshooting the pairing 6
Troubleshooting connection issues with Roger On device 7
Microphone mode functions 8
Beam steering 9
Creating custom mode 10
MultiBeam 2.0 Technology 11
Add, select and remove your Roger On device(s) 12
MultiTalker Network 13
Other functionalities 14
Important safety information, Symbol explanation 15
3
Quick overview
Roger On Roger On
Comfort
Battery state
Current device
state Beam steering
Save current settings
as custom mode
Activate all
beams at once
Navigation
Mic mode
selection
Mute/
Unmute
Roger On
TableAuto PresenterPointing
Roger On
TableAuto PresenterPointing
4
Installing the myRogerMic app
• Connect your smartphone to the internet via WiFi or cellular data
• Turn on your smartphone’s Bluetooth®
Privacy notice
In order to use the app, you
must click on I agree to
accept the privacy notice to
continue.
Open myRogerMic app
Open the app and click on
Next or Skip the onboarding
information.
Product improvement
By sharing usage data, you
can help us improve our
products.
Click on I agree, if you
want to share anonymized
usage data or No, thanks,
if you prefer not.
Download myRogerMic app
Download the app from the
store. After installation open
the myRogerMic app.
Help us improve
By providing usage data, you will enable us to
learn and improve the product and services.
You can always change this in the app settings
in the “analytics“ section.
I agree
I agree
No, thanks
Back
Sonova AG
64 Ratings
16+
5.0 Age
myRogerMic
Get
Welcome to myRogerMic
app
Start using your Roger On™ with the app and
discover all its functionalities.
Let‘s take a look!
Next
Skip
Privacy Notice
5
Pairing with Roger On device
To connect Roger On with the myRogerMic app, please follow the instructions below. You can pair up to ten Roger On
devices to the app. To learn how to add more devices go to section Add, select and remove your Roger On device(s).
Pairing instructions
Follow the instructions
provided on the screen and
tap Continue.
Searching
The app looks for Roger On
devices and will display them
once they are detected. This
may take a few seconds.
Select
Tap Select when your Roger
On appears in the list. You
cannot pair multiple Roger
On devices at the same time.
Each Roger On device must
be paired separately.
Pairing complete
The Roger On is now paired.
The app will automatically
proceed to the next step.
Setup complete
You are now ready to use
all functionalities in the
myRogerMic app. Tap Ok
to access the main screen.
Connect your Roger On to
the app
Pairing complete
Searching Searching
Please turn off your Roger On and then turn it
on again to be able to connect it to the
myRogerMic app. The Bluetooth pairing mode
will be enabled for 3 minutes.
You are now ready to use the myRogerMic
app
Looking for Roger devices Looking for Roger devices
Roger On paired
Roger On
Continue
Select
Roger On Select
Ok
6
Troubleshooting the pairing
Possible errors during the setup process.
Location
On Android devices, you
must enable location services
when pairing Bluetooth
devices for the rst time.
After the initial setup you
can disable the location
services again.
Pairing fails
If the pairing fails, you can:
1. Tap Try again to
restart the pairing
process.
2. Close your app and start
over from the beginning.
Bluetooth - Android
Your mobile device Bluetooth
must be activated to pair
your Roger On. If you have
an Android device, you can
activate it by just tapping on
the button Activate now.
Bluetooth - iOS
Your mobile device Bluetooth
must be activated to pair
your Roger On. If you have
an iPhone, you can do this
by tapping on the button
Open settings.
Activate now Activate now Try again
Activate Bluetooth®
Bluetooth must be enabled to connect your
Roger On.
Open settings
Activate Bluetooth®
Bluetooth has to be enabled to connect your
Roger On.
Activate Location
Location services must be enabled to connect
your Roger On.
Pairing failed
7
Troubleshooting connection issues with Roger On device
Possible errors when connecting to your Roger On device.
Connection fails
If the myRogerMic app fails
to connect to your Roger On,
try connecting again after
checking:
• Roger On is turned on and
battery is not low or
depleted.
• Roger On is within range
of your Bluetooth mobile
device.
Connection fails -
Instructions
Tap the Why button to nd
out why the connection
failed and instructions on
what to do to establish the
connection.
No hearing aid detected
Your Roger On has not been
paired with your hearing
aid(s). Tap the Why button to
nd instructions on how to
pair your Roger On with your
hearing aid(s) or a Roger
receiver.
