Cisco Linksys WUSB100 ver. 2 Kasutusjuhend

USER GUIDE

RangePlus Wireless

Network USB Adapter

Model: WUSB100

About This Guide

i

RangePlus Wireless Network USB Adapter

About This Guide

Icon Descriptions

While reading through the User Guide you may see

various icons that call attention to specific items. Below is

a description of these icons:

NOTE: This check mark indicates that there is

a note of interest and is something that you

should pay special attention to while using the

product.

WARNING: This exclamation point indicates

that there is a caution or warning and it is

something that could damage your property or

product.

WEB: This globe icon indicates a noteworthy

website address or e-mail address.

Online Resources

Website addresses in this document are listed without

http:// in front of the address because most current web

browsers do not require it. If you use an older web browser,

you may have to add http:// in front of the web address.

Resource Website

Linksys www.linksys.com

Linksys International www.linksys.com/international

Glossary www.linksys.com/glossary

Network Security www.linksys.com/security

Copyright and Trademarks

Linksys is a registered trademark or

trademark of Cisco Systems, Inc. and/

or its affiliates in the U.S. and certain

Other brands and product names are

trademarks or registered trademarks

of their respective holders.

Table of Contents

ii

RangePlus Wireless Network USB Adapter

Chapter 1: Product Overview 1

LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Chapter 2: Wireless Security Checklist 2

General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 3: Advanced Conguration 3

How to Access the Wireless Network Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

How to Use the Wireless Network Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Link Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Proles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Access the Diagnostics Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

How to Use the Diagnostics Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Appendix A: Troubleshooting 15

Appendix B: Windows XP Wireless Zero Conguration 16

Windows XP Wireless Zero Conguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Appendix C: Specications 18

Appendix D: Warranty Information 19

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Exclusions and Limitations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Obtaining Warranty Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Appendix E: Regulatory Information 21

FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Avis d’Industrie Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Avis de non-responsabilité concernant les appareils sans l . . . . . . . . . . . . . . . . . .22

User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste

Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Appendix F: Software License Agreement 27

Software in Linksys Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Software Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Chapter 1

Product Overview

1

RangePlus Wireless Network USB Adapter

Chapter 1:

Product Overview

Thank you for choosing the Linksys RangePlus Wireless

Network USB Adapter. Using the latest wireless networking

technology, the Adapter adds or upgrades wireless

connectivity on your notebook computer. To help protect

your data and privacy, you can use industrial-strength

WPA2 encryption to protect your wireless connection. The

included Setup Wizard will walk you through configuring

the Adapter to your network’s settings, step by step.

LED

Link (Green) The LED flashes when there is

wireless network activity.

Chapter 2

Wireless Security Checklist

2

RangePlus Wireless Network USB Adapter

Chapter 2:

Wireless Security Checklist

Wireless networks are convenient and easy to install, so

homes with high-speed Internet access are adopting them

at a rapid pace. Because wireless networking operates by

sending information over radio waves, it can be more

vulnerable to intruders than a traditional wired network.

Like signals from your cellular or cordless phones, signals

from your wireless network can also be intercepted. Since

you cannot physically prevent someone from connecting

to your wireless network, you need to take some additional

steps to keep your network secure.

1. Change the default wireless

network name or SSID

Wireless devices have a default wireless network name

or Service Set Identifier (SSID) set by the factory. This

is the name of your wireless network, and can be up

to 32 characters in length. Linksys wireless products

use linksys as the default wireless network name. You

should change the wireless network name to something

unique to distinguish your wireless network from other

wireless networks that may exist around you, but do not

use personal information (such as your Social Security

number) because this information may be available for

anyone to see when browsing for wireless networks.

2. Change the default password

For wireless products such as access points and routers,

you will be asked for a password when you want to change

their settings. These devices have a default password set

by the factory. The Linksys default password is admin.

Hackers know these defaults and may try to use them

to access your wireless device and change your network

settings. To thwart any unauthorized changes, customize

the device’s password so it will be hard to guess.

3. Enable MAC address filtering

Linksys routers give you the ability to enable Media Access

Control (MAC) address filtering. The MAC address is a

unique series of numbers and letters assigned to every

networking device. With MAC address filtering enabled,

wireless network access is provided solely for wireless

devices with specific MAC addresses. For example, you can

specify the MAC address of each computer in your home

so that only those computers can access your wireless

network.

