Suite Mirror CKARA2432CCT-TS paigaldusjuhend

Tüüp
paigaldusjuhend
Suite Mirror
Part Number: CKARA2432CCT-TS
Cabinet KARA Installation Guide
This cabinet is suitable for installation in Zones 2 and 3 only.
Avoid Installation in Zone 1. See diagram above.
Please retain this document for future reference.
Handle with care! When unpacked, do not place cabinet upright
directly on a hard surface, such as tile floors. Always lay on a soft
surface.
1
Suite Mirror
Part Number: CKARA2432CCT-TS
Cabinet KARA Installation Guide
Bracket
2
Using a spirit level, mark off a
horizontal line and plug holes
on proper position of wall.
Drill the required holes to a
suitable depth.
Screw the bracket to the wall
by using the screws provided.
Hand the cabinet on the wall bracket. The claws on the cabinet
hangers must be securely located on the wall bracket. Connect
the wire to local power wire.
Suite Mirror
Part Number: CKARA2432CCT-TS
Cabinet KARA Installation Guide
.
3
Suite Mirror
Part Number: CKARA2432CCT-TS
Cabinet KARA Installation Guide
CAUTION: To avoid potential damages to the back of the cabinet, it is
highly recommended to use wire gauge less than 12mm in diameter.
4
Suite Mirror
Part Number: CKARA2432CCT-TS
Cabinet KARA Installation Guide
5
HOW TO USE THE TOUCH BUTTON
ON/OFF: Tap the touch button to turn on the light ON and OFF.
Color Temperature Change: When the light is on, short press the touch button within 4
seconds to change the color temperature from 3000K to 4000K to 6000K.
Dimming: When the light is on, press and hold the sensor button to dim the light.
The cabinet is equipped with a memory feature to preserve the previous color
temperature and brightness settings.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Suite Mirror CKARA2432CCT-TS paigaldusjuhend

Tüüp
paigaldusjuhend