LevelOne CamCon FCS-1060 Quick Installation Manual

CamCon FCS-1060
LevelOne
Bränd
LevelOne
Mudel
CamCon FCS-1060
Tüüp
Quick Installation Manual
LevelOne IP Camera Quick Installation Guide
Quick Installation Guide
This QIG applies to ：FCS-1010/1030/1040/1050/1060/1070/3000
WCS-2010/2030/2040/2060/2070
Software Installation
Please insert the CD-ROM that comes with the LevelOne IP camera packet.
The installation page should pop up. If you do not see the pop up, please go into the CD-ROM directory and click on
AutoRun.exe
Click on “Install Software”.
Click on “Installation Wizard”.
Please follow the wizard by clicking “Next”.
Click on “Finish” to complete the installation.
Click on the Installation Wizard on your Windows Desktop.
Please choose the IP Camera by MAC address and click “Link to selected device”.
Initial login will have a Window pop up, please click “yes”.
Install Active X.
Complete installation.
Wireless installation
This applies to WCS-2010/2030/2040/2060/2070
Login to the web configuration page, click on Wireless LAN.
Please press “save” after configuration, and then unplug your power cord and RJ-45 LAN cable. Insert Power
cord, do not insert RJ-45 LAN cable. LevelOne IP camera should automatically connect to the preset AP.
Surveillance System QIG
Please insert the CD-ROM that comes with the LevelOne IP camera packet.
The installation page should pop up. If you do not see the pop up, please go into the CD-ROM directory and click on
AutoRun.exe.
Click on “Installation Software”.
SSID：Enter the SSID of your wireless
AP.
Wireless Mode：Infrastructure, if your
network is in multiple AP clients to
AP mode.
Ad-Hoc：If your network is in point
to point connection.
Security：Please match the
security setting of your AP.
Click on Surveillance Software.
Click “Next”.
Click “Yes”.
Please input the User Name and Company Name then click on “Next”.
Please input the Password for accessing the Surveillance software then click on “Next”.
Choose your path of installation, click “Next”.
Click on “Next”.
Click “Next”.
Click on “Finish” to complete installation.
Please click on the Monitor for Surveillance System on your Windows Desktop.
Authentication Windows should pop up, please input the Username as “root”，the password is the preset during
installation.
The surveillance window should appear.
If the window does not pop up, please right click on the icon and choose “Monitor”.
Click on the icon then choose “Camera Configuration”.
Click on “Yes”.
Click on “Insert”.
Input the IP address of your LevelOne IP camera, default port is 80 and password then click on “OK”.
Adding the camera.
When the configuration page pops up, the setting is done.
Click on “Save”.
Click “OK”.
Complete.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

LevelOne CamCon FCS-1060 Quick Installation Manual

CamCon FCS-1060
LevelOne
Bränd
LevelOne
Mudel
CamCon FCS-1060
Tüüp
Quick Installation Manual
Laadige alla PDF
aruanne

teistes keeltes

Seotud paberid

Muud dokumendid