4. Enable encryption

Encryption protects data transmitted over a wireless

network. Wi-Fi Protected Access (WPA/WPA2) and Wired

Equivalency Privacy (WEP) offer different levels of security

for wireless communication.

A network encrypted with WPA/WPA2 is more secure

than a network encrypted with WEP, because WPA/WPA2

uses dynamic key encryption. To protect the information

as it passes over the airwaves, you should enable the

highest level of encryption supported by your network

equipment.

WEP is an older encryption standard and may be the

only option available on some older devices that do not

support WPA.

General Network Security Guidelines

Wireless network security is useless if the underlying

network is not secure.

Password protect all computers on the network and •

individually password protect sensitive files.

Change passwords on a regular basis. •

Install anti-virus software and personal firewall •

software.

Disable file sharing (peer-to-peer). Some applications •

may open file sharing without your consent and/or

knowledge.

Additional Security Tips

Keep wireless routers, access points, or gateways away •

from exterior walls and windows.

Turn wireless routers, access points, or gateways •

off when they are not being used (at night, during

vacations).

Use strong passphrases that are at least eight characters •

in length. Combine letters and numbers to avoid using

standard words that can be found in the dictionary.

WEB: For more information on wireless

security, visit www.linksys.com/security

Chapter 3

Configuration

3

RangePlus Wireless Network USB Adapter

Chapter 3:

Advanced Configuration

Advanced configuration is performed through the Wireless

Network Monitor (the Monitor). Use it to check the link

information, search for available wireless networks, or

create profiles that hold different configuration settings.

Diagnostics is performed through the Diagnostic utility.

Use it to detect the Adapter, test the driver and Monitor,

and troubleshoot if needed.

How to Access the Wireless Network

Monitor

After installing the Adapter, the Monitor icon appears in

the system tray of your computer. If the Monitor is enabled,

the icon is green. If the Monitor is disabled or the Adapter

is not inserted, the icon is gray.

Wireless Network Monitor Icon

Double-click the icon to open the Monitor.

How to Use the Wireless Network Monitor

The opening screen of the Monitor is the Link Information

screen. From this screen, you can find out how strong the

current wireless signal is and how good the connection’s

quality is. Click More Information to view additional

status information about the current connection. To search

for available wireless networks, click the Connect tab.

To perform configuration changes or create connection

profiles, click the Profiles tab.

Link Information

The Link Information screen displays network mode, signal

strength, and link quality information about the current

connection. Click More Information for additional status

information.

Link Information

Ad-Hoc Mode or Infrastructure Mode The screen

indicates whether the Adapter is currently working in ad-

hoc or infrastructure mode.

Signal Strength The Signal Strength bar indicates signal

strength.

Link Quality The Link Quality bar indicates the quality of

the wireless network connection.

Click More Information to view additional information

about the wireless network connection on the Wireless

Network Status screen.

Wireless Network Status

The Wireless Network Status screen provides information

on your current network settings.

Wireless Network Status

Radio Band This is the radio band used on the network.

Wireless Network Name This is the unique name (SSID)

of the wireless network.

Wireless Mode This is the mode of the wireless network

currently in use.

Chapter 3

Configuration

4

RangePlus Wireless Network USB Adapter

Wide Channel This is the Wireless-N primary channel

used with a 40 MHz radio band network.

Standard Channel This is the channel used by your

wireless network.

Security This is the status of the wireless security

feature.

Authentication This is your wireless network’s

authentication method.

Network Type This is the wireless network type.

IP Address This is the IP Address of the Adapter.

Subnet Mask This is the Adapter’s Subnet Mask.

Default Gateway This is the Default Gateway address.

DNS1 This is the DNS address of the Adapter.

MAC Address This is the MAC address of the wireless

network’s wireless router or access point.

Signal Strength The Signal Strength bar indicates the

signal strength.

Link Quality The Link Quality bar indicates the quality of

the wireless network connection.

Click Statistics to go to the Wireless Network Statistics

screen. Click Back to return to the initial Link Information

screen. Click Save to Profile to save the currently active

connection settings to a profile.

Wireless Network Statistics

The Wireless Networks Statistics screen provides statistics

on your current network settings.

