Installing the Bin Rail in Modular Shelves
• Phillips head screwdriver
• 3/8” wrench
These instructions cover installation of the H628 Bin Rail
in modular shelves.
Tools Needed:
1. Line the holes on the bin rail up with the holes on the shelving tube. Slide the three screws, each with a black washer,
through the bin rail and shelving tube to keep them together.
2. Put a black washer and a nut on each screw on the back end of the shelving tube and hand thread it on.
3. Tighten the nut using a 3/8” wrench and a Phillips screwdriver to hold the screw in place on the other side.
REV 11/07/19
-
1
teistes keeltes
- English: Mytee A600 Installation guide
Muud dokumendid
-
Tunturi Work Light R 710 Kasutusjuhend
-
Oracle Fabric Interconnect F2-12 paigaldusjuhend
-
Kawasaki K-MS 1400 Original Instructions Manual
-
Rosemount OCX 8800 O2 / Combustibles Transmitter General Purpose Omaniku manuaal
-
Luna BCS 250P Original Instructions Manual
-
-
Ergotron TM Cantilever, UHD Kasutusjuhend
-
OmniMount ULPC-X Kasutusjuhend
-