Aastra Meridian 9116 Kasutusjuhend

Kategooria
Telefonid
Tüüp
Kasutusjuhend

See käsiraamat sobib ka

You can read the recommendations in the user guide, the technical guide or the installation guide for AASTRA 9116. You'll find
the answers to all your questions on the AASTRA 9116 in the user manual (information, specifications, safety advice, size,
accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual AASTRA 9116
User guide AASTRA 9116
Operating instructions AASTRA 9116
Instructions for use AASTRA 9116
Instruction manual AASTRA 9116
Your user manual
AASTRA 9116
Manual abstract:
The list begins with the newest call and ends with the oldest. The oldest call is automically deleted to make room for the new calls when the list becomes full.
See Callers List on page 15 for more information Use with the network features such as Call Waiting and Three Way Calling (ßash is also referred to as link).
Displays the last number dialed out on the telephone. See Using Redial on page 9 for more information. Dials the displayed telephone number, automatically
activates the handsfree mode if the handset is not picked up. Use to store numbers and names in Directory, in memory keys and to access and save Option
feature settings. Removes individual entries in the Directory, or Callers List. Erases memory key information. Use to access the eight two-touch memory
positions.
Memory keys store numbers, names and features. See Memory B C D K L H M keys on page 17. 4 Basic Installation Basic Installation 1. Connect the Handset
2.Connect the Cords Attach one end of the coiled handset cord Plug one end of the telephone cord into on the back of the telephone and the to the handset and
the other end to the handset port on the back of the tele- other end to the phone jack.
Connect the small end of the power phone. adaptor to the port on the back of the Route the handset cord along the groove telephone, and plug the other end
into leading off the side of the telephone as an electrical outlet. shown in the illustration. 1 3. Attach the Stand for Desk Mount If you plan to mount the
telephone on the wall, you do not need to attach the stand.
Lower the stand as shown below into the slots on the back of the telephone. Slide the stand in the direction shown below until it clicks into the locked position.
5 Basic Installation 6. Attach the cords to the telephone stand Route the cords along the groove on the telephone stand as shown in the illustration. 7. Mount
the telephone on the wall It is recommended that you use a wallmounting plate which is available through your telephone company or a local retailer. You
will Þnd it easier to wall-mount the telephone if you purchase one short 20 cm (8") telephone cord and use it in place of the long telephone cord. Coil the
telephone cord(s) into the space provided on the back of the telephone. Line up the keys on the wall mounting plate with the key holes on the back of the
telephone. Place the telephone onto the wall mounting plate, and then push down to secure the telephone into place.
6 Basic Installation 8. Insert the number card on your telephone Write your telephone number on the number card. Place the number card into the slot
underneath the handset cradle on the on the telephone. 9. Insert the Memory key card on your telephone This card contains the feature names for the
dedicated keys and label identiÞcation spaces for the eight programmable memory keys. Place the card into the memory key card slot on the telephone.
Gently bend the clear plastic lens Gently bend the clear plastic lens and place it on and place it on top of the number top of the memory key card in the slot.
card in the slot. For more information on programming memory keys, refer to Memory keys on page 17 To avoid potential electrical shock hazard to
personnel or damage to the telephone, use only the manufacturer-supplied equipment and installation procedures. SpeciÞcally, use only 4 conductor modular
teledapt plug/cords with this product, and an AC transformer that is CSA/UL or CSA-NRTL/C approved Class 2 level C, rated as follows: For North
American Markets AC voltage 110-120V, Input: 120VAC, 60Hz, 10W and Output: 9V DC, 300mA.
Substitution of non-approved equipment will void the Aastra Telecom Inc., warranty. For more information about installation and safety concerns, call
1-800-574-1611. 7 Making and Answering Calls Making a call With your telephone you can make and answer calls using your handset or Qfor speakerphone
capabilities. To make a regular call: 1.
2. Lift the handset or press Q . Enter the number using the dial pad. Making and Answering Calls Answering a Call To answer a call: 1. Lift the handset or
press Q.
When you subscribe to the Caller ID service from your telephone company, Caller ID information is sent from the telephone company to your 9116 telephone
between the Þrst and second ring..
Your user manual
AASTRA 9116
Powered by TCPDF (www.tcpdf.org)
  • Page 1 1
  • Page 2 2

Aastra Meridian 9116 Kasutusjuhend

Kategooria
Telefonid
Tüüp
Kasutusjuhend
See käsiraamat sobib ka

teistes keeltes