YukiHalu CLFC-01 Kasutusjuhend

Rematch signal between remoter and receiver

Step 1: power on the receiver (120V/60HZ ON)

Step 2: push “ stop” and “8H” button at same time.

Keep push the two button for 3 seconds, after the

indicator lamp change the brightness (became dark)

and then both release.

Step 3: push “ LIGHT ON/OFF” key quickly several

times, if the light can on/off, match finished.

Step 4: if light can not on/off, repeat step1 to step3

Note: all operate should be finished in 60 seconds

after power on

See käsiraamat sobib ka

Laadige alla PDF