Mytee A115 paigaldusjuhend

Mytee
Bränd
Mytee
Mudel
A115
Tüüp
paigaldusjuhend

See käsiraamat sobib ka

Installing the Bin Rail in Modular Shelves
• Phillips head screwdriver
• 3/8” wrench
These instructions cover installation of the H628 Bin Rail
in modular shelves.
Tools Needed:
1. Line the holes on the bin rail up with the holes on the shelving tube. Slide the three screws, each with a black washer,
through the bin rail and shelving tube to keep them together.
2. Put a black washer and a nut on each screw on the back end of the shelving tube and hand thread it on.
3. Tighten the nut using a 3/8” wrench and a Phillips screwdriver to hold the screw in place on the other side.
REV 11/07/19
  • Page 1 1

Mytee A115 paigaldusjuhend

Mytee
Bränd
Mytee
Mudel
A115
Tüüp
paigaldusjuhend
See käsiraamat sobib ka
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid