Jabra Speak 710 Kasutusjuhend

User manual

Speak 710

Jabra

trademark of GN Audio A/S. The Bluetooth® word mark and

logos are registered trademarks owned by the Bluetooth

SIG, Inc. and any use of such marks by GN Audio A/S is under

license.

Declaration of Conformity can be found on

www.jabra.com/CP/US/declarations-of-conformity

Designed and engineered in Denmark

Made in China

MODEL: PHS040W  END040W

3

ENGLISH

Jabra Speak 710

1. Welcome .........................................5

2. Overview ......................................... 6

3. Where To Position ........................7

3.1 Small Meeting Room

3.2 Large Meeting Room

3.3 Desk

3.4 Stereo Media

4. How To Charge ........................... 11

4.1 Usb Charging

4.2 Automatic Power O

4.3 Battery Status

5. How To Connect ........................ 13

5.1 Connect To Pc (Bluetooth)

5.2 Connect To Pc (Usb Cable)

5.3 Connect To Smartphone

6. How To Use ................................ 15

6.1 Button Visibility

6.2 Typical Use

6.3 Multiple Call Handling

6.4 Link Button

6.5 Smart Button

6.6 Voice Guidance

6.7 Shared Use

6.8 Factory Reset

4

ENGLISH

Jabra Speak 710

7. Software ...................................... 22

7.1 Jabra Direct

7.2 Update Firmware

8. Support ........................................ 24

8.1 Faq And Technical Speciﬁcations

8.2 How To Care For Your Jabra Device

5

ENGLISH

Jabra Speak 710

1. Welcome

Thank you for using the Jabra Speak 710.

We hope you will enjoy it!

Jabra Speak 710 features

• Immersive sound for calls and music

• Intuitive plug and play connectivity - connect

to laptop, smartphone and tablet via USB or

Bluetooth®

• Lightweight design, protective travel pouch,

and 15 hours of battery life

• Flexible and scalable for small and large

meetings

• Interact with your voice assistant with the

one touch Smart button

• Certified for Avaya, Cisco and Skype for

Business for a plug-and-play experience

6

ENGLISH

Jabra Speak 710

2. Overview

Power on/o

Answer call End call

Bluetooth

Link button

Volume up

Smart button

Mute

Battery status

Volume

down

jabra

USB cable Table stand

jabra

Jabra Link 370

7

ENGLISH

Jabra Speak 710

3. Where to position

3.1 Small meeting room

Position the speakerphone in the center of the

table, up to 2m/6ft from each participant. A

single Jabra Speak 710 is ideal for up to 6

people.

2m/6ft

8

ENGLISH

Jabra Speak 710

3.2 Large meeting room

For large meetings of up to 12 people in a

single room, position two Jabra Speak 710’s at

either end of the table to ensure all participants

in the meeting be heard clearly.

2m/6ft

To temporarily link the audio between two

Jabra Speak 710’s, press the Link button on

both speakerphones when they are within

2m/6ft.

jabra jabra

max 2 m/6 ft

9

ENGLISH

Jabra Speak 710

3.3 Desk

When using the Jabra Speak 710 at your desk it

is recommended to put the speakerphone into

an upright position using the table stand. This

will better direct the audio towards you.

10

ENGLISH

Jabra Speak 710

3.4 Stereo media

If you are presenting or viewing stereo

multimedia, two Jabra Speak 710’s can be

positioned on either side of a projector or

display for automatic stereo sound.

To temporarily link the audio between two

Jabra Speak 710’s, press the Link button on

both speakerphones when they are within

2m/6ft.

jabra jabra

max 2 m/6 ft

11

ENGLISH

Jabra Speak 710

4. How to charge

4.1 USB charging

Plug the Jabra Speak 710 into a USB power

source using the attached USB cable. The Jabra

Speak 710 battery lasts for up to 15 hours of

talk time and takes approx. 3 hours to fully

charge.

jabra

4.2 Automatic power o

To preserve battery while unplugged, the Jabra

Speak 710 will automatically power off when it

has not been connected to a bluetooth device

for 15 minutes.

If connected to a bluetooth device and

unplugged, it will automatically power off after

8 hours.

12

ENGLISH

Jabra Speak 710

4.3 Battery status

To view the current battery status, press the

Battery status button. The LEDs around the

edge of the Jabra Speak 710 will light up to

indicate the current battery status.

