Robot vacuum cleaner
User manual
SR10J50

Series
Before operating this unit, please read the instructions carefully.
For indoor use only.
1_VR5000_EN_00734G-00_SB.indd 1 2016-02-23 오후 3:54:01
2
English
Contents
Preparation
Safety information 3
Safety information 3
Important safety instructions 4
Installation
Installation 12
Accessories 13
Charging 14
Installing the virtual guard (Optional) 16
Part name of the virtual guard 17
Inserting batteries 17
Operations
Using the robot vacuum cleaner 18
Cleaning method for each mode 20
Using the remote control 21
Name of each part 25
Setting time/schedule 26
Setting the time 26
Setting the schedule 26
Maintenance
Cleaning and maintaining 27
Cleaning the dustbin 27
Emptying the dustbin (Quick Empty) 28
Cleaning the driving wheel 28
Cleaning the sensors and the camera 28
Cleaning the power brush 29
Cleaning the side brush 30
Appendices
Notes and cautions 31
Charging 31
In use 31
Cleaning and maintenance 33
About the battery 33
About the IrDA sensor 34
Information codes 35
Troubleshooting 36
Warnings about battery 38
How to remove the battery 38
Specications 40
1_VR5000_EN_00734G-00_SB.indd 2 2016-02-23 오후 3:54:01
3
Preparation
English
Safety information
WARNING
Before operating the appliance, please read this manual thoroughly and
retain it for your reference.
WARNING
Because these following operating instructions cover various models, the
characteristics of your vacuum cleaner may differ slightly from those
described in this manual.
Caution/Warning symbols used
WARNING
Indicates that a danger of death or serious injury exists.
CAUTION
Indicates that a risk of personal injury or material damage exists.
Other symbols used
NOTE
Indicates that the following text contains additional important information.
Safety information
Preparation
1_VR5000_EN_00734G-00_SB.indd 3 2016-02-23 오후 3:54:01
4
Preparation
English
Important safety instructions
When using an electrical appliance, basic precautions should be observed,
including the following:
Read all instrucrions before using your robot vacuum cleaner.
Unplug the charger (station) from outlet when not in use and before
conducting maintenance.
WARNING
To reduce the risk of re, electric shock, or injury:
General
Use only as described in this manual.
Do not operate the robot vacuum cleaner or charger (station) if it has
been damaged in any way.
If the robot vacuum cleaner is not working as it should, has been
dropped, damaged, left outdoors, or dropped in water, return it to a
customer care center.
Do not handle the charger (station) or robot vacuum cleaner with wet
hands.
Use only on dry, indoor surfaces.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
1_VR5000_EN_00734G-00_SB.indd 4 2016-02-23 오후 3:54:01
5
Preparation
English
BATTERY Charger (station)
Do not modify the polarized plug to t a non-polarized outlet or
extension cord.
Do not use outdoors or on wet surfaces.
Unplug the charger (station) from the outlet when not in use and before
servicing.
Use only the charger (station) supplied by the manufacturer to recharge.
Do not use with a damaged cord or plug or a loose power outlet.
Do not pull or carry by the cord, use the cord as a handle, close the door
on the cord, or pull the cord around sharp edges or corners. Keep the
cord away from heated surfaces.
Do not use extension cords or outlets with inadequate current carrying
capacity.
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the
cord.
Do not mutilate or incinerate batteries as they will explode at high
temperatures.
Do not attempt to open the charger (station). Repairs should only be
carried out by a qualied customer care center.
Do not expose the charger (station) to high temperatures or allow
moisture or humidity of any kind to come into contact with the charger
(station).
1_VR5000_EN_00734G-00_SB.indd 5 2016-02-23 오후 3:54:01
6
Preparation
English
Robot vacuum cleaner
Do not pick up hard or sharp objects such as glass, nails, screws, coins,
and etc.
Do not use without a lter in place. When servicing the unit, never put
ngers or other objects into the fan chamber in case the unit accidentally
turns on.
Do not put any objects into openings. Do not use with any openings
blocked; keep openings free of dust, lint, hair, and anything that may
reduce air ow.
Do not use to pick up toxic materials (chlorine bleach, ammonia, drain
cleaner, etc.).
Do not use to pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes.
Do not use to pick up ammable or combustible liquids such as gasoline,
nor use on areas where they may be present including:
Locations with candles or desk lamps on the oor.
Locations with unattended res (re or embers).
Locations with distilled alcohol, thinner, ashtrays with burning
cigarettes, etc.
Do not use the robot vacuum cleaner in an enclosed space lled with
vapours given off by oil based paint, paint thinner, moth proong
substances, ammable dust, or other explosive or toxic vapours.
Leaks from battery cells can occur under extreme usage or temperature
conditions.
If the liquid gets on skin, wash quickly with water. If the liquid gets into
the eyes, ush them immediately with clean water for a minimum of 10
minutes. Seek medical attention.
1_VR5000_EN_00734G-00_SB.indd 6 2016-02-23 오후 3:54:01
7
Preparation
English
WARNING
Power related
Please prevent any risk of electric shock or re.
Do not damage the power cord.
Do not pull the power cord too hard or touch the power plug with wet
hands.
Do not use a power source other than the national rated voltage and
also do not use a multi outlet to supply power to number of devices at
the same time.
Do not leave the power cord carelessly on the oor.
Do not use a damaged power plug, power cord or loose power outlet.
Clean dust or any foreign matters on the pin and contact part of the
power plug.
There is a risk of electric shock or malfunction.
For information on Samsung’s environmental commitments and product
specic regulatory obligations e.g. REACH visit: samsung.com/uk/
aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
Before use
Do not use the robot vacuum cleaner near combustible materials.
Places near candles, desktop lamps, replaces or near combustible
materials such as gasoline, alcohol, thinners etc.
The robot vacuum cleaner is intended for household use therefore do
not use it in an attic, basement, storage, industrial building, out of indoor
space, in places with moisture (such as bathroom, laundry), or on the
table or shelves.
The robot vacuum cleaner can be damaged or malfunction.
1_VR5000_EN_00734G-00_SB.indd 7 2016-02-23 오후 3:54:01
8
Preparation
English
Install the Virtual guard (option) in front of dangerous areas (such as
stairs or railings) to prevent damaging the product or getting injured.
For your safety, always keep the cliff sensor clean.
Be sure the robot vacuum cleaner does not pass through or touch any
kind of liquids.
The robot vacuum cleaner can be severely damaged and it may
contaminate other areas if the wheels pass through liquid.
Do not spill any liquids on the charger.
There is a risk of re or electric shock.
Do not use the charger for anything other than its intended purpose.
There is a risk of re or severe damage to the charger.
Always keep the cliff sensor clean for your safety.
In use
If any abnormal sounds, smells or smoke come from the robot vacuum
cleaner, immediately shut off the power switch at the bottom of the robot
vacuum cleaner and contact a service center.
Cleaning and maintenance
When the power cord is damaged, contact a service center to get it
replaced by certied repairman.
There is a risk of re or electric shock.
Please check with a Samsung Electronics service center when exchanging
batteries.
Using batteries from other products can cause malfunction.
1_VR5000_EN_00734G-00_SB.indd 8 2016-02-23 오후 3:54:01
9
Preparation
English
CAUTION
Before use
Insert the dustbin before using the robot vacuum cleaner.
Open room doors before cleaning in order to have all rooms cleaned
and install a Virtual guard (option) in front of entryways, balconies,
bathrooms, or other areas where the robot vacuum cleaner may fall.
Be careful with the followings for proper automatic recharging.
Always turn on the power of the charger.
Install the charger where the robot vacuum cleaner can easily nd.
Do not leave any object in front of the charger.
When installing the charger, do not leave the cord carelessly on the oor
since the robot vacuum cleaner may get tangled by it.
Do not use the robot vacuum cleaner on black colored oors.
The robot vacuum cleaner may not be able to operate normally.
Do not pick up the robot vacuum cleaner by the dustbin holder.
Do not place any objects within 0.5 m to both sides and 1 m to the front
of the charger.
Make sure the charger’s charging contact is not damaged or have any
foreign matters on it.
Do not install the charger in an area with a dark oor.
If the oor around the charger is dark, recharging is hindered.
Move any obstacles that may disturb the robot vacuum cleaners
movement (such as children’s indoor swing or slides) before cleaning.
