Panasonic CZTACG1 Kasutusjuhend

Model No. CZ-TACG1

USER’S MANUAL

Controller (Network Adaptor)

POWER

LINK

STATUS

SETUP

CHECK

2

Safety Precautions .................................................2 ~ 3

System Overview ..........................................................4

Before Installing the Adaptor ......................................4

Parts Identiﬁ cation .......................................................4

Parts...............................................................................5

Adaptor Installation ......................................................5

Connecting Network .....................................................6

Starting “Panasonic Comfort Cloud” .........................6

Use the “Panasonic Comfort Cloud” ..........................9

Troubleshooting .........................................................14

Information .................................................................. 15

Firmware Update Function ........................................15

Software License Information ...................................16

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before using this product, and save this

manual for future use.

Table of Contents

Model No. CZ-TACG1

Controller (Network Adaptor)

Safety Precautions

 Read the following “SAFETY PRECAUTIONS” carefully before

installation.

 Electrical work must be installed by a licensed electrician. Be

sure to use the correct rating and main circuit for the model to

be installed.

 The caution items stated here must be followed because

these important contents are related to safety. The meaning of

each indication used is as below. Incorrect installation due to

ignoring of the instruction will cause harm or damage, and the

seriousness is classiﬁ ed by the following indications.

 Please provide this setup guide to the user after installation.

Instruct user to keep it with the instruction manuals of the air

conditioner in safe location.

WARNING

This indication shows the possibility

of causing death or serious injury.

CAUTION

This indication shows the possibility

of causing injury or damage to

properties.

The items to be followed are classiﬁ ed by the symbols:

Symbol with white background denotes item that is

PROHIBITED from doing.

Symbol with dark background denotes item that must

be carried out.

WARNING

 Do not set up in places where there is a lot of

steam, such as bathrooms.

- This can cause electric shock or ignition due to

shorting.

 Do not disassemble or modify.

- This can cause electric shock or ignition.

3

 Do not touch with wet hands.

- This can cause electric shock or ignition due to

shorting.

 Do not set up in hospitals or places where

electronic medical devices are located.

- Radio waves emitting from this adaptor may interfere

with electronic medical devices and cause them to

malfunction.

 Do not set up where children can reach the adaptor.

- They may pull on it or cause themselves an injury.

 Do not wipe with wet cloths or wash in water.

- This can cause electric shock or ignition.

WARNING

 This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

 Request installation only from the place of purchase

or an installer.

- Not doing so may cause electric shock or ignition.

 Shut off the power supply when installing this

adaptor.

- Not doing so may cause electric shock.

 Use only the speciﬁ ed parts when installing the

adaptor and perform the installation correctly by

following the instructions.

- Not doing so may cause electric shock or ignition.

 Ensure cables are installed properly so that external

forces cannot affect them.

- Not doing so may cause overheating which can lead

to ignition.

 Stop use as soon as you notice any problems or

malfunctions and shut off the electric supply to the

connected appliance.

- Not doing so may cause smoke, ignition, electric

shock, or burns.

- Examples of problems and malfunctions

• There is a burning smell

• Water or a foreign object has gotten inside

 Immediately request repair from the place of

purchase or the installer.

CAUTION

 The adaptor is indoor use only. Do not set up

outside or in unsecured locations.

- It may provide an entry point for unauthorised network

access.

 Do not set up in locations exposed to direct

sunlight, where the temperature may exceed 45°C or

go below -5°C.

- This can cause deformation.

 Do not install in locations where oils are used a lot

or where steam or sulphurous gases are emitted.

- This can cause loss of performance or deformation.

 Before connecting wires and cables, discharge any

static electricity.

- Not doing so may cause malfunction.

4

System Overview

CAUTION

 Do not stand on an unstable surface when operating

or checking the adaptor.

- This can cause injury from falls.

Indoor unit

Network adaptor

CZ-TACG1

Wireless LAN

Router

Internet

Before Installing the Adaptor

• Requires a Smartphone that is iOS/Android compatible;

• The Network adaptor (adaptor) is designed speciﬁ cally as a terminal for the

“Panasonic Comfort Cloud”;

• Do not attach the adaptor to metal as wireless performance will be adversely

affected;

• The adaptor recommended to be installed outside of the indoor unit. (It needs to

be accessed when connecting it or when there is a problem.);

• The Wireless LAN network coverage must include the air conditioner installation

location;

• Do connect the Wireless LAN to a compatible Panasonic Air Conditioner with a

connectivity interface port.