Got it
Roger On
Roger On Roger On
Roger On
Roger On connection failed
Why?
Retry
Roger On connection failed Why?
Roger On disconnected
No hearing aid detected Why?
Pair the Roger On with your
hearing aids or a Roger
receiver
It seems that your Roger On is not paired with
any hearing aids or Roger receiver. You need
to hold your Roger On close to your hearing
aids or receiver (10 cm) and press the
connect button on the back of your Roger On
to pair it with any of these devices.
Roger On disconnected
TableAuto PresenterPointing TableAuto PresenterPointing
Roger On connection
failed
The connection between the app and
the Roger On could not be established.
Please check that the Roger On is
charged, turned on and within range.
Retry
Close
8
Microphone mode functions*
Automatic mode
When Roger On is in
automatic mode, it will
adjust its microphone mode
dependent on how Roger
On is positioned. The
microphone mode is
displayed on the Roger On
mockup on the screen.
Lock microphone mode
Tap on the microphone mode
you wish to use. Your Roger
On is now locked in the
selected microphone mode.
Mute/unmute
You can mute and unmute
Roger On by pressing the
microphone icon.
Roger On Roger On
*To nd out more about the dierent microphone mode functions check the Roger On user guide.
Roger On
TableAuto PresenterPointing TableAuto PresenterPointing TableAuto PresenterPointing
Roger On Roger On Roger On
9
Beam steering
When Roger On is placed on a table, using MultiBeam Technology can improve speech intelligibility in noisy situations.1 For example, in a group
conversation at a restaurant, the speaker you actually hear may not be the speaker of interest. This can occur, if a side conversation starts at the
same table. In this case, the myRogerMic app allows you to change the beam in the direction of the speaker of interest.
Table mode
Place the Roger On device in
the center of the table. For a
better experience, make sure
that you place your Roger On
so that the charging port
points in your direction or in
the same position as shown
in the app.
Activate / Deactivate
beams
Tap on a segment to activate
/ deactivate that segment.
Activate all six beams at
once
You can activate all six
beams by tapping the circle
icon on the screen.
1 Thibodeau, L. (2020). Benets in Speech Recognition in Noise with Remote Wireless Microphones in Group Settings. J Am Acad Audiol. 31(6):404-411. doi: 10.3766/jaaa.19060.
Roger On Roger On
Comfort
Save as
Roger On Roger On
TableAuto PresenterPointing TableAuto PresenterPointing
10
Creating custom mode
When you often use a specic beam pattern, you can save it as a custom mode via the app. After that, you can access this beam pattern directly on
the Roger On device or with a single tap in the app. You can save up to two custom modes, access and delete them anytime.
Save custom mode
After you have selected the
beam pattern you use often,
tap the save icon to save it
as a custom mode. You can
save up to two custom
modes.
Name custom mode
You can give your beam
pattern a name you prefer
and then tap Save.
Access and delete custom
mode
The saved custom mode
appears as manual mode in
the microphone modes list.
You can delete the custom
mode by tapping on the
delete icon.
Accessing custom mode with
Roger On
You can also activate the custom
mode on Roger On. Repeatedly
press the function button on
Roger On until the custom mode
is enabled.
Custom 1
Roger On Roger On
Roger On Roger On
TableAuto PresenterPointing PointingTable Custom 1Presenter
Add your selected directions as a custom setting.
Save
Done
Cancel
Roger On
11
MultiBeam 2.0 Technology
When you have a pair of hearing devices manufactured by Sonova, with RogerDirect technology, you can enable MultiBeam 2.0. When you place the
Roger On device in the center of a table, MultiBeam 2.0 will allow you to hear which direction someone is talking from. You can only use this
feature in locked table mode.
Access the menu
Tap the three bars icon to
access the menu.
Enabling MultiBeam 2.0
Tap the MultiBeam 2.0 slider
to enable it. The setting is
now stored and your Roger
On will now enable Multi-
Beam 2.0 every time you
switch manually to table
mode.
Access the settings
Tap on Roger On settings.
Select Roger On
Tap on the arrow next to
the appropriate Roger On.
Using on the table
Place Roger On in the center of the
table and make sure that the charging
port points in your direction. Then lock
your Roger On in table mode using the
app or pressing the function button.
Roger On myRogerMic Configure your device
FAQ
App feedback
Send Send Add Roger
MultiBeam 2.0
Range Extender
Connected
Roger On settings
Roger On
TableAuto PresenterPointing
App instructions
Legal
Roger On
Roger On settings
Paired devices
Roger On
Roger On
Display name
With MultiBeam 2.0 you will hear from what direction
someone is talking when you place the Roger On in the
center of a table. For best results, make sure the USB port
of Roger On is facing you when placed on the table to
perceive correct spatialisation. MultiBeam 2.0 will be active
when you lock your Roger On in table mode. (Do not
activate MultiBeam 2.0 when using a single hearing aid).
Range Extender increases the wireless transmission
distance between your Roger On and your hearing device,
allowing you to hear sounds from further distances. Please
note that when you enable Range Extender the operating
time of your Roger On is reduced to approximately 6 hours.
Forget device
Front
Back
Left
Right
12
Add, select and remove your Roger On device(s)
Add a new Roger On
In the app main navigation,
go to the Roger On settings
page and tap on the Add
Roger button.
Remove a Roger On
In the Roger settings of the
main app navigation, select
the Roger On you want to
remove.
Tap on the Forget device icon
at the bottom of the page.
Select between multiple
devices
After completing the pairing
process, instructions on how
to select the Roger On you
want to use is displayed.
Select between multiple
devices
When more than one Roger
On is paired with the app, an
arrow appears on the home
screen. Tap on the arrow to
select the device you want to
control with the app.
Conrm removing a
Roger On
Tap on the Yes, forget
button to conrm that you
want to remove this Roger
On.
Roger On
Roger OnRoger On settings
Add Roger
Connected
Paired devices
Roger On
Select your device
Now that you have more than one Roger
On paired with your app, you can select
which one you want to display on the
screen by tapping on the arrow next to
the microphone name
Got it
Roger On
Roger On
Presenter
MultiBeam 2.0
Range Extender
Roger On
Display name
With MultiBeam 2.0 you will hear from what direction
someone is talking when you place the Roger On in the
center of a table. For best results, make sure the USB port
of Roger On is facing you when placed on the table to
perceive correct spatialisation. MultiBeam 2.0 will be active
when you lock your Roger On in table mode. (Do not
activate MultiBeam 2.0 when using a single hearing aid).
Range Extender increases the wireless transmission
distance between your Roger On and your hearing device,
allowing you to hear sounds from further distances. Please
note that when you enable Range Extender the operating
time of your Roger On is reduced to approximately 6 hours.
Forget device
Configure your device
Roger On
Display name
Please note that when this mode is activated, it increases
the battery consumption of your Roger device.
Forget device
Configure your device
Forget Roger device?
You will need to pair your Roger On again
in order to use it with the app
Yes, forget
Cancel
13
MultiTalker Network
3. Blocked Roger On
Your microphone is blocked, because another microphone
connected to yours is being used in standalone mode
(pointing or table, while in a MultiTalker Network and
unmuted). Tap on the Why button to understand how you
can unblock it.
1. MultiTalker Network
The app displays the auto-
matic presenter mode, when
your Roger On is connected
to another Roger micro-
phone.
2. Muted Roger On
Your microphone is muted, because you’re not using it in
presenter mode. Tap on the Why button to understand
why and how you can unmute it again.
Your Roger On microphone can be combined with other Roger microphones, e.g. Roger Table Mic II, to allow you to hear a bigger group or multiple distant talkers. Find
out how to connect another microphone to your Roger On in chapter 13 of the Roger On user guide.
When a Roger On device is used with other microphones in a MultiTalker Network, it automatically goes into presenter mode (1). When you place your Roger On on a
table or when you hold it in the hand, it will mute automatically. The app will automatically display your microphone as muted and provide instructions on how to
unmute again (2).
If you unmute your Roger On (long press on the function button in the center of the microphone), the other microphones connected with it (i.e., being in the same
MultiTalker Network) will block automatically. This will also be displayed in the myRogerMic app (3).
Forget devices
Roger On
Roger On Roger On
MultiTalker Network
Forget devices
MultiTalker Network
This Roger is muted Why?
Roger On
TableAuto PresenterPointing
Roger On
Roger On
TableAuto PresenterPointing
This Roger is muted
Why?
Roger On
This Roger is blocked Why?
Roger On
TableAuto PresenterPointing
Roger On
Roger On
This Roger is blocked
Why?
MultiTalker Network
Your Roger On is connected with another
Roger microphone and cannot be used in
pointing / table mode.
