ENGLISH
Ver. 20230605
Track Light Art.no 36-9285 Model OCL-0697R MSW1
36-9288 OCL-0697R MSB1
36-9286 OCL-1138R MSW1
H H
G
I
EE
D
F
Safety
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright for any
errors in text or images and any necessary changes made to
technical data. If you have any questions concerning technical
problems please contact our Customer Services.
Warning:
• All light fittings must be installed in accordance with current
safety regulations to prevent life-threatening accidents.
• This light fitting must only be installed by aqualified
electrician. Contact your local authorities if you are unsure.
Installation
A. Power connector (sold separately)
B. Circuit track
C. End cap
D. Protective Earth
E. Busbar
F. Polarity groove
G. Earth pin
H. Live and Neutral pins
I. Prong: Slots into thepolarity groove.
1. Warning: Turn off thepower before beginning
theinstallation.
2. Mount thecircuit track (B) onto theceiling using suitable
fasteners. Ensure that there are no electrical wires or water
pipes in theceiling where you intend to drill/screw.
3. Slide thepower connector (A) into thetrack (B). Make sure
that thepins are aligned correctly by slotting theprong on
thepower connector into thepolarity groove on thetrack
(F). Lock thepower connector in place using thescrew.
4. Multiple pieces of circuit track can be joined together using
track connectors (sold separately).
5. Slide in theend cap (C) and screw it in place.
6. Connect thetrack to thepower supply.
7. Slide thebase of thelamp into
thealuminium track.
8. Make sure that thepins are aligned
correctly by slotting theprong on
thebase of thelamp into thepolarity
groove on thetrack (F).
9. Turn thelatch on thebase of thelamp to
lock it in place. The position of thelamp
can be altered by undoing thelatch and
sliding thelamp along thetrack.
10. Turn thepower on.
Care and maintenance
• The light fitting should be cleaned using adry cloth or
vacuum cleaner.
• Thebulb in this lamp is not replaceable. Whenthebulb
reaches theend of its life thewhole lamp must be repla-
ced.
Responsible disposal
This symbol indicates that theproduct should
not be disposed of with general household
waste. This applies throughout theentire EU. In
order to prevent any harm to theenvironment
or health hazards caused by incorrect waste
disposal, theproduct must be handed in for
recycling so that thematerial can be disposed
of in aresponsible manner. When recycling theproduct,
take it to your local collection facility or contact theplace of
purchase. They will ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Rated voltage 220–240 V AC, 50 Hz
Light bulbs LED (non-replaceable)
Art.no 36-9289 Model OCL-1138R MSB1
36-9287 OTL-45 Set-A WH
36-9290 OTL-45 Set-A BK