Speciﬁ cation

Input Voltage DC 12V (From air conditioner indoor unit)

Power consumption Max: 660 mW

Size 66 mm (H) x 36 mm (W) x 12 mm (D)

Weight Approx. 85g

Interface 1x Wireless LAN

Wireless LAN standard IEEE 802.11 b/g/n

Frequency range 2.4 GHz band

Encryption WPA2-PSK (TKIP/AES)

Parts Identiﬁ cation

5

4

3

2

1

6

No Item Description

1 Power LED Indicates that the adaptor is being supplied with

power.

2 Link LED Indicate the communication status of adaptor to

the server.

3 Status LED Indicate the communication status of adaptor to

the air-conditional.

Green: status without weekly timer

Orange: status with weekly timer

Red: Abnormality

Red  Orange  Green : Auto updating

adaptor ﬁ rmware

During signal strength checking:-

Strong: 

Medium: 

Weak: 

No signal: 

4 Setup Switch* Connection setup mode switching

5 Check Switch* Signal strength checking (press and hold for 5

seconds then release)

Disable LEDs display (press and hold for 10

seconds then release)

6 Reset* Soft reset

* The device factory reset can be done by press and hold CHECK and SETUP

button for 10 seconds. After release the CHECK and SETUP button, press the

reset button.

5

Parts

Adaptor Unit

(CZ-TACG1)

POWER

LINK

STATUS

SETUP

CHECK

Screw for mounting

(M4 x 20 – 1 piece)

Mounting cord clamp

(1 piece)

Cable tie (1 piece)

Double-sided

adhesive tape

Wall plug

Adaptor Installation

1. Attach the Adaptor unit with double-sided adhesive tape

on the wall near the indoor unit.

- Shut off the power supply when installing this adaptor.

- Make sure the wall is clean and free from dirt.

Adaptor

Adhesive tape

Wall

2. Use the cord clamp to ﬁ x the cable to the wall.

Pull the cable around as shown in the diagram so that the external force cannot

act on the connector in the adaptor. Furthermore, on the indoor unit end, use

the included cable tie to ﬁ x the cables together when necessary.

LN1 23

Cable tie

Cord clamp

General illustration for

installation use

3. Connect the cable to the CN-CNT connector at the indoor

unit.

Take note each indoor unit CN-CNT connector location might be different.

Please consult authorized dealer.

6

Connecting Network

Establish network connection to the internet via Wireless mode.

1. Turn on the power supply to the indoor unit.

- The Power LED lights (green).

- The Status LED blinking (green).

STATUS

LINK

POWER

2. Download and install the “Panasonic Comfort Cloud”.

3. Follow the instruction of the app to complete the

installation setup. Refer to next page.

- All LEDs lights (green).

STATUS

LINK

POWER

Starting “Panasonic Comfort Cloud”

Use a Smartphone that is iOS/Android compatible.

• User interface image may change without notiﬁ cation.

• There is no charge for using this application. However, other charges may be

incurred for connection and operation.

• Updates to the service may mean there are changes to the design of the screen

and display.

1. Login to the “Panasonic Comfort Cloud”

Login with your Panasonic ID and password.

Panasonic ID can be registered free from the link on the

page or at the following URL.

(https://csapl.pcpf.panasonic.com/Account/Register 001)

2. Connection Guide

i. At My Home screen, tap “+” to add new product.

ii. Select the product that you want to add.

iii. Tap “Start” to begin the connection setup.

7

iv. Tap “Next” after conﬁ rming the POWER LED of the

network adaptor is ON.

v. If you are the ﬁ rst user (administrator) to operate the

air conditioner via this application, reset the network

adaptor with a pin and tap “Next”.

vi. Choose the button that matches the status of LINK

LED on the network adaptor.

vii. Tap on the preferred connection setup mode.

- To “Connect with WPS mode”, proceed to

instruction 3.1 (For router that supports WPS)

- To “Connect with AP mode”, proceed to instruction

3.2 (For router that does not support WPS)

3.1 Connect with WPS Mode

i. Press the “WPS” button on the router to establish

connection.

ii. Tap “Next” after the router is ready for connection.

iii. Press and hold the “SETUP” button on the network

adaptor for 5 seconds.

iv. Release the “SETUP” button when both STATUS

LED and LINK LED start to blink. Tap “NEXT”.

v. Wait until LINK LED is ON indicates the connection

setup is complete. Tap “NEXT” and proceed to

instruction 4.

