Welland T9 Kasutusjuhend

Kategooria
Isiklikud kaalud
Tüüp
Kasutusjuhend
Smart Body fat scale
Instruction Manual
Scan the corresponding QR Code to download APP
Thanks for choosing Smart body Scale. This fully body composition scale can help you conveniently
measure body weight, Body balance, BMI, Body fat rate, Visceral fat, Body water, Skeletal muscle rate,
Muscle mass, bone mass, Protein, BMR, Body age,Heart rate, Heart Index and etc;
IMPORTANT: Please read these instructions in this manual carefully before using the device. Failure
to comply with the instructions given in the manual or using this scale in ways other than the ones
mentioned in this manual may result in injury to yourself or damage to the scale.
(Onfit APP functions)
Weight Body fat Visceral fat Protein amount BMI
Muscle weight Bone mass Moisture BME Degree of obesity
Body age Muscle Standard weight Without fat BFR
Protein rate Subcutaneous fat Temperature Height record (<16 years old)
Heart rate Heart Index
INDICATION SYMBOLS
LO
Low battery - please change the batteries (3x1.5V AAA battery).
Err
Overload
C
An error has occurred during measurement. Step off the scales and step onto
them again to repeat the measuring process.
WHATS IN THE PACKAGE
1 X Smart body fat scale
3 X AAA batteries
1 X User manual
WARNING
DO NOT use with medical implants such as pacemakers.
DO NOT stand on the edge of the scale or jump on it;
DO NOT overload the scale(Max.180kg)
DO NOT drop scale or droop and objects on it as this may
damage the sensors.
DO NOT immerse the scale in water or use chemical cleaning agents. Clean the
scale with slightly damp cloth.
Not recommended for pregnant women.
Not recommended for infants, toddlers, and children under 10 years of age.
Any measurement obtained using this device is for reference only and should not
be considered as a medical opinion.
Consult your primary care doctor or physician before making changes to your
diet, exercise plan or physical activities.
Always place the scale on a hard, dry and flat surface before measurement.
Make sure your feet are dry before stepping on the scale.
Connect the batteries in accordance with the correct polarities indicated.
Remove batteries if the scale is not be use for a prolonged period of time.
SPECIFICATION
Product size: 290x290x20mm
Weight unit:kg
Weight limit: 6kg-180kg
Power Supply: 3xAAA batteries
Account number: No limitation (each account can add 24 persons)
Baby mode: Allow you to scale the weight of baby
Height record: Allow you to record the height info under 16 years old
Operating temperature: 10-400C
Operation humidity: 20%-90%
Support Devices:
iOS 8.0 or higher
Android 6.0 or higher
Install Onfit App
1. Seach Onfit in Apple Store or Google Play or scan the QR Code below:
3
2. Download and install the App on your device.
3. The App icon will appear on your phone or tablet after the installation is completed.
HOW TO USE FITDAYS APP
1. Insert 3xAAA batteries which included in the package to the battery holder on the
back at the back of the scale. Place the scale on the hard, flat ground.
2. Turn on the Bluetooth on your smart phone or tablet.
3. Register your own ID by email or social media account.
X
4. Add personal data and confirm OK;
Note: Enter the wrong gender, age, height, or corporeal level may result in measurement
being inaccurate.
5. Pair the scale through Bluetooth. Click ----> Device find the scale Yologram
now your phone is connected with the scale;
6. Tap your foot on the scales to activate the display. Wait until the display shows
0.0kg.
7. Step on the scale with BARE feet to turn the scale on.
Note:
If stepping on the scale with socks, only weight and BMI will be measured and displayed
on the main page. To get complete data, please step on the scale with bare feet.
8. The number on the display is flashing when the scale is weighing and analyzing, keep
stand still on the scale, till it finish showing 0000, your phone has received all the
data from the scale.
X
9. You can find the analyzing report on Body Weight, BMI, BFR, Muscle, Bone Mass etc.
(see full details on page 1 RECORDED PARAMETERS). When you click chart, you can see
your long-term track chat form.
10. Add, switch user by click or click --> Manage users, then add personal data.
The Smart Scale can recognize which user is step on it and remind user to switch the
correct user. Each account can support 24users;
11, Weighing baby: slide -->Baby Mode. Step on the scale by you own, after scale scale
gets your weight, and then hold the baby to get the weight of baby.
11. Select user with under age of 16, slide -->height to manual add the height record.
TROUBLE SHOOTING GUIDE
1. Bluetooth not connected
The scale and smart phone must be both have Bluetooth on.
For Android version, you need to allow location permission for the APP;
Need to open the APP during using the scale;
The scale should be with the connection icon showing on the display;
Check the iOS version of your smart phone, it must be iOS 8.0 or
higher/Android 6.0 higher.
Click ---> Device---> + or ---> Setting---> My device---> + to find the scale
My_scale.
2. No body fat data measured when weighing
User must be bare foot to measure the body fat.
Make sure your feet and the scale are both dry.
Scale not finishing weighing when the number display is flashing (Keep standing on
the scale around 10 second until the number on the display stops flashing).
Bluetooth is not turned on.
Bluetooth is paired with a difference scale.
Try to add some water onto the feet bottom once the feet is too dry;
When one scale be connected to more than 2 phone device, need to make sure the
devices which are not for using be turn off first;
3. The scale is producing inconsistent weight.
Check whether the scale is on a hard, flat surface.
Check each sensor foot on the back to make sure nothing is stuck to the bottom of it.
Remove the batteries to restart the scale;
4. The App is display the incorrect fat-muscle ratio
The body parameter setting is incorrect, check to make sure you entered the correct
gender, height, and age.
5. How do I re-calibrate the scale after moving it or change the batteries?
Step on the scale to turn it on. Let it automatically drop to 0.0kg to calibrate.
6. The scale does not turn on
Remove the batteries and put it back. Make sure to insert the batteries in the correct
direction;
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Welland T9 Kasutusjuhend

Kategooria
Isiklikud kaalud
Tüüp
Kasutusjuhend

teistes keeltes