13
Move the lower hinge part to the left side
and attach it with the special flange
self-tapping screws. Place the adjustable
bottom feet parts to the other side and attach
them.
Transfer the lower door to the proper position,
adjust the lower hinge part, place the hinge
axis into the lower hole of the lower door, then
tighten the bolts.
Transfer the upper hinge part and place the
upper hinge axis into the upper hole of the
upper door, and adjust the position of the
upper door (please support the upper door
with your hand when doing it), fix the upper
hinge part with the special flange self-tapping
screws.
Turn the middle hinge part upwards 180
degrees, adjust its position, change the
spacer on the axis to the lower side, place
the middle hinge axis into the upper hole of
the lower door, tighten the bolts.
Make sure the door is level, place
the middle hinge axis into the lower hole of
the upper door.