Wireless Network Statistics

Transmit Rate This is the data transmission rate of

the current connection. (In Auto mode, the Adapter

dynamically shifts to the fastest data transmission rate at

any given time.)

Receive Rate This is the rate that the Adapter receives

data.

Packets Received This shows the packets that the

Adapter receives, in real time, after connecting to the

wireless network or after clicking Refresh.

Packets Transmitted This shows the packets that the

Adapter transmits, in real time, after connecting to the

wireless network or after clicking Refresh.

Bytes Received This shows the bytes that the Adapter

receives, in real time, after connecting to the wireless

network or after clicking Refresh.

Bytes Transmitted This shows the bytes that the Adapter

transmits, in real time, after connecting to the wireless

network or after clicking Refresh.

Driver Version This shows the Adapter’s driver version.

Noise Level This shows the level of background noise

that affects the wireless signal. A lower reading translates

into a higher quality signal.

Signal Strength This is the intensity of the wireless signal

that the Adapter receives.

Transmit Power This is the power output at which the

Adapter transmits.

Signal Strength The Signal Strength bar indicates the

signal strength.

Link Quality The Link Quality bar indicates the quality of

the wireless network connection.

Click Back to return to the initial Link Information

screen. Click Status to go to the Wireless Network Status

screen. Click Save to Profile to save the currently active

connection settings to a profile. Click Refresh to reset the

statistics.

Connect

The Connect screen displays a list of available networks

in the table on the left. The table shows each network’s

wireless network name, radio band, channel, and the

quality of the wireless signal the Adapter receives. You

may click Network Name, CH (Channel), or Signal, to sort

by that field.

Chapter 3

Configuration

5

RangePlus Wireless Network USB Adapter

Connect

Wireless Network Name This is the SSID or unique name

of the wireless network.

CH This is the channel that the network uses.

Signal This is the percentage of signal strength, from 0

to 100%.

Site Information

For each network selected, the following settings are

listed:

Wireless Mode This is the mode of the wireless network

currently in use.

Network Type This is the network type used by your

wireless network.

Radio Band This is the radio band used by your wireless

network.

Security This is the status of the wireless security

feature.

MAC Address This is the MAC address of the wireless

network’s wireless router or access point.

Refresh Click Refresh to perform a new search for

wireless devices.

Connect To connect to one of the networks on the list,

select the wireless network, and click Connect. If the

network’s wireless security is enabled, then you will view

this screen:

Click Continue

Make sure you have the security settings of your wireless

network, and then click Continue.

Proceed to the instructions for the wireless security screen

you see:

WEP (Wired Equivalent Privacy)

If the network has WEP encryption enabled, then you see

the WEP Key Needed for Connection screen.

WEP Security

WEP Select 64-bit or 128-bit encryption.

Passphrase Enter the network’s Passphrase, so a

WEP key is automatically generated. The passphrase is

case-sensitive and must be 16 or fewer alphanumeric

characters. It must match the passphrase of your other

wireless network devices and is compatible with Linksys

wireless products only. (For non-Linksys wireless products,

enter the WEP key manually.)

WEP Key 1 If you do not have the Passphrase, enter

the WEP key, which must match the WEP key of your

wireless network. For 64-bit encryption, enter exactly 10

hexadecimal characters (“0” to “9” and “A” to “F”.) For 128 -bit

encryption, enter exactly 26 hexadecimal characters.

To connect to the network, click Connect. To cancel the

connection, click Cancel.

Chapter 3

Configuration

6

RangePlus Wireless Network USB Adapter

WPA (Wi-Fi Protected Access)

If the network has WPA Personal security enabled, then

you see the WPA Personal Needed for Connection screen.

WPA-Personal Security

Encryption Select the type of algorithm you want to use,

TKIP or AES.

Pre-shared Key Enter the network’s Pre-shared Key of 8-

63 characters.

To connect to the network, click Connect. To cancel the

connection, click Cancel.

WPA2 (Wi-Fi Protected Access 2)

If the network has WPA2 Personal security enabled, then

you see the WPA2 Personal Needed for Connection screen.

WPA2-Personal Security

Pre-shared Key Enter the network’s Pre-shared Key of 8-

63 characters.

To connect to the network, click Connect. To cancel the

connection, click Cancel.

Profiles

The Profiles screen lets you save different configuration

profiles for different network setups. The table on the left

displays a list of available profiles with their profile names

and wireless network names.

Profiles

Profile This is the name of the profile.

Wireless Network Name This is the SSID or unique name

of the wireless network.

Profile Information

For each profile selected, the following are listed:

Wireless Network This is the type of wireless network

currently in use.

Wireless Mode This is the mode of the wireless network

currently in use.

Wide Channel This is the Wireless-N primary channel

used with a 40 MHz radio band network.

Standard Channel This is the channel used by your

wireless network.

Security This is the status of the wireless security.

Authentication This is the authentication setting for the

network.

Connect To connect to a wireless network using a specific

profile, select the profile, and click Connect.

New Click New to create a new profile. See the next

section, “Create a New Profile,” for instructions.

Edit Select the profile you want to change and click Edit.

Import Click Import to import a profile that is saved in

another location. Select the appropriate file, and click

Open.

Chapter 3

Configuration

7

RangePlus Wireless Network USB Adapter

Export Select the profile you want to save in a different

location, and click Export. Direct Windows to the

appropriate folder, and click Save.

Delete Select the profile you want to delete and click

Delete.

NOTE: If you want to export more than one

profile, you must export them one at a time.

Create a New Profile

The next screen is the Available Wireless Networks screen.

Available Wireless Networks

This screen provides two options for setting up the

Adapter.

Available Wireless Networks (For most users) Use this

option if you already have a network set up. The networks

available to this Adapter are listed on this screen. You

can choose one of these networks and click Connect

to connect to it. Click Refresh to update the Available

Wireless Networks list.

Advanced Setup If your network is not listed on this

screen, select Advanced Setup to set up the Adapter

manually. This method of setting up the Adapter is

intended for advanced users only.

The setup for each option is described, step by step, under

the appropriate heading on the following pages.

Available Wireless Networks

The available networks are listed in the table on the center

of the screen by Wireless Network Name. Select the wireless

network you wish to connect to and click Connect. (If you

do not see your network listed, click Refresh to bring the

list up again.) If the network uses wireless security, you will

need to configure security on the Adapter. If not, you will

be taken directly to the Congratulations screen.

If you have wireless security enabled on your network, 1.

continue to step 2. If you do not have wireless security

enabled, continue to step 3.

If the network’s wireless security is enabled, then you 2.

will view this screen:

Click Continue

Make sure you have the security settings of your wireless

network, and then click Continue.

Proceed to the instructions for the wireless security screen

you see:

WEP

If the network has WEP encryption enabled, then you see

the WEP Key Needed for Connection screen.

WEP Security

WEP Select 64-bit or 128-bit encryption.

Passphrase Enter the network’s Passphrase, so a

WEP key is automatically generated. The passphrase is

case-sensitive and must be 16 or fewer alphanumeric

characters. It must match the passphrase of your other

wireless network devices and is compatible with Linksys

wireless products only. (For non-Linksys wireless products,

enter the WEP key manually.)

Chapter 3

Configuration

8

RangePlus Wireless Network USB Adapter

WEP Key If you do not have the Passphrase, enter

the WEP key, which must match the WEP key of your

wireless network. For 64-bit encryption, enter exactly 10

hexadecimal characters (“0” to “9” and “A” to “F”.) For 128 -bit

encryption, enter exactly 26 hexadecimal characters.

Click Connect and proceed to step 3.

WPA Personal

If the network has WPA Personal security enabled, then

you see the WPA Personal Needed for Connection screen.

WPA-Personal Security

Encryption Select the type of algorithm you want to use,

TKIP or AES.

Pre-shared Key Enter the network’s Pre-shared Key of 8-

63 characters.

Click Connect and proceed to step 3.

WPA2 Personal

If the network has WPA2 Personal security enabled, then

you see the WPA2 Personal Needed for Connection screen.

WPA2-Personal Security

Pre-shared Key Enter the network’s Pre-shared Key of 8-

63 characters.

Click Connect and proceed to step 3.

After the profile installs, the 3. Congratulations screen

appears. Click Finish.

Congratulations

Congratulations! The profile is

successfully configured.

Advanced Setup

If your network is not listed with the available networks,

use Advanced Setup.

Available Wireless Networks

Click 1. Advanced Setup on the Available Wireless

Networks screen to set up the Adapter manually.

Chapter 3

Configuration

9

RangePlus Wireless Network USB Adapter

The 2. Network Settings screen appears.

Wireless Network

If your network has a router or other DHCP server, select

Obtain network settings automatically (DHCP).

If your network does not have a DHCP server or router,

select Specify network settings. Enter an IP Address,

Subnet Mask, Default Gateway, and DNS addresses

appropriate for your network. You must specify the

IP Address and Subnet Mask on this screen. If you are

unsure about the Default Gateway and DNS addresses,

leave these fields blank.

IP Address – This IP Address must be unique to

your network.

Subnet Mask – The Adapter’s Subnet Mask must be

the same as your wired network’s Subnet Mask.

Default Gateway – Enter the IP address of your

network’s Gateway.

DNS 1 and DNS 2 – Enter the DNS address of your

wired Ethernet network.

Click Next to continue, or click Back to return to the

previous screen.

The 3. Wireless Mode screen shows a choice of two

wireless modes.

Wireless Mode

Infrastructure Mode – Select this mode if you want

to connect to a wireless router or access point.

Ad-Hoc Mode – Select this mode if you want to

connect to another wireless device directly without

using a wireless router or access point.

Wireless Network Name – Enter a wireless network

name (SSID) that must be used for all devices in

your wireless network. It is case-sensitive and

should be a unique name to help prevent others

from entering your network.

Click Next to continue, or click Back to return to the

previous screen.

If you chose Infrastructure Mode, go to step 5 now. 4.

If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings

screen appears.

Ad-Hoc Mode Settings

Standard Channel – Select the correct channel

for your wireless network. If you are unsure about

which channel to use, keep the default, Auto.

Click Next to continue, or click Back to return to the

previous screen.

Chapter 3

Configuration

10

RangePlus Wireless Network USB Adapter

If your wireless network does not have wireless security, 5.

select Disabled and then click Next to continue.

Proceed to step 6.

Wireless Security

If your wireless network has wireless security, select

the method of security used: WEP, WPA Personal,

WPA2 Personal, WPA Enterprise, WPA2 Enterprise, or

RADIUS. WEP stands for Wired Equivalent Privacy, and

WPA stands for Wi-Fi Protected Access. WPA2 stands

for Wi-Fi Protected Access 2. WPA is a stronger security

method than WEP. WPA2 is a stronger security method

than WPA. RADIUS stands for Remote Authentication

Dial-In User Service. Click Next to continue, or click

Back to return to the previous screen.

Proceed to the section for your security method.

WEP

Make sure the settings you configure match the settings

of your wireless network.

WEP

WEP Select 64-bit or 128-bit encryption.

Passphrase Enter the network’s Passphrase, so a WEP

key is automatically generated. It is case-sensitive and

should not be longer than 16 alphanumeric characters.

This passphrase must match the passphrase of your other

wireless network devices and is compatible with Linksys

wireless products only. (If you have any non-Linksys

wireless products, enter the WEP key manually on those

products.)

WEP Key If you do not have the Passphrase, enter the

WEP key of your wireless network. For 64-bit encryption,

enter exactly 10 hexadecimal characters. For 128-bit

encryption, enter exactly 26 hexadecimal characters. Valid

hexadecimal characters are “0” to “9” and “A” to “F”.

Advanced Users

TX Key The default is 1. If your network’s wireless router

or access point uses transmit key number 2, 3, or 4, select

the appropriate number.

Authentication The default is Open System. For Open

System authentication, the sender and the recipient do

not share a WEP key for authentication. For Shared Key

authentication, both the sender and the recipient share a

WEP key for authentication.

Click Next to continue, or click Back to return to the

previous screen.

WPA Personal

WPA Personal offers two encryption methods, TKIP and

AES, with dynamic encryption keys.

WPA Personal

Encryption Select TKIP or AES.

Pre-shared Key Enter the network’s Pre-shared Key of

8-63 characters.

Click Next to continue, or click Back to return to the

previous screen.

Chapter 3

Configuration

11

RangePlus Wireless Network USB Adapter

WPA2 Personal

WPA2 Personal uses the encryption method, AES, with

dynamic encryption keys.

