RF Dual Color Remote Controller 09.2839C2.04225
Operation
Pair with RF receivers:
Click “RF Code Key”
on RF receiver
Function introduction
Important: Read All Instructions Prior to Installation
Output RF signal
Operation Frequency 868/915/434MHz
Operating temperature 0-40°C
Relative humidity 8% to 80%
Dimensions 120x48x17.6mm
Front side
Back side
• Control 1 zone of RF receiver
• CCT color controller
• Compatible with universal serie RF receiver
• 1 receiver can be paired by max 8 different remote controls.
• Waterproof grade: IP20
Product Data
Safety & Warnings
Power Supply 4.5V(3xAAA battery)
LED lights connected with the
RF receiver will flicker once
Press and hold down to decrease
light intensity
Click to turn on
The receiver is paired with
the remote successfully.
Turn on
the remote
Touch the
color wheel
How to delete the pairing:
Press and hold down on the receiver for over 3 seconds until connected LED lights flicker twice,
which means the pairing is deleted successfully.
“RF Code Key”
Click to turn off
CCT color wheel, touch to select
color temperature
Press and hold down to save color,
click to recall the saved. Each zone
can save 2 colors.
50% brightness
Press and hold down to increase
light intensity
LED indicator
4.5V(3xAAA battery)
Play the remote after pairing:
Turn on
the remote
Touch color wheel or click other
buttons to do the controlling.
• This device contains AAA batteries that shall be stored and disposed properly.
• DO NOT expose the device to moisture.
S1 S2
25% brightness
100% brightness75% brightness
If you use multiple receivers, you can have all the receivers in the same zone
Lear ning Ke y
RF LED Rec eiv er
1 Zone RF remote
Lear ning Ke y
RF LED Rec eiv er