8

3.2 Connect with AP Mode

i. Press and hold the “SETUP” button on the network

adaptor for 10 seconds.

ii. Release the “SETUP” button when the STATUS LED

starts to blink in orange.

iii. Tap “NEXT”.

iv. Tap “To wireless network settings of the smartphone”

to change the wireless network connection of the

smartphone to the following network, the smartphone

will connect to the network adaptor.

SSID: Panasonic-CZ-T-wirelessAP

Password: Rac8pswa

v. A window will prompt, tap “Copy password and next”

to proceed to smartphone wireless network setting.

vi. Connect to “Panasonic-CZ-T-wirelessAP” network

and back to the application to continue with the

setup.

vii. Tap “To wireless network setting” to setup the

wireless network connection of the network

adaptor.

viii. Connect the network adaptor to wireless router.

Select your wireless router.

ix. Enter the password of the selected wireless router.

x. The LINK LED will light up when the network

adaptor successfully connects to the server.

Tap “NEXT” and proceed to instruction 4.

* During network adaptor connecting to wireless

router, STATUS LED and LINK LED will blink

simultaneously.

9

4. Setup completion

i. Input the Device ID. Device ID is written at name

plate attached to the network adaptor or label

attached on the packaging.

ii. Set the password for the network adaptor.

iii. Tap “Register” to complete the setup.

iv. You can name the air conditioner unit to help you

identify it.

Use the “Panasonic Comfort Cloud”

User's manual can be found under Menu tab.

The “Panasonic Comfort Cloud” is connected to the

network adaptor and ready for use.

Login

Install and launch the app

“Panasonic Comfort Cloud”

(Android 4.4 and above)

“Panasonic Comfort Cloud”

(iOS 9 and above)

Login Page

Home Screen

Panasonic ID

Password

Reset Panasonic ID / Password

Register for new Panasonic ID

Start a demostration

Main Menu (Page 10)

1

st

Group

Device

2

nd

Group

Add new device

10

Main Menu

Options for administrator only

User list (Page 10)

Change device password (Page 10)

Replace the device (Page 11)

Change router setting (Page 11)

List of device (Page 11)

List of group (Page 12)

Change the language of the app

User Manual

Terms of use

Copyright

Logout from current Panasonic ID

User list

Change of device password

Edit the name of the user

Enable control of user

User’s control rights

Input old password

Input new password

Retype new password

Edit / delete the user control

11

Replace the device

Change the router setting

Tap Start

Follow the step by

step instruction from

app

Follow the step by

step instruction from

app

Select “Replace device”

from the menu

Select “Change router

setting” from the menu

Device list

Delete the device

Edit the device

information and setting

Edit device name

Change device group

Time zone selection

Features selection

12

Group List

Edit the group name

Delete the group

Input new group name

Add new group

Main Device Screen

Information

Back

Information

Switch between

device

Off / On air conditioner

Statistic (Page 13)

Weekly timer

(Page 14)

Basic features

Operating Mode

(Page 13)

Setting temperature

change

Set temperature

Setting temperature

change

Advance setting

(Page 13)

Status for all air

conditioner in the

same group (Page 13)

User Approval

User’s control right

Air conditioner error

messages

Notiﬁ cations

Indoor air temperature

* Subject to model

compatibility

Outdoor ambient

temperature

13

Air Conditioner Status

Advance setting Operating mode

Air conditioners status

(Off / On, mode and set temperature)

Individual off / on toggle

All off / on

Change fan speed

Auto fan

Mode selection

* Subject to model

compatibility

Change swing

position

Auto air swing

Additional features

off / on

Statistics

Comparison

Date selection

Week selection

Month selection

Year selection

Selection of type

Chart

Set temperature

Outdoor Temperature

Indoor Temperature

Comparison Date

Selection

Date Selection

Information of the

selection date

* Estimated energy consumption may not be supported

by certain models.

Information of the

selection comparison date

14

Weekly Timer

Add new timer

Set time

Set conditions

Edit timer

Off / On timer

Add new timer

Edit Timer

Copy timer

Select mode

Select temperature

Off / On

Troubleshooting

 When the power LED does not light up

(no power supply to the adaptor)

 Check the power supply.

 Check the connection of the cable.

 When the status LED does not light up

(Adaptor can’t communicate with air-conditioner)

 Check the connection of the cable.

 The connection between your device and a client through wireless network

cannot be established.

 Ensure that the wireless network function is enabled.

 Refresh the network list and select the correct SSID.

 Check the IP address, and ensure that your client can automatically obtain

an IP address.

 Enter the correct network key (wireless network password) when you connect

with AP mode.

 Reset device Password

(In case you forgot the device Password)

 Remove the device from device list and add back the device.

 Factory reset the device and add back the device. The device factory reset

can be done by press and hold CHECK and SETUP button for 10 seconds.

After release the CHECK and SETUP button, press the reset button.

STATUS

LINK

POWER

15

Information for Users on Collection and Disposal of Old Equipment

 Your product is marked with this symbol. This symbol means that

electrical and electronic products shall not be mixed with unsorted

household waste.

 Do not try to dismantle the system yourself: the dismantling of the

product and of other parts must be done by a qualiﬁ ed installer in

accordance with relevant local and national legislation.

 Product and waste must be treated at a specialized treatment

facility for re-use, recycling and recovery.

English

These symbols on the products, packaging, and/or accompanying documents mean

that used electrical and electronic products and batteries should not be mixed with

general household waste.

For proper treatment, recovery and recycling of old products and used batteries,

please take them to applicable collection points, in accordance with your national

legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries,

please contact your local municipality, your waste disposal service or the point of

sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with

national legislation.

For users in the European Union

If you wish to discard electrical and electronic equipment, please contact your

dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these

items, please contact your local authorities or dealer and ask for the correct method

of disposal.

Declaration of Conformity (DOC)

Hereby, “Panasonic Corporation” declares that this product

is in compliance with the essential requirements and other

relevant provisions of Directive 2014/53/EU

The full text of the EU declaration of conformity is available at the

following internet address: http://www.ptc.panasonic.eu/

Authorized Representative: Panasonic Testing Centre, Panasonic

Marketing Europe GmbH, Winsbergring 15, 22525 Hamburg, Germany

Norway: There are usage restrictions within a radius of 20 km from the

centre of Ny-Alesund on Svalbard.

Information Firmware Update Function

This product has functionality for connecting to the Panasonic ﬁ rmware update

server over the Internet to automatically update the device ﬁ rmware to the latest

version.

To update the ﬁ rmware, the device will do check, once per day, whether its ﬁ rmware

is the latest version after power up. And if an update is required, the update is

applied and the device restarts automatically. Operations are not possible while the

device is being restarted (which takes about 1-5 minutes).

16

Software License Information

This product incorporates the following software:

(1)

The software developed independently by or for Panasonic Corporation,

(2) The software owned by third party and licensed to Panasonic Corporation,

(3) The open source software under the BSD licence and/or equivalent licenses.

The software categorized as of (3) is distributed in the hope that it will be

useful, but WITHOUT ANY WARRANTY, without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

The following license terms shall be applied to Open-Sourced Components.

1. Supplicant license

This software may be distributed, used, and modiﬁ ed under the terms of BSD

license:

Redistribution and use in source and binary forms, with or without modiﬁ cation, are

permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of

conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this

list of conditions and the following disclaimer in the documentation and/or other

materials provided with the distribution.

3. Neither the name(s) of the above-listed copyright holder(s) nor the names of

its contributors may be used to endorse or promote products derived from this

software without speciﬁ c prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Setting Information

Wireless interface address (MAC)

Wireless interface serial number (ID)

Wireless interface code (PIN)

Indoor unit model name

Indoor unit serial number

Outdoor unit model name

Outdoor unit serial number

System commissioning date

Wireless interface installation date

Installer Contact Details

Name

Telephone number

Maximum radio-frequency power transmitted in the frequency

bands

Type of wireless Frequency band Max EIRP (dBm)

WLAN 2412-2472 MHz 20 dBm

Manufactured by: Panasonic Corporation

1006 Kadoma, Kadoma City, Osaka, Japan

Importer for Europe: Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

No. Model CZ-TACG1

MANUAL PENGGUNA

Alat Kawalan (Penyesuai Rangkaian)

POWER

LINK

STATUS

SETUP

CHECK

2

Peringatan Keselamatan ........................................2 ~ 3

Gambaran Keseluruhan Sistem ..................................4

Sebelum Memasang Penyesuai ..................................4

Pengenalan Bahagian ..................................................4

Bahagian .......................................................................5

Pemasangan Penyesuai...............................................5

Sambungan ke Rangkaian ...........................................6

Memulakan “Panasonic Comfort Cloud” ...................6

Gunakan “Panasonic Comfort Cloud” .......................9

Penyelesaian Masalah................................................14

Maklumat .....................................................................15

Fungsi Kemas Kini Firmware ....................................15

Maklumat Lesen Perisian...........................................16

Jadual Kandungan

Terima kasih kerana membeli produk Panasonic ini.