WPA2 Personal

Pre-shared Key Enter the network’s Pre-shared Key of

8-63 characters.

Click Next to continue, or click Back to return to the

previous screen.

WPA Enterprise

WPA Enterprise features WPA security used in coordination

with a RADIUS server. (This should only be used when a

RADIUS server is connected to the Router.) WPA Enterprise

offers two authentication methods, EAP-TLS and PEAP,

as well as two encryption methods, TKIP and AES, with

dynamic encryption keys.

Authentication Select the authentication method your

network is using, EAP-TLS or PEAP.

EAP-TLS

WPA Enterprise - EAP-TLS

If you selected EAP-TLS, configure the following:

Login Name Enter the login name of your wireless

network.

Server Name Enter the name of the authentication server

(this is optional).

Certificate Select the certificate you installed to

authenticate you on your wireless network.

Encryption Select the type of encryption, TKIP or AES.

Click Next to continue, or click Back to return to the

previous screen.

PEAP

WPA Enterprise - PEAP

If you selected PEAP, configure the following:

Login Name Enter the login name of your wireless

network.

Password Enter the password of your wireless network.

Server Name Enter the name of the authentication server

(this is optional).

Certificate Select the certificate you installed to

authenticate you on your wireless network. If you want to

use any certificate, keep the default, Trust Any.

Inner Authen. Select the authentication method used

inside the PEAP tunnel.

Encryption Select the type of encryption, TKIP or AES.

Click Next to continue, or click Back to return to the

previous screen.

WPA2 Enterprise

WPA2 Enterprise features WPA2 security used in

coordination with a RADIUS server. (This should only be

used when a RADIUS server is connected to the Router.)

WPA2 Enterprise offers two authentication methods, EAP-

TLS and PEAP.

Chapter 3

Configuration

12

RangePlus Wireless Network USB Adapter

Authentication Select the authentication method your

network is using, EAP-TLS or PEAP.

EAP-TLS

WPA2 Enterprise - EAP-TLS

If you selected EAP-TLS, configure the following:

Login Name Enter the login name of your wireless

network.

Server Name Enter the name of the authentication server

(this is optional).

Certificate Select the certificate you installed to

authenticate you on your wireless network.

Click Next to continue, or click Back to return to the

previous screen.

PEAP

WPA2 Enterprise - PEAP

If you selected PEAP, configure the following:

Login Name Enter the login name of your wireless

network.

Password Enter the password of your wireless network.

Server Name Enter the name of the authentication server

(this is optional).

Certificate Select the certificate you installed to

authenticate you on your wireless network. If you want to

use any certificate, keep the default, Trust Any.

Inner Authen. Select the authentication method used

inside the PEAP tunnel.

Click Next to continue, or click Back to return to the

previous screen.

RADIUS

RADIUS features use of a RADIUS server. (This should

only be used when a RADIUS server is connected to the

Router.) RADIUS offers two authentication types: EAP-TLS

and PEAP.

Authentication Select the authentication method your

network is using, EAP-TLS or PEAP.

EAP-TLS

RADIUS - EAP-TLS

If you selected EAP-TLS, configure the following:

Login Name Enter the login name of your wireless

network.

Server Name Enter the name of the authentication server

(this is optional).

Certificate Select the certificate you installed to

authenticate you on your wireless network.

Click Next to continue, or click Back to return to the

previous screen.

Chapter 3

Configuration

13

RangePlus Wireless Network USB Adapter

PEAP

RADIUS - PEAP

If you selected PEAP, configure the following:

Login Name Enter the login name of your wireless

network.

Password Enter the password of your wireless network.

Server Name Enter the name of the authentication server

(this is optional).

Certificate Select the certificate you installed to

authenticate you on your wireless network. If you want to

use any certificate, keep the default, Trust Any.

Inner Authen. Select the authentication method used

inside the PEAP tunnel.

Click Next to continue, or click Back to return to the

previous screen.

The 6. Confirm New Settings screen appears.

Confirm New Settings

To save the new settings, click Save. To edit the new

settings, click Back. To exit Advanced Setup through

the Monitor, click Exit.

The 7. Congratulations screen appears. Click Connect to

Network to implement the new settings immediately

and return to the Link Information screen. Click Return

to Profiles screen to keep the current settings active

and return to the Profiles screen.

