WaterWay 810-0190 Kasutusjuhend

CHAMPION / PROCLEAN MANIFOLD INSTALLATION

1. Install threaded union adapters on inlet to ﬁlter and discharge

(top) of pump, using Teﬂon tape supplied. Use four wraps of the

Teﬂon tape on adapter for proper seal.

2. Make sure “rib” on gasket is seated into the slot on the manifold

union assembly.

3. Finished installation should look like the picture in

Figure 3. The Inlet label is on top and before the union

going into the ﬁlter.

Teﬂon taped

tailpiece

threaded

into “inlet” and

discharge

Gasket rib should be seated

into slot

Inlet Label

WARRANTY

For product registration visit: www.waterwayplastics.com.

For Warranty questions or claims please contact point of purchase.

810-0190.0618

2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403

www.waterwayplastics.com • [email protected]

Designed,

Engineered &

Manufactured

in the USA.

Laadige alla PDF