Sila baca arahan ini dengan teliti sebelum menggunakan produk ini dan simpan

manual ini untuk kegunaan akan datang.

Peringatan Keselamatan

 Baca “PERINGATAN KESELAMATAN” yang berikut dengan teliti

sebelum pemasangan.

 Kerja elektrik mesti dipasang oleh juruelektrik berlesen.

Pastikan anda menggunakan pengkadaran dan litar utama

yang betul untuk model yang akan dipasang.

 Item amaran yang dinyatakan di sini mesti dipatuhi kerana

kandungan penting ini adalah berkaitan dengan keselamatan.

Makna setiap petunjuk yang digunakan adalah seperti berikut.

Pemasangan yang tidak betul kerana mengabaikan arahan

akan menyebabkan bahaya atau kerosakan, dan tahap

keterukan dikelaskan dengan petunjuk yang berikut.

 Sila sertakan panduan persediaan ini kepada pengguna

selepas pemasangan. Maklumkan kepada pengguna bahawa

ia mesti disimpan bersama manual arahan penyaman udara di

tempat yang selamat.

AMARAN

Petunjuk ini menandakan

kemungkinan kematian atau

kecederaan serius.

AWAS

Petunjuk ini menandakan

kemungkinan kecederaan atau

kerosakan kepada harta.

Item berikut dikelaskan dengan simbol:

Simbol dengan latar belakang putih menandakan item

yang DILARANG buat.

Simbol dengan latar belakang gelap menandakan item

yang mesti dilakukan.

AMARAN

 Jangan pasang di tempat yang berwap seperti bilik

mandi.

- Tindakan ini boleh mengakibatkan kejutan elektrik

atau nyalaan api disebabkan litar pintas.

 Jangan membuka atau mengubah suai unit.

- Tindakan ini boleh mengakibatkan kejutan elektrik

atau nyalaan api.

No. Model CZ-TACG1

Alat Kawalan (Penyesuai Rangkaian)

3

 Jangan sentuh dengan tangan yang basah.

- Tindakan ini boleh mengakibatkan kejutan elektrik

atau nyalaan api disebabkan litar pintas.

 Jangan pasang di hospital atau tempat yang

mempunyai peranti perubatan elektronik.

- Gelombang radio yang terpancar daripada penyesuai

ini mungkin mengganggu peranti perubatan elektronik

dan menyebabkan kerosakan.

 Jangan pasang penyesuai di tempat yang boleh

dicapai kanak-kanak.

- Mereka mungkin menariknya atau menyebabkan

kecederaan.

 Jangan lap dengan kain basah atau membasuhnya.

- Tindakan ini boleh mengakibatkan kejutan elektrik

atau nyalaan api.

AMARAN

 Peralatan ini bukan untuk kegunaan individu

(termasuk kanak-kanak) yang kurang keupayaan

ﬁ zikal, deria atau mental, atau kurang pengalaman

dan pengetahuan, melainkan mereka diawasi

atau diberi arahan tentang cara penggunaan

peralatan oleh orang yang bertanggungjawab atas

keselamatan mereka. Kanak-kanak harus diawasi

bagi memastikan mereka tidak bermain dengan alat

ini.

 Pemasangan hanya boleh dilakukan oleh pihak

penjual atau pemasang.

- Ia boleh menyebabkan kejutan elektrik atau nyalaan

api.

 Putuskan bekalan kuasa apabila memasang

penyesuai ini.

- Ia boleh menyebabkan kejutan elektrik.

 Gunakan bahagian yang ditentukan sahaja semasa

memasang penyesuai dan lakukan pemasangan

yang betul mengikut arahan.

- Ia boleh menyebabkan kejutan elektrik atau nyalaan api.

 Pastikan kabel dipasang dengan betul supaya ia

tidak terjejas dengan daya luaran.

- Ia boleh menyebabkan kepanasan melampau yang

boleh mengakibatkan nyalaan api.

 Berhenti menggunakannya sebaik sahaja anda

menyedari apa-apa masalah atau kerosakan

dan putuskan bekalan elektrik ke perkakas yang

disambungkan.

