Welland T9 Kasutusjuhend

Smart Body fat scale

Instruction Manual

Scan the corresponding QR Code to download APP

Thanks for choosing Smart body Scale. This fully body composition scale can help you conveniently

measure body weight, Body balance, BMI, Body fat rate, Visceral fat, Body water, Skeletal muscle rate,

Muscle mass, bone mass, Protein, BMR, Body age,Heart rate, Heart Index and etc;

IMPORTANT: Please read these instructions in this manual carefully before using the device. Failure

to comply with the instructions given in the manual or using this scale in ways other than the ones

mentioned in this manual may result in injury to yourself or damage to the scale.

(Onfit APP functions)

Weight Body fat Visceral fat Protein amount BMI

Muscle weight Bone mass Moisture BME Degree of obesity

Body age Muscle Standard weight Without fat BFR

Protein rate Subcutaneous fat Temperature Height record (<16 years old)

Heart rate Heart Index

INDICATION SYMBOLS

LO

Low battery - please change the batteries (3x1.5V AAA battery).

Err

Overload

C

An error has occurred during measurement. Step off the scales and step onto

them again to repeat the measuring process.

WHAT’S IN THE PACKAGE

1 X Smart body fat scale

3 X AAA batteries

1 X User manual

WARNING

DO NOT use with medical implants such as pacemakers.

DO NOT stand on the edge of the scale or jump on it;

DO NOT overload the scale(Max.180kg)

DO NOT drop scale or droop and objects on it as this may

damage the sensors.

DO NOT immerse the scale in water or use chemical cleaning agents. Clean the

scale with slightly damp cloth.

Not recommended for pregnant women.

Not recommended for infants, toddlers, and children under 10 years of age.

Any measurement obtained using this device is for reference only and should not

be considered as a medical opinion.

Consult your primary care doctor or physician before making changes to your

diet, exercise plan or physical activities.

Always place the scale on a hard, dry and flat surface before measurement.

Make sure your feet are dry before stepping on the scale.

Connect the batteries in accordance with the correct polarities indicated.

Remove batteries if the scale is not be use for a prolonged period of time.

SPECIFICATION

Product size: 290x290x20mm

Weight unit:kg

Weight limit: 6kg-180kg

Power Supply: 3xAAA batteries

Account number: No limitation (each account can add 24 persons)

Baby mode: Allow you to scale the weight of baby

Height record: Allow you to record the height info under 16 years old

Operating temperature: 10-400C

Operation humidity: 20%-90%

Support Devices:

iOS 8.0 or higher

Android 6.0 or higher

Install Onfit App

1. Seach “Onfit” in Apple Store or Google Play or scan the QR Code below:

3

2. Download and install the App on your device.

3. The App icon will appear on your phone or tablet after the installation is completed.

HOW TO USE FITDAYS APP

1. Insert 3xAAA batteries which included in the package to the battery holder on the

back at the back of the scale. Place the scale on the hard, flat ground.

2. Turn on the Bluetooth on your smart phone or tablet.

3. Register your own ID by email or social media account.

X

√

4. Add personal data and confirm OK;

Note: Enter the wrong gender, age, height, or corporeal level may result in measurement

being inaccurate.

5. Pair the scale through Bluetooth. Click ----> Device find the scale “Yologram”

now your phone is connected with the scale;

6. Tap your foot on the scales to activate the display. Wait until the display shows

“0.0”kg.

7. Step on the scale with BARE feet to turn the scale on.

Note:

If stepping on the scale with socks, only weight and BMI will be measured and displayed

on the main page. To get complete data, please step on the scale with bare feet.

8. The number on the display is flashing when the scale is weighing and analyzing, keep

stand still on the scale, till it finish showing “0000”, your phone has received all the

data from the scale.

X

√

X

9. You can find the analyzing report on Body Weight, BMI, BFR, Muscle, Bone Mass etc.

(see full details on page 1 RECORDED PARAMETERS). When you click chart, you can see

your long-term track chat form.

10. Add, switch user by click or click --> Manage users, then add personal data.

The Smart Scale can recognize which user is step on it and remind user to switch the

correct user. Each account can support 24users;

11, Weighing baby: slide -->Baby Mode. Step on the scale by you own, after scale scale

gets your weight, and then hold the baby to get the weight of baby.

11. Select user with under age of 16, slide -->height to manual add the height record.

TROUBLE SHOOTING GUIDE

1. Bluetooth not connected

The scale and smart phone must be both have Bluetooth on.

For Android version, you need to allow location permission for the APP;

Need to open the APP during using the scale;

The scale should be with the connection icon showing on the display;

Check the iOS version of your smart phone, it must be iOS 8.0 or

higher/Android 6.0 higher.

Click ---> Device---> + or ---> Setting---> My device---> + to find the scale

‘My_scale’.

2. No body fat data measured when weighing

User must be bare foot to measure the body fat.

Make sure your feet and the scale are both dry.

Scale not finishing weighing when the number display is flashing (Keep standing on

the scale around 10 second until the number on the display stops flashing).

Bluetooth is not turned on.

Bluetooth is paired with a difference scale.

Try to add some water onto the feet bottom once the feet is too dry;

When one scale be connected to more than 2 phone device, need to make sure the

devices which are not for using be turn off first;

3. The scale is producing inconsistent weight.

Check whether the scale is on a hard, flat surface.

Check each sensor foot on the back to make sure nothing is stuck to the bottom of it.

Remove the batteries to restart the scale;

4. The App is display the incorrect fat-muscle ratio

The body parameter setting is incorrect, check to make sure you entered the correct

gender, height, and age.

5. How do I re-calibrate the scale after moving it or change the batteries?

Step on the scale to turn it on. Let it automatically drop to 0.0kg to calibrate.

6. The scale does not turn on

Remove the batteries and put it back. Make sure to insert the batteries in the correct

direction;

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Welland T9 Kasutusjuhend

Welland T9 Kasutusjuhend

teistes keeltes

Muud dokumendid