Ashdown AAA-300-210T Kasutusjuhend

Ashdown
Kaubamärk
Ashdown
Mudel
AAA-300-210T
Tüüp
Kasutusjuhend

See juhend sobib ka

Thank you for purchasing your Ashdown Engineering Amplier and welcome to the family!
We really think you’ve made the right choice and know that this amplier will give you years
of great tone and service. It is a machine though and needs to be looked after, please read
through this user manual which will help you get the most out of your new Amp and keep it
running as long as some of our happiest and very famous customers.
Please register this product online so we can make sure we give you years of customer
support through our friendly in-house service centre.
Here is where you need to visit to register your product:
http://www.ashdownmusic.com/register
THANK YOU
REGISTER ONLINE
AAA - Front Panels
MID
MID
AAA-30-8
AAA-60-10
T
AAA-120-15T
AAA-300-210T
Ashdown Ampliers reserve the right to change specications without notice. E & O E. All contents © Ashdown 2016.
AAA - Rear Panels
AAA-30-8
AAA-60-10
T
AAA-120-15T
AAA-300-210T
FRONT PANEL FACILITIES:
Input
A single input jack socket is provided for your instrument. This is a high im-
pedance input designed to perfectly match the impedance of the pick-ups on a
passive bass. It also has sufcient headroom available to allow active basses
to be used. Use the input gain control to adjust for the sensitivity of your in-
strument (AAA-30 ONLY). Two sockets are provided on other models for both
LOW and HIGH impedance instruments separately, simply use the input knob
to set the desired input signal to suit your instrument.
APPTEK
The AppTek socket provided allows a person to connect their device using an
amp simulator on an iPhone or iPad. We have developed with Agile Partners
Amp-Kit so you are able to use an ABM modeled pre amp and ABM-810 cab
through your practice amp and also expand this with an array of available
pedals. The App/FX Mix roatary contaol on the AAA-120 & AAA-300 models
allows you to blend the level of FX or AppTek being fed to the amp, working as
a wet signal mix control.
E.Q.
This passive EQ has bass, middle and treble tone controls (AAA-30 & AAA-60
ONLY). The AAA-120 & AAA-300 utilize a wider range of EQ Bass, Lo-Mid,
Hi-Mid, Treble along with a variable Mid Sweep for re-ning the mid range of
your tone. There are also Vintage/Modern Lows & Highs switches on the front
panel this alters the frequency response of the EQ for further tone-shaping
capabilities.
DRIVE
This adds tube-emulated overdrive as a tube amp would when adding gain,
from slight grit to full on overdrive. This is foot-switchable on the AAA-120 and
AAA-300 models via a signal latching foot-switch sold separately.
Ashdown Ampliers reserve the right to change specications without notice. E & O E. All contents © Ashdown 2016.
Headhopnes
A headphone jack socket is provided (located on the front of the AAA-30
& AAA-60 and on the rear of the others) to allow stereo headphones to be
plugged into the amplier for silent practice. Just use the speaker mute switch
located on the rear of the amp.
LINE IN
A single balanced line input is provided (located on the front of the AAA-30 &
AAA-60 and on the rear of the others) for play along practice. Used in conjunc-
tion with the Headphones socket for silent practice (Also see, AUX MIX).
AUX MIX
Set the level of your Backing Track by using the ‘AUX MIX’ Rotary control
provided.
MASTER
Use the output level control to adjust the playing volume of the amplier.
REAR PANEL FACILITIES:
DI
There is a balanced post EQ Di tted to all models expect the AAA-30, This
provides a balanced out put for connecting to a PA or for recording purposes.
This is located on the rear on the AAA-120 & AAA-300 and on the top panel of
the AAA-60.
FX Send & Return
On the AAA-120 & AAA-300 models there is an FX loop tted for use with FX
pedals, a send and return is provided.
Speaker & Tweeter Mute
There is a speaker mute switch tted to all models for use in silent practice.
On the AAA-120 and AAA-300 there is also a tweeter mute switch to cut the
tweeter if desired.
Speaker Out
There is an 8Ohm min load speaker out put located on the rear of the AAA-60
and also the AAA-300 for use with an 8 Ohm extension speaker only.
Fused mains inlet socket
This is for connection of the unit to your countries mains power supply. Please
ensure that the type and rating of mains fuse marked on the rear panel is used
when this is replaced.
Power switch
The power to the unit is turned on with the rear panel power switch. A power
led on the front panel will light to indicate that the amplier is switched on.
SPECIFICATION:
AAA-30-8
Output Power 30watts rms into 8 ohms
Speaker Unit 1 x 8” Ashdown Driver
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Passive Bass, Middle, Treble.
AAA-60-10T
Output Power 60watts rms into 8 ohms
Speaker Unit 1 x 10” Ashdown Driver & Tweeter
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Passive Bass, Middle, Treble.
AAA-120-15T
Output Power 120watts rms into 8 ohms
Speaker Unit 1 x 15” Ashdown Driver & Tweeter
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Bass, Hi-Mid, Lo-Mid, Treble & Variable Mid Sweep
AAA-300-210T
Output Power 300watts rms into 8 ohms
Speaker Unit 2 x 10” Ashdown Driver & Tweeter
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Bass, Hi-Mid, Lo-Mid, Treble & Variable Mid Sweep
NOTES:
We recommend using Neutrik speakon cables to connect your
Ashdown Rootmaster to your selected cabinet.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Ashdown AAA-300-210T Kasutusjuhend

Ashdown
Kaubamärk
Ashdown
Mudel
AAA-300-210T
Tüüp
Kasutusjuhend
See juhend sobib ka
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid