1
Quick Start Guide
A190 Wireless DECT Headset
v2019001
A
Delivery content · Lieferumfang ·
Contenu de la boîte · En la caja · Contenuto della confezione
Quick
Start Guide
A190
10 hrs
Charging the battery
·
Akku laden
·
Charger la batterie
·
Ricarica della batteria
·
Carga de la batería
C
Connecting
·
Anschließen
·
Connecter
·
Conectar
·
Collegare
B
Features
·
Caractéristiques
·
Caratteristiche
· Características
D
LED
AUX key (power ON)
·
AUX-Taste ·
Bouton AUX ·
PulsanteAUX ·
Botón AUX
MUTE microphone
·
Mik rofon stummschalten ·
Dés activer le microphone ·
Disattivare microfono ·
Desactivar micrófono
VOLUME-
Lautstärke
-
Volumen-
Loudspeaker in back
Lautsprecher hinten
Haut-parleur à l'arrière
Altoparlante nella parte posteriore
Altavoz en la parte posterior
Microphone
·
Mik rofon ·
Microphone ·
Microfono ·
Micrófono
Registering the headset to M-series base stations
1. Set up an extension for the headset on the base station and put the base station into registration
mode for handsets. Please refer to the base station manual on how to do it. The headset's IPEI
number is on the box label.
2. Press the CALL key and the two VOLUME keys simultaneously for more than 5 seconds to put the
headset into registration mode, as indicated by short blue flashes and the voice prompt announcing
"registering."
3. If the headset has been registered, the voice prompt announces "heaset subscribed," and the
headset has been added to the extensions page (Fig. 1). It can now receive calls at the assigned
extension number.
Fig. 1
2
CALL key ·
Anr uftaste ·
Bouton d'appel ·
Pulsante di chiamata ·
Botón de llamada
VOLUME-
Lautstärke
+
Volumen+
3
Pairing the headset with a handset
It is possible to pair the headset with a handset registered at the base station. The headset will get the
same extension number as the handset, and you can assign its former extension number to another
terminal.
1. On the extension page, click on the IPEI of the handset. The handset page opens.
2. From the drop-down box of Paired Terminal, select the terminal idx of the headset (Fig. 2).
Fig. 2
3. Click Save. The headset is now registered with the same extension number as the handset and can
also be used to call numbers dialed on the handset's keypad.
Fig. 3
Using the headset
• Turning headset on: press AUX and both VOLUME keys for 5 seconds or place
handset in charger.
• Turning headset o: press AUX and both VOLUME keys for 5 seconds.
Idle state
• Increase ringer volume: press VOLUME+ key .
• Decrease ringer volume: press VOLUME- key .
• Disable ringer audio (turn on silent mode): press VOLUME+ key for 2 seconds .
• Enable ringer audio (turn o silent mode): press VOLUME- key for 2 seconds .
• Enter voice prompt menu: press AUX key .
Active state
Ringing calls can be accepted on the handset or on the headset and then picked up on the other device.
• Accept/terminate call: press CALL key (1x) .
• Reject incoming call: press CALL key twice (2x) .
• Put call on hold/retrieve held call: press CALL key for 2 seconds .
• Increase volume of call: press VOLUME+ key .
• Decrease volume of call: press VOLUME- key
• Mute and unmute microphone: press MUTE key .
• Call waiting.
◦ Press CALL key to accept incoming and simultaneously terminate active call .
◦ Press CALL key twice to reject the incoming call .
◦ Press CALL key for 2 seconds to put the active call on hold and accept the second call .
◦ Switch active and held call: Press CALL key for 2 seconds .
Swap call between headset and handset
Note: If the call is muted, it will be unmuted, if the call is on hold, it will be retrieved.
• Headset picking up from handset: Press the CALL key on the headset to continue the call on the
headset .
• Handset picking up call from headset: Press the CALL key or the SPEAKERPHONE key on the hand-
set to continue the call on the handset's receiver or speakerphone, respectively.
LED indications
Color LED indication Status
Green Short flash followed by long flash Power up
Green Long flash followed by short flash Power down
Blue Flashing fast Registration, ongoing
Blue Long flash Registration completed
Red Long flash Registration failed
None Deregistered
Blue Blinking slowly Idle, connected
Red Blinking slowly Idle, out of range
Green Flashing fast Incoming call
Green Flashing fast
2nd incoming call, call active, silent
mode on
Green
Single short flash. Notification of call
via audio in HS
2nd incoming call, call active, silent
mode o
Green Single short flash In call
Red Short flash Low battery
Red Steady on Battery charging, low bat
Green Long flash Battery charging
Green Steady on Battery charging, full
Purple Steady on Menu
For further information, see wiki.snom.com/A190.
Snom Technology GmbH
Wittestr. 30 G
13509 Berlin,Germany
4
© 2019 Snom Technology GmbH
All Rights Reserved.
-
1
-
2
-
3
-
4