1_VR5000_EN_00734G-00_SB.indd 9 2016-02-23 오후 3:54:01
10
Preparation
English
In use
Using the robot vacuum cleaner on thick carpet may damage both the
robot vacuum cleaner and the carpet.
The robot vacuum cleaner cannot pass over carpet that is thicker than 1
cm.
Do not use the robot vacuum cleaner on tables or other high surfaces.
There is a risk of damage if it falls.
The robot vacuum cleaner may bump into chair, desk legs therefore move
them away for faster and efcient cleaning.
When the robot vacuum cleaner is operating, do not lift it up or carry it
to another area.
Do not hold the robot vacuum cleaner by its driving wheels when
carrying it to another area.
Do not put any objects on top of the robot vacuum cleaner since it may
cause malfunction.
Remove any large papers or plastic bags from the oor before using the
robot vacuum cleaner since they may block the intake.
The robot vacuum cleaner may not be able to continue its operation if it
is stuck at entrances or veranda doorsills.
The robot vacuum cleaner stops operating for safety reasons if it cannot
move for more than 5 minutes.
To resume operating, turn the power switch off and then on again after
moving it to a location where it can continue cleaning.
Do not aim the red pointer directly at people or animals (optional).
1_VR5000_EN_00734G-00_SB.indd 10 2016-02-23 오후 3:54:01
11
Preparation
English
Cleaning and maintenance
Prevent any damage to the robot vacuum cleaner by complying the
followings.
Do not clean the robot vacuum cleaner by spraying water directly onto
it or use benzene, thinner, acetone or alcohol to clean it.
Do not disassemble or repair the robot vacuum cleaner yourself.
This should only be done by a certied repairman.
Always keep the obstacle sensor and cliff sensor clean.
If foreign matter accumulates, sensors may malfunction.
1_VR5000_EN_00734G-00_SB.indd 11 2016-02-23 오후 3:54:01
12
Installation
English
Installation
Power of the charger must be on at all times.
Install it in a place without
obstacles and danger of falling.
NOTE
Install the charger in a place where the oor and wall are level.
Install the charger along the grain of wooden oors.
If the power switch is off, the robot vacuum cleaner will not charge even if it is docked
on the charger.
Always turn on the power of the charger.
If power is not supplied to the charger, the robot vacuum cleaner cannot nd it and
cannot automatically recharge.
If the robot vacuum cleaner is left detached from the charger, the battery will drain
naturally.
If the robot vacuum cleaner is in energy-saving mode, power will not come on even if
the power switch is turned off and then on. Press and hold the Start/Stop button on the
robot vacuum cleaner.
Power lamp
(Red)
About 1 m
About 0.5 m
About 0.5 m
Installation
1_VR5000_EN_00734G-00_SB.indd 12 2016-02-23 오후 3:54:02
13
Installation
English
Accessories
Remote control (Option)
Batteries
[AAA type (Option)]
User manual
Spare lter (Option) Cleaning brush Virtual guard (Option)
1_VR5000_EN_00734G-00_SB.indd 13 2016-02-23 오후 3:54:03
14
Installation
English
Charging
It takes approximately 120minutes to completely charge when charging for the rst time
after purchase and can be used for approximately 90 minutes.
WARNING
Rated input voltage of this
product is 220 - 240 V
~
.
Charging lamp during charging (green)
1 Turn on the power switch on the
bottom.
You must turn on the power switch to turn
on the robot vacuum cleaner.
2 Manually charge the robot vacuum
cleaner by placing it on the charger.
Make sure the charge pins of the robot
vacuum cleaner and the charger is aligned.
3 Check the charging status.
” will turn on according to charging
progress and “FULL” will turn on when
charging is complete.
1_VR5000_EN_00734G-00_SB.indd 14 2016-02-23 오후 3:54:04
15
Installation
English
Automatic charging
When the battery indicator blinks during
cleaning, the robot vacuum cleaner will
return to the charger to charge itself
automatically.
Recharge
You can command the robot vacuum
cleaner to recharge at the charger while it
is in cleaning process.
Low battery (Lo)
Manually charge the robot vacuum cleaner
by placing it on the charger.
