standivarius /'a:vei/ - wireless ergonomic mouse
Features / specification
• Vertical mouse with neutral 'handshake' position
• T extured grip and rubber scroll wheel
• 6 button design: left, right, scroll and click, fwd, bwd, DPI
• 2 .4GHz with USB Nano receiver
• P lug and play – No drivers required
• O ptical tracking with DPI: 800/1200/1600
• W orking Voltage: 5V | Polling rate: 125Hz | Working Current: 500mA
AVE mouse can now be used within 10m range of Nano
receiver.
On the move?
Remove Nano receiver from computer and store in base of
the mouse. Move switch on underside of mouse from 'ON'
to 'OFF'
How to use:
- Insert AA battery in compartment with polarity as
indicated.
- Remove Nano receiver from base of mouse.
- Move switches on base of mouse to 'ON' and '1'.
- Plug Nano receiver into USB port on computer.
- Remove Nano receiver from computer and reinsert.
- Release Right-click and Left-click buttons after 3 seconds
to rebuild the connection.
DPI setting:
- Check switch on base of mouse is on '1'.
Lost connection?
- Move switch on base to 'OFF'
- Hold Right-click and Left-click buttons down as you move
switch on base to 'ON'.
The indicator light will flash once after shifting the DPI to
the first level, twice after shifting the DPI to the second level
etc. 3 levels 800/1200/1600 in total.
Caution:
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries
according to the local regulations.
Left click
Scroll wheel
Right click
DPI indicator light
DPI cycle
Backward
Forward
Power ON/OFF button
standivarius.com/v-i
-
1