Medium battery

Low battery

13

ENGLISH

Jabra Speak 710

5. How to connect

5.1 Connect to PC (Bluetooth)

Plug the Jabra Link 370 into a USB port on your

PC. The Jabra Speak 710 and the Jabra Link 370

are pre-paired and ready to use out of the box.

The bluetooth range is 30m.

jabra

3 0m/100 ft

For the Jabra Speak 710 to work correctly you

may need to set the Jabra Link 370 as the

playback device in your operating system’s

audio settings.

To manually pair the Jabra Speak 710 with the

Jabra Link 370, please use Jabra Direct.

14

ENGLISH

Jabra Speak 710

5.2 Connect to PC (USB cable)

Plug the Jabra Speak 710 into a USB port on

your PC. You may need to set the Jabra Speak

710 as the playback device in your operating

system’s audio settings.

jabra

5.3 Connect to smartphone

Hold the Bluetooth button for 2 seconds and

follow the voice-guided instructions to pair to

your smartphone. The bluetooth range is 10m.

jabra

10 m/30 ft

To disconnect or reconnect, press the

Bluetooth button again.

15

ENGLISH

Jabra Speak 710

6. How to use

Power on/o

Answer call End call

Bluetooth

Link button

Volume up

Smart button

Mute

Battery status

Volume

down

6.1 Button visibility

The buttons are backlit and only visible when

the speakerphone is powered on. After 1

minute of inactivity the buttons will fade, and

can be reactivated by tapping the area where

the buttons are located.

The Smart button, Link button, and Mute

button will only be visible under certain

conditions (e.g. the Link button is only visible

when the Jabra Speak 710 is in close promixity

to another Jabra Speak 710).

16

ENGLISH

Jabra Speak 710

6.2 Typical use

WHAT HOW

Power on or o Hold (1 sec) the Power

button

Answer call Press the Answer call button

End or reject

call Press the End call button

Turn on/o

voice guidance

Hold (8 secs) the End call

button

Volume up/

down

Press (or hold) the Volume

up or Volume down button

Mute/unmute

microphone Press the Mute button

Battery status Press the Battery status

button

Connect

Bluetooth

device

Press the Bluetooth status

button

17

ENGLISH

Jabra Speak 710

WHAT HOW

Link two Jabra

Speak 710’s

Press the Link button (only

visible when within 2m/6ft

range of another Jabra Speak

710)

Voice assistant

(Smartphones)

Press the Smart button (only

visible when connected to a

smartphone)

Speed dial

(o by default)

Press the Smart button (use

Jabra Direct to enable speed

dial)

6.3 Multiple call handling

WHAT HOW

Put current call on hold

and answer incoming call

Press the Answer

call button

Switch between held call

and active call

Press the Answer

call button

Reject incoming call, and

continue current call

Press the End call

button

18

ENGLISH

Jabra Speak 710

6.4 Link button

To temporarily link the audio between two

Jabra Speak 710’s, press the Link button on

both speakerphones when they are within

2m/6ft. The Link button will only be visible

when two Jabra Speak 710’s are within 2m/6ft.

jabra jabra

max 2 m/6 ft

To unlink the speakerphones, press the Link

button on one of the speakerphones.

NOTE If two bluetooth devices are connected to the Jabra

Speak 710, the last connected Bluetooth device will be

replaced by the temporary link.

19

ENGLISH

Jabra Speak 710

6.5 Smart button

By default, the Smart button will activate your

smartphone’s voice assistant (Siri®, Google

Now™, Cortana™). However, if you would

prefer the Smart button to instead speed dial a

phone number on your Smartphone or PC, this

can be configured using Jabra Direct.

jabra

6.6 Voice guidance

The voice guidance can be turned on or off by

holding the End call button for 8 seconds.

jabra

20

ENGLISH

Jabra Speak 710

6.7 Shared use

If the Jabra Speak 710 is to be shared by many

users, it is recommended to enable Shared use

in Jabra Direct. When Shared use is enabled,

the speakerphone will not automatically

connect to a previously connected Smartphone

or Jabra Link 370.

To connect to a smartphone or Jabra Link 370,

press the Bluetooth button on the

speakerphone and follow the voice-guided

instructions.

NOTE When Shared mode is enabled, you will need to re-

pair to your smartphone or Jabra Link 370.

Leht laaditakse ...

Jabra Speak 710 Kasutusjuhend

Jabra Speak 710 Kasutusjuhend

teistes keeltes

Seotud paberid