If you want to use one of your Roger On
in standalone mode, you can still do so by
pressing on the function button of your
Roger On, but be aware that this will lock
the other microphones.
Got it
MultiTalker Network
This Roger On is blocked because it is
connected to another Roger microphone
that is being used in standalone mode. If
you want to use again this Roger On, you
can still do so by pressing on the function
button of your Roger device.
Got it
14
Other functionalities
Range Extender
You can activate the Range
Extender feature in the
Roger On settings in the
app’s main navigation. This
feature allows you to hear
sounds from even further,
as it increases the wireless
transmission distance
between your Roger On
and hearing aids.
Name your Roger On
device
Select the Roger On you
want to name and tap on
the edit (pencil) icon to
rename.
FAQ
You can access the
frequently asked questions
on our external website
from this page.
FAQConfigure your device
Frequently asked questions
Please find the most common questions on
our website.
FAQ
Range Extender
Roger On
Display name
Range Extender increases the wireless transmission
distance between your Roger On and your hearing device,
allowing you to hear sounds from further distances. Please
note that when you enable Range Extender the operating
time of your Roger On is reduced to approximately 6 hours.
Configure your device
Roger On
Display name
MultiBeam 2.0
With MultiBeam 2.0 you will hear from what direction
someone is talking when you place the Roger On in the
center of a table. For best results, make sure the USB port
of Roger On is facing you when placed on the table to
perceive correct spatialisation. MultiBeam 2.0 will be active
when you lock your Roger On in table mode. (Do not
activate MultiBeam 2.0 when using a single hearing aid).
Forget device
Range Extender
Range Extender increases the wireless transmission
distance between your Roger On and your hearing device,
allowing you to hear sounds from further distances. Please
note that when you enable Range Extender the operating
time of your Roger On is reduced to approximately 6 hours.
MultiBeam 2.0
With MultiBeam 2.0 you will hear from what direction
someone is talking when you place the Roger On in the
center of a table. For best results, make sure the USB port
of Roger On is facing you when placed on the table to
perceive correct spatialisation. MultiBeam 2.0 will be active
when you lock your Roger On in table mode. (Do not
activate MultiBeam 2.0 when using a single hearing aid).
Forget device
15
Symbol explanation
This symbol indicates that it is important for the user to read and take
into account the relevant information in this user guide.
This symbol indicates that it is important for the user to pay attention
to the relevant warning notices in this user guide.
Important information for handling and product safety.
With the CE symbol, Sonova AG conrms that this Phonak product
meets the requirements of the Radio Equipment Directive 2014/53/EU.
CE mark applied 2020.
Important safety information
You have the responsibility of usage of the personal smartphone.
Please handle the smartphone and usage of the app carefully.
Changing microphone mode or using beam steering may reduce the
audibility of warning or safety relevant signals. This could result in
hazardous situations.
If the Roger On does not respond to the device because of an unusual
eld disturbance, move away from the disturbing eld.
If the Roger On does not respond, please check if the Roger On is
switched on, the battery is not empty and that it is in range of a
standard Bluetooth LE connection.
To obtain a free paper copy of the instructions of use, please contact
your local Sonova representative. A copy will be sent within 7 days.
Activate your Bluetooth. Bluetooth has to be enabled to connect to
your Roger On.
Do not activate the MultiBeam 2.0 feature, when you only use one
hearing aid. It may reduce the hearing performance of your hearing
aid.
Sonova AG · Laubisrütistrasse 28
CH-8712 Stäfa · Switzerland
www.phonak.com
V1.00/2021-01/cl © 2021 Sonova AG All rights reserved
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Phonak myRogerMic app Kasutusjuhend
- Tüüp
- Kasutusjuhend
- See juhend sobib ka
teistes keeltes
- English: Phonak myRogerMic app User guide
Muud dokumendid
-
SWITEL WT330 Omaniku manuaal
-
Klippo AB Excellent Selfstart Kasutusjuhend
-
Silvercrest SPMR 8000 A1 Kasutusjuhend
-
Denver WTA-446 Kasutusjuhend
-
Alecto DBX-82 Kasutusjuhend
-
Widex WPC101 Kasutusjuhend
-
-
Ingersoll-Rand KM750 toote info
-
Cochlear Wireless phone clip Kasutusjuhend
-
Jabra Talk 35 Kasutusjuhend
