ENGLISH
Ver. 20231106
Sputnik Ceiling Light Art.no 36-8962 Model OCL-1106P
36-8963 OCL1106P MBK1
Please read theentire instruction manual before use and
then save it for future reference. We reserve theright for
any errors in text or images and any necessary changes
made to technicaldata. Intheevent of technical problems
or other queries, please contact our Customer Services.
Safety
Warning:
• All light fittings must be installed in accordance
with current safety regulations to prevent life-
threatening accidents.
• Theinstallation of this light fitting must only be
performed by someone with thenecessary
knowledge of electrical wiring.
• In certain countries light fittings must only be
installed by aqualified electrician. Contact your
local authorities if you are unsure.
Installation
Information
Theprocedures for installing light fittings on ceilings
can vary from country to country.
4. Push in or pull out theelectric cable from theceiling
cup to adjust thedistance from thelight to
theceiling. Fasten thecable to theceilingcup.
Risk of electricshock: Always
disconnect thepower before beginning
any installation.
This product is intended for indoor
useonly.
Product description
• Chandelier light fitting designed for hanging
from theceiling.
• Supply voltage: 230V.
• Lamp base: E27
• Bulbs: 6×E27, max 30W (sold separately)
• Adjustablearms.
• Adjustable height from theceiling.
Preparations
Make sure that you have aceiling hook to attach
thelight fittingto.
• If your ceiling has alamp socket with aceiling
hook, thelight fitting can be hung onthat.
• If your ceiling has no pre-installed hook you should fit
ahook capable of supporting theweight of thelight
fitting to theceiling using anappropriate method of
fasteningit. Ensure that there are no electrical wires
or water pipes in theceiling where you intend to drill/
screw.
1. Turn off thepower before
beginning theinstallation.
2. Loosen theceiling cup’s strain relief screw and
slide thecup down along thecable to allow easy
access to theterminalblock.
3. Connect thelight fitting to themains according
to one of thebelow alternatives:
Lamp lead
with plug (sold
separately)
which plugs into
aceiling-mounted
lamp socket.
Power supply
cable protruding
from theceiling.
5. Hang up thelight on
theceilinghook.
6. Push up theceiling cup until it reaches
theceiling, fasten it into thecorrect position by
tightening thestrain relief screw.
7. Screw thelight bulbs (sold separately) into
thelight sockets on thelamp holders.
8. Turn thepoweron.
Care and maintenance
• Always unplug thelight and let thebulb cool
before cleaning thelight or changing thebulb.
• Thelight fitting should be cleaned using adry
cloth or vacuum cleaner.
Responsible disposal
Instructions foruse
Thearms of thechandelier
are fastened two-and-
two on arms which can
be turned individually
to direct thelight of
thechandelier as
youwish.
This symbol indicates that this
product should not be disposed
of with general householdwaste.
Thisapplies throughout theentire
EU. Inorder to prevent any harm to
theenvironment or health hazards
caused by incorrect waste disposal,
theproduct must be handed in for
recycling so that thematerial can
be disposed of in aresponsible
manner. Whenrecycling theproduct,
take it to your local collection facility
or contact theplace of purchase.
Theywill ensure that theproduct is
disposed of in anenvironmentally
sound manner.
Specifications
Rated voltage 220–240 V AC, 50 Hz
Lamp base E27
Bulb type 6×E27, max 30W
(sold separately)
Cable length Approx. 1.2m
Size Approx. 65cm in diameter