LG NB3531A Omaniku manuaal

Kategooria
Heliriba kõlarid
Tüüp
Omaniku manuaal
OWNER’S MANUAL
300
W Sound bar system
Please read this manual carefully before operating your set and retain it
for future reference.
NB3530A (NB3530A, S33A1-D)
NB3531A (NB3531A, S33A2-D)
ENGLISH
NB3531A-NB_DHKGLLK_ENG_2485.indd 1 2013-10-30  11:02:09
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sucient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturers
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owners manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
NB3531A-NB_DHKGLLK_ENG_2485.indd 2 2013-10-30  11:02:10
Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
Europe Notice
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Contact oce for compliance of this product :
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
y
Please note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
Indoor Use Only
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.
IMPORTANT SAFETY NOTICE
The cord grip for the plug tted to this product
is built into the existing power cord as supplied.
If, for any reason you need to shorten the cord.
DO NOT RE-USE THE PLUG
A new plug must be used to ensure your
continued safety by securing the plug to the
power cord in accordance with Plug & Socket
Regulations 1994.
NB3531A-NB_DHKGLLK_ENG_2485.indd 3 2013-10-30  11:02:11
Please click HERE for DoC.
Getting Started4
Getting Started
1
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Auto power down
6 Portable In
6 Speaker ez (easy) setup
6 LG Sound Sync
6 Introduction
6 Symbols used in this manual
6 Accessories
7 Remote control
8 Front panel
8 Rear panel
9 Mounting the main unit on a wall
11 Setting up
11 Pairing wireless subwoofer
2 Connecting
12 Optional equipment connection
12 PORT. (Portable) IN connection
12 OPTICAL In connection
13 USB connection
13 Playable file
13 Compatible USB devices
13 USB device requirement
3 Operating
14 Basic operations
14 USB operation
14 Other operations
14 DRC (Dynamic range control)
14 AV Sync
14 Displaying file and input source
14 Turn off the sound temporarily
15 AUTO POWER On/Off
15 Auto power down
15 Sleep timer setting
15 – Dimmer
16 LG Sound Sync
17 Using Bluetooth® technology
18 Listening to music stored on the
Bluetooth devices
19 Sound adjustment
19 Setting the surround mode
19 Auto volume On/Off
19 Adjust the woofer level settings
20 Controlling a TV with the supplied remote
control
20 Setting up the remote to control your
TV
NB3531A-NB_DHKGLLK_ENG_2485.indd 4 2013-10-30  11:02:11
Table of Contents 5
1
2
3
4
5
4 Troubleshooting
21 Troubleshooting
5 Appendix
22 Trademarks and licenses
22 Maintenance
22 Handling the unit
23 Specifications
NB3531A-NB_DHKGLLK_ENG_2485.indd 5 2013-10-30  11:02:11
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit will automatically turn itself o for saving
energy consumption.
Portable In
Listen to music from your portable device. (MP3,
Notebook, etc)
Speaker ez (easy) setup
Listen to sounds from TV, DVD or Digital device
with vivid 2.1 or 2.0 ch mode.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Introduction
Symbols used in this manual
,
Note
Indicates special notes and operating features.
,
Tip
Indicates tip and hints for making the task easier.
>
Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
Remote control (1) Batteries (2)
Wall Mount Bracket
Installation Template
(1)
Wall bracket (1)
Optical cable (1)
Cable ties for arranging
cables (2)
NB3531A-NB_DHKGLLK_ENG_2485.indd 6 2013-10-30  11:02:16
Getting Started 7
Getting Started
1
Remote control
Battery installation
Remove the battery cover on the rear of the
Remote Control, and insert two (size AAA) battery
with
and matched correctly.
• • • • • • • • • •
a
• • • • • • • • •
1
(Power): Switches the unit ON or OFF.
FUNCTION: Changes input sources.
W/S
FOLDER: Searches for a folder of MP3/
WMA les. When an USB containing MP3/ WMA
les in several folders is being played,
press
W/S
FOLDER to select the folder you want
to play.
