The control panel is automatically blocked against
activation if 30 seconds no key is touched. For any
settings the control panel must be unlocked
Touch key "G" for 3 seconds to block all panel
elements against activation (Fig. 5.5). The related
indicator "d" is now displayed.
For unlocking touch again the key.
5.6 Door opening alarm
When one of the refrigerator doors is opened for more than 1 minute, the door opening
alarm will sound. The alarm can be silenced by closing the door. If the door is left open for
more than 7 minutes, the light inside the refrigerator and control panel illumination will
automatically switch off.
5.7 Select the working mode
You may need to select one of the following two ways to set the appliance:
5.7.1 Auto Set mode
If you do not have any special requirements, we
recommend that you use Auto Set mode In the mode,
the appliance can automatically adjust the temperature
setting according to the ambient temperature and
temperature change in the appliance. This function is
totally hand free.
1. Unlock the panel by touching key "G" if it is locked
(Fig. 5.5)
2. Touch key “D" (Fig 5.7.1.1)
3. Indicator ''d3" illuminates and the function is
activated (Fig. 5.7.1-2)
By repeating the above steps or selecting an other
function this function can be switched off again.
5.7.2 Manual adjusting mode
If you want to manually adjust the temperature of the appliance in order to store a
particular food, you can set the temperature via a temperature adjusting key:
Notice: Conflict with other functions
The temperature cannot be adjusted, if any other function (Super-Cool, Super-
Freeze, Holiday or Auto Set) is activated or the display is locked. The corresponding
indicator will flash accompanying with a buzzer
5- Use GB
5.7.2.1 Adjust the temperature for fridge
1.
2.
3.
4.
Unlock the panel by touching key "G" if it is locked
(Fig. 5.5).
Touch key "A” (Fridge) to select the fridge
compartment. The actual temperature in the
fridge compartment is displayed (Fig. 5.7.2-1).
Touch sequentially key A" (Fridge) until the desired
value of temperature is flashing (Fig. 5.7.2-2).
A signal will sound at each key touch. The
temperature decreases in sequences of 1°C from
a minimum of 1°C to a maximum of 9°C. The
optimum temperature in the fridge is 5 °C. Colder
temperatures mean unnecessary energy con-
sumption.
Touch any key except „A" (Fridge) to confirm, or
the setting confirms automatically after 5 seconds.
Displayed temperature stops flashing.
5.7.2.2 Adjust the temperature for freezer
1.
2.
3.
-
4.
Unlock the panel by touching key "G" if it is locked
(Fig. 5.5).
Touch key ”B" (Freezer) to select the freezer
compartment. The actual temperature in the
freezer compartment is displayed (Fig. 5.7.2-3).
Touch sequentially key ''B" (Freezer) until the
desired value of temperature is flashing (Fig. 57.2-4).
A signal will sound at each key press. The
temperature increases in sequences of 1°C from
14°C to-24°C. The optimum temperature in the
freezer is -18°C. Colder temperatures mean
unnecessary energy consumption.
Touch any key except „B" (Freezer) to confirm, or
the setting confirms automatically after 5 seconds.
Displayed temperature stops flashing.
Notice: Influences on temperatures
The indoor temperatures are influenced by the following factors.
Ambient temperature
Frequency of door opening
Amount of stored foods
Installation of the appliance
14