EN
BRAINZ POWERBAR SPEAKER
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
What you need
• USB-C cable (included)
• Mobile phone with Bluetooth (not included)
How to charge the Powerbar speaker
Connect the supplied cable to the speaker (DC5V port on the back of the speaker) and connect the USB side to a
power source. The speaker will now charge.
This is how to set it up
Slide the ON/OFF button to the right on the back of the speaker to turn it on. The speaker will appear under your
new Bluetooth connections on your phone as Brainz Speaker S65. By clicking on it, your phone connects and the
speaker is ready for use.
Volume
To increase the volume, press and hold the + button on the top of the speaker. To decrease the volume, repeat
with the - button.
Pause music
Press the pause button once to pause the music (button with triangle/ 2 dashes). Repeat to resume music.
Next/ previous song
Press the + button once to go to the next track. Repeat with the - button to go to the previous track.
AUX
To use the AUX port, plug one end of your AUX cable into your phone and the other end into the speakers AUX
port. The speaker will now automatically switch to AUX and disable Bluetooth. The AUX port is found on the back
of the speaker under the ON/OFF button.
USB
Thanks to the USB access port, you can play MP3 files. To do this, insert a USB into the access port. This access
port is also found on the back of the speaker.
SD
Thanks to the SD access port, you can play MP3 files. To do this, insert an SD card into the access port. This
access port is also found on the back of the speaker.
Switch off
Slide the switch button on the back of the speaker to the left to turn it off.
Please note:
Do not use a charger with a higher voltage than suitable for this product.
Please note:
This item is not dishwasher safe. Clean with a wet cloth.
These instructions apply to article numbers 38572 & 38573.
For more information about this product, please visit www.brainz-electronics.nl