OPTICAL: Changes input source to optical directly.
MUTE
: Mutes the sound.
-/+ VOL: Adjusts speaker volume.
• • • • • • • • • •
b
• • • • • • • • •
AUTO POWER: This function is automatically
turned on the unit.
AV SYNC: Synchronizes the audio and video.
INFO: Displays the le or input source information.
REPEAT: Listens to your les repeatedly or
randomly.
C/V
(Skip/ Search) :
- Skips Fast backward or Forward.
- Searches for a section within a le.
Z
: Stops playback.
d/M
: Starts playback. / Pauses playback.
SOUND EFFECT: Selects a sound eect mode.
AUTO VOLUME: Turns on and o the AUTO
VOLUME mode.
WOOFER LEVEL: Sets the sound level of woofer.
• • • • • • • • • •
c
• • • • • • • • •
0 to 9 numerical buttons: Selects numbered les.
DRC: Sets DRC(Dynamic range control) function.
SLEEP: Sets the system to turn o automatically at
a specied time.
• • • • • • • • • •
d
• • • • • • • • •
TV Control buttons: See page 20.
NB3531A-NB_DHKGLLK_ENG_2485.indd 7 2013-10-30  11:02:18
Getting Started8
Getting Started
1
A
1/!
(Standby/On)
B
– / + (Volume)
Adjusts speaker volume.
C
T
(Play / Pause)
D
I
(Stop)
E
F (Function)
Press it repeatedly to select other function.
F
Speakers
G
Display window
H
USB Port
Open USB cover by using your nger to
connect USB.
,
Note
Precautions in using the touch buttons
y
Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
y
Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
y
Touch the button that you want to work in
order to operate the function correctly.
y
Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
>
Caution
Front panel
Rear panel
A
PORT. (Portable) IN
B
OPTICAL IN 1/ 2
A B C D
E
F G
H
F
B
A
NB3531A-NB_DHKGLLK_ENG_2485.indd 8 2013-10-30  11:02:21
Getting Started 9
Getting Started
1
Mounting the main
unit on a wall
You can mount the main unit on a wall.
Prepare screws and brackets.
Unit
Wall bracket
Wall Mount Bracket
Installation Template
1. Match the TVs BOTTOM EDGE of Wall Mount
Bracket Installation Template with the bottom
of TV and attach to the position.
TV
2. When you mount it on a wall (concrete), use
the wall plugs (Not supplied). You should drill
some holes. A guide sheet (Wall Mount Bracket
Installation Template) is supplied to drill. Use the
sheet to check the point to drill.
Wall Mount Bracket Installation Template
Screws and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting. Please
purchase it.
,
Note
NB3531A-NB_DHKGLLK_ENG_2485.indd 9 2013-10-30  11:02:23
Getting Started10
Getting Started
1
3. Remove the Wall Mount Bracket Installation
Template.
4. Fix it with screws (not supplied) as shown in the
illustration below.
5. Hang the main unit onto the bracket as shown
below.
y
Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
y
Do not hang onto the installed unit and
avoid any impact to the unit.
y
Secure the unit rmly to the wall so that it
does not fall o. If the unit falls o, it may
result in an injury or damage to the product.
y
When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
>
Caution
Detach the unit from the bracket as shown
below.
,
Note
NB3531A-NB_DHKGLLK_ENG_2485.indd 10 2013-10-30  11:02:26
Getting Started 11
Getting Started
1
Setting up
Pairing wireless subwoofer
LED indicator of wireless subwoofer
LED Colour Status
Yellow The wireless subwoofer is
receiving the signal of the unit.
Yellow (blink) The wireless subwoofer is trying
to connect.
Red The Wireless subwoofer is in
standby mode.
O (No
display)
The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Manually pairing wireless subwoofer
When the connection failed, you can see the red
LED on the subwoofer and cannot get sound from
the subwoofer. To solve this problem, follow the
steps below.
1. Press and hold
I
on the unit and MUTE
on
the remote control simultaneously.
- “REMATE” appears on the display window.
2. Press PAIRING on back of the woofer.
- The Yellow LED will flicker.
3. Turn off and on the unit.
- If you see the yellow LED, it s successful.
4. If you don’t see the yellow LED, try again Step 1
- Step 3.
y
If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y
Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
y
Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y
It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
,
Note
NB3531A-NB_DHKGLLK_ENG_2485.indd 11 2013-10-30  11:02:26
2 Connecting
Connecting12
Connecting
2
Optional equipment
connection
PORT. (Portable) IN
connection
MP3 player, etc...
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable player or external devices.
1. Connect the portable player to the
PORT. (Portable) IN connector of the unit.
2. Turn the power on by pressing
1
.
3. Select the PORTABLE function by pressing
FUNCTION.
4. Turn on the portable player or external device
and start playing it.
OPTICAL In connection
Connect optical output of external devices to the
OPTICAL IN 1 or OPTICAL IN 2 connector.
To the digital
optical output jack of
external device
Speaker ez (easy) setup
Listens to sound from TV, DVD or Digital Device
with 2.1 or 2ch mode.
1. Connect the OPTICAL 1 or OPTICAL 2 jack on
the back of the unit to optical out jack of your
TV (or digital device etc.)
2. Select the input source to OPTICAL 1 or
OPTICAL 2 directly by pressing OPTICAL.
3. Listen to sound with 2.1 or 2ch speaker.
4. Press OPTICAL repeatedly to exit from OPTICAL.
Function is retuned to previous one.
This unit turns on and selects OPTICAL function
directly even in power-o state. Press OPTICAL
on the remote control.
,
Tip
NB3531A-NB_DHKGLLK_ENG_2485.indd 12 2013-10-30  11:02:27
Connecting 13
Connecting
2
USB connection
Insert USB memory device to the USB port on the
unit.
Removing the USB Device from the unit.
1.
Choose a different function mode or press
Z
on the remote control or
I
on the unit twice
in a row.
2. Remove the USB device from the unit.
Playable file
MP3/WMA file requirement
MP3/ WMA le compatibility with this unit is limited
as follows :
y
Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
y
Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y
Maximum les : Under 999
y
File extensions : “.mp3”/ “.wma
y
A protected le by DRM(Digital rights
management) cannot be played on the unit.
Compatible USB devices
y
MP3 Player : Flash type MP3 player.
y
USB Flash Drive : Devices that support USB1.1.
y
The USB function of this unit does not support
some USB devices.
USB device requirement
y
Devices which require additional program
installation connected to a computer, are not
supported.
y
Do not extract the USB device while in operation.
y
For a large capacity USB, it may take longer than
a few minutes to be searched.
y
To prevent data loss, back up all data.
y
This unit is not supported when the total
number of les is 1,000 or more.
y
The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
y
The exFAT le system is not supported on this
unit.
y
Depending on some devices, it may not be able
to recognize the followings on this unit.
-
External HDD
-
Card readers
-
Locked devices
-
Hard type USB devices
-
USB hub
-
Using USB extension cable
NB3531A-NB_DHKGLLK_ENG_2485.indd 13 2013-10-30  11:02:28
3 Operating
Operating14
Operating
3
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION.
3. Select a file you want to play by pressing
C
or
V
.
To Do this
Stop Press
Z
.
Playback Press
d/M
.
Pause Press
d/M
during playback.
Skipping to the
next/previous
le
During playback, press
C
or
V
to go to the next le
or to return to the beginning
of the current le.
Press
C
twice briey to
step back to the previous le.
Searching for a
section within a
le
Press and hold
C
/
V
during playback and release it
at the point you want to listen
to.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly, the display
change in the following order,
RPT 1
RPT DIR (Directory)
RPT ALL RANDOM OFF.
Selecting les
directly
Press 0 to 9 numerical buttons
on the remote control to go
to the desired le directly.
Resume
playback
The unit memorizes the point
at which you've changed
function or the unit had been
turned o.
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
,
Note
Other operations
DRC (Dynamic range control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use
C/V
to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
Displaying file and input
source
You can display various information on the USB and
OPTICAL IN 1/2 mode by pressing INFO.
USB : MP3/ WMA containing le information
OPTICAL IN 1/2 : Audio format, Audio channel
Turn off the sound temporarily
Press MUTE to mute your unit.
You can mute your unit, for example, to answer
the telephone, the
is displayed in the display
window.
To cancel it, press MUTE
again on the remote
control or change the volume level.
NB3531A-NB_DHKGLLK_ENG_2485.indd 14 2013-10-30  11:02:29
Operating 15
Operating
3
AUTO POWER On/Off
Before operating this function, make sure that you
have selected OPTICAL IN and turn on the AUTO
POWER.
This function automatically turns on/o the unit
when you turn on/o the external device (TV, DVD
Player, Blu-ray Disc Player, etc.) connected to this
unit by the optical cable.
When turning on the unit by this function, Optical
function is selected directly no matter what kind of
function has been selected before turning o it.
This function turns on or o each time you press
AUTO POWER.
Display Operation
AUTO POWER ON
AUTO POWER function is
turned on.
AUTO POWER OFF
AUTO POWER function is
turned o.
y
This function is intentionally designed to
turn o the unit after 1 minute of inactivity.
If you did not connect external devices with
optical cable or there is no digital audio
signal going to the unit, the unit will turn o
after 1 minute of inactivity if AUTO POWER
function is turned on.
y
Depending on the connected device by the
optical cable, this function may not operate.
y
Once AUTO POWER is set, the unit will
start as OPTICAL mode automatically next
time, no matter what kind of function you
selected before.
y
It is not available to turn on the unit by
AUTO POWER function if you turn o the
unit directly.
y
AUTO POWER function is not supported on
LG Sound Sync (Wireless) mode.
,
Note
Auto power down
This unit will turn o itself to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes.
So does this unit after six hours since Main unit has
been connected to other device using analogue
input.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
Sleep timer setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn o.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
You can check the remaining time before the
Unit turns o.
Press SLEEP. The remaining time appears in
the display window.
,
Note
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim o.
NB3531A-NB_DHKGLLK_ENG_2485.indd 15 2013-10-30  11:02:29
Operating16
Operating
3
LG Sound Sync
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
on the capabilities of your equipment.
y
You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
y
When the connections failed, make sure of
the condition of the TV and power of it.
y
Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-
Turned o the unit.
-
Changing the function to the others.
-
Disconnecting the optical digital audio
cable.
-
Disconnecting the wireless connection
caused by interference or a distance.
,
Note
With wired connection
1. Connect your LG TV to the unit by using an
optical digital cable.
Optical digital cable
2. Set up LG Sound Sync (Optical) on the TV. Refer
to the TV's instruction manual.
3. Turn on the unit.
4. Select OPTICAL 1 or OPTICAL 2 function.
You can see "LG OPT" on the display window if
connecting normally between this unit and your
TV.
The amount of time to turn o this unit is
dierent depending on your TV when you set
AUTO POWER function to ON.
,
Note
NB3531A-NB_DHKGLLK_ENG_2485.indd 16 2013-10-30  11:02:32
Operating 17
Operating
3
With wireless connection
1. Set up LG Sound Sync (Wireless) on the TV. Refer
to the TV's instruction manual.
2. Turn on the unit.
3. Select LG TV function.
"PAIRED" appears on the display window for about
3 seconds and then you can see "LG TV" on the
display window if connecting normally between
this unit and your TV.
Once LG TV function is selected, the unit
connects automatically the TV which is
connected lately when restarting.
,
Note
Using Bluetooth®
technology
About Bluetooth®
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters. (The sound
may be interrupted when the connection interfered
by the other electronic wave or you connect the
bluetooth in the other rooms.)
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo Headset.)
Bluetooth® profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
NB3531A-NB_DHKGLLK_ENG_2485.indd 17 2013-10-30  11:02:32
Operating18
Operating
3
Listening to music stored on
the Bluetooth devices
Pairing this unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
FUNCTION.