- Ia boleh menyebabkan asap, nyalaan api, kejutan

elektrik atau kebakaran.

- Contoh masalah dan kerosakan

• Terdapat bau terbakar

• Terdapat air atau objek asing di dalamnya

 Minta pihak penjual atau pemasang melakukan

pembaikan dengan segera.

AWAS

 Penyesuai adalah untuk kegunaan dalaman sahaja.

Jangan pasang di luar atau di lokasi yang tidak

selamat.

- Ia boleh menjadi titik entri bagi capaian rangkaian

tanpa kebenaran.

 Jangan pasang di lokasi yang terdedah kepada

cahaya matahari secara terus yang mungkin

mempunyai suhu melebihi 45°C atau serendah -5°C.

- Tindakan ini boleh menyebabkan perubahan bentuk.

 Jangan pasang di lokasi yang berminyak, berwap

atau tercemar dengan gas sulfurus.

- Tindakan ini boleh menjejaskan prestasi atau

menyebabkan perubahan bentuk.

 Sebelum menyambungkan wayar dan kabel,

lepaskan apa-apa bekalan elektrik statik.

- Ia boleh menyebabkan kerosakan.

4

Gambaran Keseluruhan Sistem

AWAS

 Jangan berdiri di atas permukaan tidak stabil

semasa mengendalikan atau memeriksa penyesuai.

- Tindakan ini boleh menyebabkan anda terjatuh dan

tercedera.

Unit dalaman

Penyesuai rangkaian

CZ-TACG1

LAN Wayarles

Penghala

Internet

Sebelum Memasang Penyesuai

• Memerlukan Telefon Pintar yang serasi iOS/Android;

• Penyesuai Rangkaian (penyesuai) direka khusus sebagai terminal untuk

“Panasonic Comfort Cloud”;

• Jangan sambungkan penyesuai dengan logam kerana prestasi wayarles akan

terjejas;

• Penyesuai disarankan dipasang di luar unit dalaman. (Ia perlu dicapai semasa

menyambungkannya atau jika terdapat masalah.);

• Liputan rangkaian LAN Wayarles mesti termasuk dalam lokasi pemasangan

penyaman udara;

• Sambungkan LAN Wayarles dengan Penyaman Udara Panasonic menggunakan

port antara muka yang boleh bersambung.

Spesiﬁ kasi

Voltan Masukan

DC 12V (Daripada unit dalaman penyaman udara)

Penggunaan kuasa Maksimum: 660 mW

Saiz 66 mm (T) x 36 mm (L) x 12 mm (D)

Berat Anggaran 85g

Antara muka 1x LAN Wayarles

LAN Wayarles standard IEEE 802.11 b/g/n

Julat frekuensi Jalur 2.4 GHz

Penyulitan WPA2-PSK (TKIP/AES)

Pengenalan Bahagian

5

4

3

2

1

6

Nombor Item Penerangan

1 LED Power (Kuasa) Menandakan penyesuai sedang menerima

bekalan kuasa.

2 LED Link

(Sambungan)

Menandakan status komunikasi penyesuai

dengan pelayan.

3 LED Status (Status) Menandakan status komunikasi penyesuai

dengan penyaman udara.

Hijau: status tanpa pemasa mingguan

Jingga: status dengan pemasa mingguan

Merah: Ketaknormalan

Merah  Jingga  Hijau :

Pengemaskinian

automatik ﬁ rmware

penyesuai

Semasa pemeriksaan kekuatan isyarat:-

Kuat:    

Sederhana:   

Lemah:  

Tiada isyarat: 

4 Suis Persediaan* Suis mod persediaan sambungan

5 Suis Periksa* Pemeriksaan kekuatan isyarat (tekan selama 5

saat, kemudian lepaskan)

Hentikan paparan LED (tekan selama 10 saat,

kemudian lepaskan)

6 Tetapan semula* Mula semula

*

Tetapan semula kilang peranti boleh dilakukan dengan menekan butang CHECK

(PERIKSA) dan SETUP (PERSEDIAAN) selama 10 saat. Selepas melepaskan butang

CHECK (PERIKSA) dan SETUP (PERSEDIAAN), tekan butang tetapan semula.

Leht laaditakse ...

Panasonic CZTACG1 Kasutusjuhend

Panasonic CZTACG1 Kasutusjuhend

Seotud paberid

Muud dokumendid