Steps to take if recharging is not being executed.
Check the installation status of the charger when:
the charger is located in a place where the robot vacuum cleaner cannot easily access.
distance between the charger and robot vacuum cleaner is over 5 m apart.
It may take a long time for the robot vacuum cleaner to return to the charger for
recharging.
Manually charge the robot vacuum cleaner when:
the charger is located in a corner.
battery is fully exhausted.
the robot vacuum cleaner is stuck by obstacles (furniture etc.).
the robot vacuum cleaner can’t climb threshold near charge. (Height of the threshold
that the robot vacuum cleaner can climb: about 1.5 cm and below)
when the battery indicator blinks and “Lo” is displayed.
when the robot vacuum cleaner is set on Spot clean or Manual clean mode.
1_VR5000_EN_00734G-00_SB.indd 15 2016-02-23 오후 3:54:04
16
Installation
English
Installing the virtual guard (Optional)
Infrared ray from the Virtual guard will restrict the robot vacuum cleaner from
approaching certain areas.
The distance of virtual wall is 2.5m at minimum and may differ depending on
surroundings and movement status of the robot vacuum cleaner.
Power lamp (Red) will blink.
1 Press the Power button to turn it on.
2 Install the Virtual guard where you
want to restrict the robot vacuum
cleaner’s entrance.
Make sure that the distance sensor is
facing in the desired direction you want
to create a invisible barrier (which will
restrict the robot vacuum cleaner’s
approach).
Virtual guard
Minimum 2.5m
1_VR5000_EN_00734G-00_SB.indd 16 2016-02-23 오후 3:54:04
17
Installation
English
Part name of the virtual guard
Power button
Power lamp
Power on: Red lamp blinks
Power off: Lamp is off
Robot vacuum cleaner detection sensor
Distance detection sensor (Infrared ray
sensor)
Battery cover
Inserting batteries
Batteries for the Virtual guard must be purchased separately.
1 Open the battery cover of the Virtual
guard by pressing the locking tab
and lift it up.
2 Insert the batteries (D type) as
shown in the illustration (check the
+, - polarity).
3 Insert the tip of the cover into the
slot and push the other end to close
the battery cover.
1_VR5000_EN_00734G-00_SB.indd 17 2016-02-23 오후 3:54:05
18
Operations
English
Using the robot vacuum cleaner
You must turn on the power switch before using the robot vacuum cleaner.
WARNING
When the robot vacuum
cleaner is not used for
10minutes, power will turn
off automatically.
Turning the power on/off
Turn on/off the power switch on
the bottom of the robot vacuum
cleaner.
Operations
Using auto clean mode
The robot vacuum cleaner moves and
cleans automatically until it cleans an
entire space once.
Stop cleaning: Press the
button
shortly
Using the cleaning modes
You can select the desired cleaning mode.
Recharge
You can command the robot vacuum
cleaner to recharge at the charger
automatically while it is in cleaning
process.
Setting schedule
You can set or cancel on-time or daily
schedule.
Refer to “Setting the schedule”.
1_VR5000_EN_00734G-00_SB.indd 18 2016-02-23 오후 3:54:05
19
Operations
English
Selecting cleaning mode
Cleaning mode How to select Displayed icon
Auto clean
Press once
Spot clean
Press twice
Max clean
Press 3 times
Manual clean
Press 4 times
Direction control can be done only by the
remote control.
Edge clean
Press 5 times
When the robot vacuum cleaner is being charged, you can only select the Auto clean, Max clean or
Edge clean mode.
1_VR5000_EN_00734G-00_SB.indd 19 2016-02-23 오후 3:54:06
20
Operations
English
Cleaning method for each mode
Auto clean
Cleans automatically
until an entire space
is cleaned once.
About 1.5 m
About 1.5 m
Spot clean
Cleans a localized
area intensely. It
can be used to clean
bread or cookie
crumbs.
Max clean
Cleans until the
battery is depleted.
Manual clean
You can move the
robot vacuum cleaner
with the remote
control to clean the
desired spot.
Edge clean
Cleans the corners by
reaching to them as
close as possible.
1_VR5000_EN_00734G-00_SB.indd 20 2016-02-23 오후 3:54:06
/