Rena Systems Envelope Imager CS Driver Installation Instructions

Bränd
Rena Systems
Mudel
Envelope Imager CS
Tüüp
Driver Installation Instructions
Driver Installation Instructions Rev. 6-4-07
1
RENA Envelope Imager CS Driver Installation Instructions
Installing the Printer Driver
Please be sure to follow the procedure as described below.
1. Place the “Driver CD”, supplied with the printer, in your CD-ROM drive.
2. Connect the printer to the computer via the
port you wish to use (USB or Parallel) and
then turn the printer ON. After a little
while, the “Welcome to the Found New
Hardware wizard” will open on the
computer screen.
If prompted with “Can Windows connect
to Windows Update to search for
software?” Click on the “No, not this
time” and then click on NEXT>.
3. When prompted with “What do you want
the wizard to do?”, Click on the “Install
from a list or specific location
(Advanced)” and then click on NEXT>.
4. When prompted with “Please choose your
search and installation options.”, select
“Don’t search. I will choose the driver to
install.”. Then Click on NEXT>.
Driver Installation Instructions Rev. 6-4-07
2
5. When prompted to “Select a hardware
type, and click Next.”, scroll down the
list and select “Printers”. Then Click on
NEXT>.
6. When the “Add Printer Wizard”
window appears; Click on the “Have
Disk…” button.
7. When the “Install From Disk” window
opens; Click on the “Browse…” button.
Driver Installation Instructions Rev. 6-4-07
3
8. Locate the “Printer Drivers” folder on
the “CS Driver CD”, which you
previously placed in your CD-ROM
drive.
Then select the file “spf800k”.
Click on the “Open” button.
9. When the “Install From Disk” window
appears; Click on the “OK” button.
10. The “ENVELOPE IMAGER CS” will
appear in the window.
Click on Next>.
Driver Installation Instructions Rev. 6-4-07
4
11. If the “Update Driver Warning” box appears, asking if you want to continue installing this
driver; Click on the “Yes” button.
12. After a few moments a warning window
will appear, to inform you that “The
software you are installing for this
hardware has not passed Windows Logo
testing…”.
Click on the “Continue Anyway” button.
13. Once the files are finished copying to your computer, you will be presented with the following
screen. Click on the “Finish” button.
14. The installation is complete when the
“Found New Hardware” box appears in
the lower right-hand corner of your
screen.
RENA SYSTEMS INC.
136 Green Tree Road STE 140
Oaks, PA 19456-1069
Phone: (610) 650-9170
Fax: (610) 650-9171
E-Mail: [email protected]
Web Site: www.renausa.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Rena Systems Envelope Imager CS Driver Installation Instructions

Bränd
Rena Systems
Mudel
Envelope Imager CS
Tüüp
Driver Installation Instructions
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid