ANKO 43115785 Kasutusjuhend

43115785
Bränd
ANKO
Mudel
43115785
Kategooria
Isiklikud kaalud
Tüüp
Kasutusjuhend
DIGITAL
BATHROOM SCALES
INSTRUCTIONS FOR USE
9. If there is error on display or can not turn off the scale for a long time,
please take off the battery for about 3 seconds, then install it again to
remove soft-fault. If you can not resolve the problem, please contact
your dealer for consultation.
10. Do not use it for commercial purpose.
MODEL NO.:43115785
ADVICE FOR USE & CARE
1. The platform will be slippery when it is wet. Keep it dry!
2. Keep standing still during the course of weighing.
3. DO NOT strike, shock or drop the scale.
4. Treat the scale with care as it is a precise instrument.
5. Clean the scale with a damp cloth and avoid water getting inside the scale.
DO NOT use chemical/abrasive cleaning agents.
6. Keep the scale in cool place with dry air.
7. Always keep your scale in horizontal position.
8. If failed to turn on the scale, check whether battery is installed, or battery
power is low. Insert or replace new battery.
LOW BATTERY INDICATION
Battery power is low. Please install new battery.
Scale overload. (max. weight capacity is
indicated on the scale).
Please step off to avoid damage.
OVERLOAD INDICATION
RE-TEST
Display " " when you step off the scale, means
this weight reading with error. Please re-test.
TO CONVERT WEIGHT UNIT
If the scale is with both measuring system of Metric(kilograms) and
Imperial (pounds, stones), you can convert weight unit as follow:
BATTERY
TO REPLACE BATTERY
kg
kg
Step 2:
Gently step on the scale, then the scale
will be automatically turned on. Stand
evenly on the scale without moving and
wait until your weight shown on display
is stable and locked.
picture
Open battery case cover on the
back of scale, if battery case is the
type shown in picture,
A. Take out the used batteries.
B. Install new battery by putting one side of the
battery and then pressing down the other side.
Please take note to the polarity.
OPERATION
1.5V AAA batteries (Not included)
Step 1:
To make sure accuracy, place the
scale on a hard, flat floor and avoid
carpet or soft surface.
Remark: If the scale is one of our "slim" series
(indicated on package), make sure to put it on
hard surface such as marble, floor tile etc., and
make sure no foreign bodies beneath the scale
before weighing.
AUTOMATIC SWITCH OFF
When you step off the scale, it will automatically
switch off. Auto shut-off occurs if display shows
stable weight reading for approximate 8 seconds.
Unit button
if the unit switch is on the back of
the scale,
A. Find unit switch on the back of scale.
B. Press the unit conversion button when scale
is power on, LCD shows current weight unit.
Press the button again to convert weight unit.
  • Page 1 1
  • Page 2 2

ANKO 43115785 Kasutusjuhend

43115785
Bränd
ANKO
Mudel
43115785
Kategooria
Isiklikud kaalud
Tüüp
Kasutusjuhend
Laadige alla PDF
aruanne

teistes keeltes

Seotud paberid

Muud dokumendid