Appears “BT and then “BT READY” in display
window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as “LG SOUND BAR”.
3. Enter the PIN code.
PIN code : 0000
4. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and appears “PAIRED.
Depending on the Bluetooth device type,
some device have a dierent pairing way.
,
Note
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
y
You should connect your Bluetooth device
to this unit again when you restart it.
y
The unit connects automatically to the
Bluetooth device which is connected last,
when you select Bluetooth function again
after changing to the other functions.
y
The sound may be interrupted when
the connection interfered by the other
electronic wave.
y
You cannot control the Bluetooth device
with this unit.
y
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y
Although the distance between your
Bluetooth and the set is less than 10 m,
there are obstacles between both, your
Bluetooth device cannot be connected.
y
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
You can enjoy wireless system using phone,
MP3, Notebook, etc..
y
When not connected the Bluetooth, “BT
READY” appears on the display window.
y
The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
y
When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
y
If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
y
The device with Bluetooth® wireless
technology is disconnected, if you turn o
the main unit or put the device away from
the main unit more than 10 m.
,
Note
NB3531A-NB_DHKGLLK_ENG_2485.indd 18 2013-10-30  11:02:32
Operating 19
Operating
3
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
The displayed items for the equalizer may be
different depending on sound sources and effects.
On Display Description
NATURAL
You can enjoy comfortable
and natural sound.
BYPASS
You can enjoy the sound
without equalizer eect.
BASS
The BASS is Bass Blast. During
playback, reinforce the treble,
bass and surround sound
eect.
CLRVOICE
The CLRVOICE is Clear Voice.
This program make voice
sound clear, improving the
quality of voice sound.
GAME
The GAME is Game Equalizer.
You can enjoy more virtual
sound while playing video
games.
NIGHT
The NIGHT is Night Mode.
This may be useful when you
want to watch movies at low
volume late at night.
UPSCALER
The UPSCALER is MP3 Up-
Scaling. When listening to
MP3 les or other compressed
music, you can enhance the
sound. This mode is available
only to 2 channel sources.
LOUDNESS
Improves the bass and treble
sound.
3D SOUND
3D Sound features deliver
sound creating a wider
spot so you can enjoy more
immersive and cinematic
surround sound.
y
In some of surround modes, some speakers,
theres no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
y
You may need to reset the surround mode,
after switching the input, sometimes even
after the sound le changed.
,
Note
Auto volume On/Off
This unit supports Auto volume function that
automatically adjusts the volume level.
When the output sound is too loud or too low,
press AUTO VOLUME on the remote control. So
you can enjoy the sound with appropriate levels.
To cancel this function, press the button again.
Adjust the woofer level
settings
You can adjust the sound level of woofer.
1. Press WOOFER LEVEL.
2. Press -/+ VOL to adjust the sound level of the
woofer.
NB3531A-NB_DHKGLLK_ENG_2485.indd 19 2013-10-30  11:02:32
Operating20
Operating
3
Controlling a TV with
the supplied remote
control
You can control your TV using the buttons below.
VOL +
VOL -
AV/INPUT
PR/CH
PR/CH
Button Operation
MUTE
Turn the TVs volume on or
o
AV/INPUT
Switch the TVs input source
between the TV and other
input sources.
1
(TV POWER) Turn the TV on or o.
VOL +/–
Adjust the volume of the
TV.
PR/CH
W/S
Scan up or down through
memorized channels.
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
,
Note
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down
1
(TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer Code Number
LG 1(Default), 2
Zenith 1, 3, 4
GoldStar 1, 2
Samsung 6, 7
Sony 8, 9
Hitachi 4
2. Release the
1
(TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
NB3531A-NB_DHKGLLK_ENG_2485.indd 20 2013-10-30  11:02:33
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

LG NB3531A Omaniku manuaal

Kategooria
Heliriba kõlarid
Tüüp
Omaniku manuaal