HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
5
Assembly
1
Positioning the chair frame
□
□
□
Place the swivel base (with rocker assembly) (B) on a flat, solid
surface. Make sure the rocker assembly is positioned all the way
into the base. It may have shifted or vibrated out during shipment.
Note the arrow labels on the "U" bar and the rocker assembly. Also
note the horseshoe shape of the rocker plate. Point the open end of
the horseshoe away from you. The arrows on the rocker assembly
should be pointing towards you. Set the chair frame (A) on the rocker
assembly (B) with front of the seat facing you and the arrows on the
"U" bar pointing towards you as shown in the diagram.
If chair frame has been properly positioned on the rocker assembly,
all arrows on the "U" bar and rocker assembly will be pointing in the
same direction.
2
Attaching the chair frame to the chair base
□
□
□
Critical Step: The “U” metal plates must be installed in the proper
location.Read this step and carefully examine.
Insert the “U” metal plate so that the "U" bar and
rocker plate are between both sides of the “U” metal plate. Make sure
that the holes in the “U” metal plate are completely aligned with the
holes in the "U" bar as shown in .
Guide the bolts (AA) through the holes on the top side of the “U” metal
plate, through the holes in the "U" bar portion of the chair, through the
holes in the rocker plate and then, most importantly, through the holes
in the bottom side of the “U” metal plate. It is very important that the
holes in the bottom of the “U” metal plate are placed directly beneath
the holes in the rocker plate. Add a spring washer (BB) and a nut (DD)
to each bolt (AA) as shown in the diagram.
"U"BAR
"U"BAR
ROCKER
ASSEMBLY
ROCKER PLATE
EE
AA
BB
DD
EE
CC
B
A
COVER
FOOT CAP