Congratulations

Congratulations! The profile is

successfully configured.

How to Access the Diagnostics Utility

After installing the Adapter, the Diagnostic utility is

installed on your computer. Follow these instructions to

run the Diagnostics utility:

Click 1. Start.

Select 2. Programs.

Select 3. Linksys RangePlus Wireless USB Adapter.

Click 4. Diagnostic.

Run Diagnostics Utility

Chapter 3

Configuration

14

RangePlus Wireless Network USB Adapter

To uninstall the Diagnostics utility, click Uninstall. To open

the Monitor, click Wireless Network Monitor.

How to Use the Diagnostics Utility

After you run the Diagnostics utility, the results are

displayed.

Diagnostic Results - Passed

If the Adapter has passed all tests, then click Exit to close

the Diagnostics utility.

Diagnostic Results - Troubleshooting

If the Adapter fails a test, you have two choices.

To troubleshoot at a later time, click Fix it later. To

troubleshoot now, click Fix it now.

Appendix A

Troubleshooting

15

RangePlus Wireless Network USB Adapter

Appendix A:

Troubleshooting

Your computer does not recognize the Adapter.

Make sure that the Adapter is properly inserted into the

USB slot.

The Adapter does not work properly.

Remove the Adapter, and then reinsert it into the

computer’s USB slot.

Your computer cannot communicate with the other

computers linked via Ethernet in the Infrastructure

conguration.

Make sure that the computers are powered on.1.

Make sure that the Adapter is configured with the 2.

same Wireless Network Name (SSID) and wireless

security settings as the other wireless computers in

the Infrastructure configuration.

WEB: If your questions are not addressed here,

refer to the Linksys website, www.linksys.com

Appendix B

Windows XP Wireless Zero Configuration

16

RangePlus Wireless Network USB Adapter

Appendix B:

Windows XP Wireless Zero

Configuration

Windows XP Wireless Zero Configuration

If your computer is running Windows XP, then this choice

will be available. If you want to use Windows XP Wireless

Zero Configuration to control the Adapter, instead of

using the Wireless Network Monitor, then right-click the

Wireless Network Monitor icon, and select Use Windows

XP Wireless Configuration.

NOTE: If you have WPA2 wireless security, refer

to Update for Windows XP (KB893357) on the

microsoft.com website to be able to connect

correctly.

Wireless Network Monitor Icon

Use Windows XP Wireless Configuration

If you want to switch back to the Wireless Network Monitor,

right-click the Wireless Network Monitor icon, and select

Use Linksys Wireless Network Monitor.

Use Linksys Wireless Network Monitor

NOTE: For more information on Windows XP

Wireless Zero Configuration, refer to Windows

Help.

After installing the Adapter, the Windows XP Wireless 1.

Zero Configuration icon appears in your computer’s

system tray. Double-click the icon.

Windows XP Wireless Zero Configuration Icon

The screen that appears will show any available 2.

wireless network. Select the network you want. Click

Connect.

If your network does not have wireless security

enabled, go to step 3.

If your network does have wireless security enabled,

go to step 4.

NOTE: Steps 2 and 3 are for Windows XP with

Service Pack 2 installed.

Available Wireless Network

If your network does not have wireless security enabled, 3.

click Connect Anyway to connect the Adapter to your

network.

No Wireless Security

If your network uses WEP wireless security, enter the 4.

WEP Key in the Network Key and Confirm network key

fields. If your network uses WPA Personal wireless

security, enter the Passphrase in the Network Key and

Confirm network key fields. Click Connect.

Appendix B

Windows XP Wireless Zero Configuration

17

RangePlus Wireless Network USB Adapter

Wireless Security

NOTE: Windows XP Wireless Zero Configuration

does not support the use of a passphrase. Enter

the exact WEP key used by your wireless router

or access point.

Your wireless network will appear as Connected when 5.

your connection is active.

Wireless Network Connection

For more information about wireless networking on a

Windows XP computer, click Start > Help > Support.

Enter the keyword wireless in the field provided, and

press the Enter key.

Your computer is now connected to your

wireless network.

Leht laadib ...

Cisco Linksys WUSB100 ver. 2 Kasutusjuhend

See käsiraamat sobib ka

Cisco Linksys WUSB100 ver. 2 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid