Aastra Clearspan 6739i Kasutusjuhend

Bränd: Aastra

Mudel: Clearspan 6739i

Kategooria: Telefonid

Tüüp: Kasutusjuhend

Aastra 6739i

SIP Telephone at the OpenCom 1000

Communications System

User Guide

Welcome to Aastra

Thank you for choosing this Aastra product. Our product meets the strictest

requirements with regard to quality and design.

The following operating instructions will assist you in using your Aastra 6739i and

answer most of the questions that may arise.

If you require further technical support or information about other Aastra

products, please refer to our website at http://www.aastra.de or

http://www.aastra.com. It provides additional notes and tips on the product.

We hope you enjoy using your Aastra 6739i.

Contents

Aastra 6739i SIP Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Key Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Distinctive Features of the Communications System . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using the Aastra 6739i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Telephoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Calling with Selective Line Seizure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Holding a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Taking a Call from Another Terminal (Take) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Accepting a Call for Another Terminal (Pick-up). . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Three-Party Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Enquiry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Toggling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Transferring Call to Another Subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Other Device Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Handsfree / Open-Listening Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Mute Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Adjusting Volume Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Call Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Using a Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Speed Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Caller Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Call Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Message Waiting (MWI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Voicebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Busy Lamp Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Flexible Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Log Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Log In. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

ACD Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Configuring the Aastra 6739i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Automatic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Web Configurator of the OpenCom 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Aastra 6739i Web Configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Programming on the Aastra 6739i. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Function Keys Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Settings via the Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Aastra 6739i Restarting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Deleting a Local Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Restoring Factory Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Manually Configuring an IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Aastra 6739i Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Picture ID Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Aastra 6739i SIP Telephone

The Aastra 6739i is a Voice over IP (VoIP) telephone in accordance with the interna-

tionally standardised SIP standard (Session Initiation Protocol). Connected to the

communications system OpenCom 1000 you have additional comfort functions

available.

Aastra 6739i

A special feature of the Aastra 6739i is its high resolution backlit touchscreen

display and full VGA resolution (640 x 480 pixels). Using the latest in technology,

navigation menus are shown on this display for accessing the complete range of

functions available on this SIP telephone.

The Aastra 6739i has three dedicated trunk keys / / with LED.

Along with the 14 dedicated keys – e.g. for the “Forward”, “Conference”,

“Hold”features – the device offers 55 user-specific softkeys on the display which

can have functions of the OpenCom 1000 communication system assigned to

them (please refer to page 2).

The key extensions Aastra M670i or Aastra M675i offer additional function keys for

the Aastra 6739i:

■ Aastra M670i: offers 36 function keys

■ Aastra M675i: offers 20 softkeys respectively programmable on three levels

(total of 60 storage locations)

Aastra 6739i SIP Telephone

Up to three key extensions can be connected: three key extensions of either the

M670i type or three of the M675i type. Key extensions cannot be combined on the

OpenCom 1000 communications system.

Key Description

The following table explains the 14 dedicated keys of the Aastra 6739i.

Aastra M670i

Aastra M675i

Aastra 6739i

Keys Key Description and Function

Options key: accesses the Options List menu card

(please refer to Settings via the Options Menu

starting on page 27).

Caller key: opens the list of missed calls (please refer

to Caller Lists starting on page 12).

Phone book key: opens the phone book of the

OpenCom 1000 communications system (please

refer to Phone book starting on page 14).

Services key: activates/deactivates call protection

(DND: Do Not Disturb).

Conference key: establishes a conference

Transfer key: transfers the current call to another

subscriber

Aastra 6739i SIP Telephone

Function keys: These keys are softkeys on the touchscreen display. The functions

of these keys are configured and labelled with the OpenCom 1000

communications system. These keys offer access to individually configurable

system functions such as e.g. configuring call forwarding, executing speed dialling,

displaying a busy lamp field or accessing the phone book of the communications

system.

Depending on the function programmed the respective state is signalled via the

softkey lighting up red or blinking red (please refer to the chapter Programming

on the Aastra 6739i starting on page 24).

Hold key: puts the current call on hold. Press this key

once again to retrieve the call on hold.

Redial key: redials previously dialled numbers.

Goodbye key: ends an active call or exits an open

menu page without saving any changes made.

Mute key: turns the microphone on or off.

Volume control keys: adjusts the volume for the

handset, ringer and speaker.

Voice mail key: opens the list of voicebox messages

(please refer to Voicebox starting on page 16).

Trunk keys: connect you to a specific line or accept a

call which is signalled on the line.

Handsfree key: activates the Handsfree function for

making and receiving calls without picking up the

handset. When a headset is connected, a call can be

accepted and ended using this key.

Aastra 6739i

Keys Key Description and Function

Aastra 6739i SIP Telephone

Softkeys on the touchscreen display of the Aastra 6739i

1 Softkeys with programmed functions (function keys)

2 Level key for switching levels: This softkey enables programming up to

55 softkeys (11 softkeys on 5 levels). Press this softkey multiple times to reach

the desired key level.

3 state-dependent softkeys: These softkeys offer state-dependent functions

which you can activate, e.g. holding a call while making a call.

About this Manual

This manual describes how to use an Aastra 6739i SIP telephone which is con-

nected to an OpenCom 1000 communications system. If you require further infor-

mation, please consult the following Aastra 6739i manuals:

■ Aastra 6739i SIP IP Phone Installation Guide (print version included with the

product): describes features, controls and possible connections of your SIP

telephone.

■ Aastra 6739i SIP IP Phone User Guide: describes the most frequently used

telephony features for the telephone user.

PQRS

GHI

ABC

JKL

TUV

DEF

MNO

WXYZ

.....

Aastra 6739i SIP Telephone

■ Aastra SIP IP Phone Administrator Guide: contains extensive information for

the administrator and describes how to configure the SIP telephone within the

network.

These manuals may also be downloaded as PDF files from the Aastra website.

Please note the information on configuration and operation of SIP telephones in

the OpenCom 1000 communications system documentation.

Distinctive Features of the Communications System

When you operate an Aastra 6739i on the OpenCom 1000 communications

system, some functions differ from how they are described in the installation

guide and in the user guide.

This applies especially to functions which are provided locally on the device as

well as via the OpenCom 1000 communications system. In these cases, the func-

tions provided by the communications system are used. The corresponding local

device menus will not appear then.

■ The Aastra 6739i does not execute its own call forwarding. Use the call

forwarding function of the OpenCom 1000 communications system (please

refer to Call Forwarding starting on page 15).

■ The Aastra 6739i does not manage a local caller list nor a local phone book.

Configure function keys instead to access the callers list (Caller Lists starting on

page 12) and the phone book (please refer to Phone book starting on page 14)

of the OpenCom 1000 communications system.

■ The Aastra 6739i has a separate Web interface. If the administrator of the

OpenCom 1000 communications system so desires, this can be activated (see

Programming on the Aastra 6739i starting on page 24). Using this Web

interface, you can possibly programme function keys concurrently and thus

delete or overwrite the keys and functions configured via the OpenCom 1000

communications system.

If a function key has been programmed using the web interface of the

Aastra 6739i, for example, this cannot be overwritten through a configuration

from the OpenCom 1000 communications system. In order to cancel

concurrent programming, delete the programming either via the Aastra 6739i

Web interface or delete the local configuration on the Aastra 6739i (please

refer to Deleting a Local Configuration starting on page 27).

Using the Aastra 6739i

Telephoning

Making Calls

1. In order to establish a connection,

– pick up the handset or

– press the handsfree key , to make the following call in the handsfree

mode (see Handsfree / Open-Listening Mode starting on page 11).

2. Dial a call number:

– Enter the call number using the number keys. Press the Dial softkey.

– Or: Press the redial key to call back a previously dialled call number. Use

the navigation keys to browse the list. Press the softkey

next to the desired entry or pick up the handset.

– Or: Press the function key with the phone book function (please refer to

Phone book starting on page 14). This function is for selecting a call number

from the phone book of the OpenCom 1000 communications system.

The display shows a picture (photo) of the called subscriber if an image has been

saved on the OpenCom 1000 communications system (please refer to page 31).

Calling with Selective Line Seizure

If multiple trunk keys are configured for your telephone, you can seize a line selec-

tively.

1. Press a trunk key / / to seize a specific line.

2. Dial a call number (see page 6).

Note

If the administrator has linked a trunk key / / with a SIP user

account, you will be calling under the call number of the SIP user account. If the

trunk key is not linked, the call number of trunk key 1 is used.

Using the Aastra 6739i

Answering a Call

An incoming call is signalised via ringer, a blinking trunk key and the blinking red

LED indicator to the upper right. The display shows a picture (photo) of the person

you are speaking with if an image has been saved on the OpenCom 1000 commu-

nications system (please refer to page 31).

To accept the call, you:

■ pick up the handset or

■ press the Answer softkey or

■ press the blinking trunk key / / or

■ press the handsfree key to accept the following call in the handsfree

mode (see page 11).

During call signalling you can:

■ press the Silence softkey to mute the ringer. The person calling continues

to hear the ringing tone.

■ press the Reject softkey to reject the call. The caller continues to hear the

ringing tone.

Note

Press a function key with the call protection function (see Call Protection starting

on page 11). This function rejects the incoming call. The caller hears the busy

tone.

Holding a Call

You can briefly interrupt an ongoing call:

1. Press the hold key or the Hold softkey. The person calling now hears

music on hold.

2. Press the hold key once again or press the Hold softkey to continue

the call.

Using the Aastra 6739i

Taking a Call from Another Terminal (Take)

You can accept an ongoing call from another terminal on your Aastra 6739i and

continue it there. To be able to do so, your telephone and the other terminal have

to have the same internal call number. To do so, a Take function key must be con-

figured on the Aastra 6739i (see Web Configurator of the OpenCom 1000 starting

on page 20).

To accept the call on the Aastra 6739i you:

■ pick up the handset and press the Take function key or

■ – when the handset is not picked up – press the Take function key to accept

the call in the handsfree mode (please refer to page 11).

Accepting a Call for Another Terminal (Pick-up)

You can accept a call for another telephone in your Pickup group. To do so, a Pick-

up function key must be configured on the Aastra 6739i (see Web Configurator of

the OpenCom 1000 starting on page 20).

Another telephone in your Pickup group is ringing. When your telephone is idle,

the call number / the name of the caller and the called pick-up group member are

displayed. To accept the call, you:

■ pick up the handset and press the Pick-up function key or

■ – when the handset is not picked up – press the Pick-up function key to accept

the call in the handsfree mode (please refer to page 11).

If you are telephoning and would like to accept a call using Pickup …

1. Press an unassigned trunk key, e.g. trunk key 2 .

The person calling is put on hold and now hears music on hold.

2. Press the Pick-up function key.

3. You can also toggle back and forth between callers or initiate a conference

with both callers (please refer to page 9 also).

Ending a Call

To end a call you do as follows:

■ Put down the handset.

■ press the goodbye key .

Using the Aastra 6739i

Three-Party Calls

You are making a call, e.g. on the trunk key 1 , its corresponding LED indicator

is lit. You can now forward the call, execute an enquiry, switch back and forth

between two subscribers (“toggle”) or set up a conference. You can use any

available trunk key / / for three-party conference calls.

Enquiry

While telephoning, you can make an enquiry to another subscriber.

Note

The enquiry function cannot be used to transfer calls on SIP telephones.

Alternatively, use the Transfer softkey or the transfer key .

1. Press an unassigned trunk key, e.g. trunk key 2 . Alternatively press the

Hold softkey and then press an available trunk key.

You hear the internal dialling tone. The person calling is put on hold and now

hears music on hold.

2. Now dial the call number of the subscriber desired and make the enquiry call.

3. Press the goodbye key to terminate the enquiry call.

4. Press the trunk key where the first caller is waiting or press the

Hold softkey. You are now connected with the caller on hold once again.

Note

If after ending the enquiry call you put down the handset, after a few seconds

you will automatically be called back with the connection on hold.

Toggling

While you are conducting an enquiry call, the first caller is put on hold (see

page 9). Now you can toggle between callers (switch back and forth).

1. Press the trunk key (e.g. ) of the caller waiting currently. The other caller is

put on hold. The LED indicator of the trunk key of the respectively held caller

blinks during this process. The held caller hears music on hold.

2. Press the trunk key of the caller waiting to switch to that caller. The other caller

is now put on hold.

Using the Aastra 6739i

3. Ending toggling: Press the goodbye key to terminate the current call.

4. Then press the trunk key where the other caller is waiting or press the

Hold softkey. You are now connected with the caller on hold once again.

Transferring Call to Another Subscriber

1. Press the Transfer softkey or the transfer key .

You hear the internal dialling tone. The person calling is put on hold and now

hears music on hold.

2. Dial the call number of the internal subscriber desired.

– Transferring a call with notification: When the subscriber answers,

announce the call transfer. Press the Transfer softkey or the transfer

key .

– Transferring a call without notification: When you wish to wish to transfer

the call without notification, wait for the ringing tone. Press the

Transfer softkey or the transfer key . The caller on hold now hears the

ringing tone of the transfer destination and waits for the call to be accepted.

Conference

You can speak with two callers simultaneously in a so-called “three-party con-

ference”.

1. You are speaking with someone on the telephone.

2. Press the Conf softkey or the conference key. Your caller is put on

hold.

3. Dial the call number of the conference subscriber desired.

4. When the second caller answers, announce the conference. Press the

Conf softkey or the conference key.

You are now connected with both callers in a three-party conference. The

display shows the list of conference partners.

5. Do the following to end the conference:

– Disconnecting individual subscribers from the conference: Press the

softkey of the caller. This ends the connection to the caller selected.

– Ending a conference: Put down the handset or press the goodbye key

to end the conference (connection to both callers).

Using the Aastra 6739i

Other Device Functions

Handsfree / Open-Listening Mode

You can make a call in the handsfree mode, e.g. to let anyone present in the room

listen in. To do so, press the Loudspeaker key before or during a call. The

speaker is switched on. The red LED indicator next to the handsfree key lights up.

Press the key once again to switch the speaker off.

Mute Function

If you do not want the caller to listen in to what, e.g. you are discussing with

someone in the room, you can temporarily mute the telephone. During a call press

the mute key or the Mute softkey. The microphone is switched off. The

red LED indicator next to the key blinks and your caller can no longer hear you.

Press the mute key once again or the Mute softkey to switch the micro-

phone back on.

Adjusting Volume Level

You can adjust the volume of the ringer, of the handset or of the speaker with the

volume keys .

■ During call signalling you can adjust the volume of the ringer.

■ While making a call, you adjust the volume of the handset or – in the handsfree

mode – the volume of the speaker.

Call Protection

You can configure a do not disturb function key on the Aastra 6739i (see Web

Configurator of the OpenCom 1000 starting on page 20).

1. Press the do not disturb (DND) function key to activate call protection.

The function key lights up red. Callers now receive the busy signal. Internal

callers with system terminals also receive No Answer on the display.

2. Press the function key once again to deactivate the call protection function.

Using the Aastra 6739i

Using a Headset

Instead of using a handset, a headset can be connected to the Aastra 6739i. You

can press the handsfree key in this case in order to accept and end calls.

You can configure whether to use the headset or the speaker for handsfree oper-

ation via the menu Options list > Audio (see Settings via the Options Menu

starting on page 27).

Note

Establishing a call can be delayed with SIP telephony. When using a headset, e.g.

you should wait a second before you begin to speak.

Speed Dialling

You can configure function keys with speed dialling destinations on the

Aastra 6739i (see Web Configurator of the OpenCom 1000 starting on page 20).

■ Pick up the handset and press the function key where the speed dialling

destination is programmed.

alternatively – when you wish to call in the handsfree mode:

■ Press the function key – with the handset down – where the speed dialling

destination is programmed.

Caller Lists

You can configure a function key with a caller list function (see Web Configurator

of the OpenCom 1000 starting on page 20). Use this function key to access the

caller lists managed on the OpenCom 1000 communications system. The function

key blinks red when the caller list contains no entries.

1. Press the function key with the caller list function.

The calls no reply list appears.

2. Use the navigation keys to go to the desired entry.

3. To call the caller back, pick up the handset or press the softkey.

The call number is called. The display shows a picture (photo) of the called

subscriber if an image has been saved on the OpenCom 1000 communications

system (please refer to page 31).

Using the Aastra 6739i

Further options:

– To show detailed information on the entry selected, press the softkey.

The call number of the caller, number of calls from this call number and date of

the last call is displayed. You can now call the caller back as described in the

previous step.

– Press the Answered calls softkey to switch to the list of answered calls. Press

the No reply softkey to return to the list of no reply calls.

– Press the Backspace softkey to delete the entry selected.

– Press the Configuration softkey to configure the caller list. Use the

navigation keys to get to the desired input line or option on the

menu cards. Press the softkey to return to the previous menu card.

Note

Only when more than one call number has been configured

for the Aastra 6739i: selecting the call number or trunk key;

determines the line for which the caller list is to be

configured

The following menu cards appear:

int./ext.: the setting determines which calls – only internal, only external or all

calls – are to be saved in the list.

No reply: the setting determines whether and which call situations are to be

saved in the list.

Answered Calls: the setting determines whether an additional list of answered

calls is available.

4. Press the goodbye key to exit the menu card.

Note

The list of dialled call numbers is displayed with the redial key .

Using the Aastra 6739i

Phone book

You can configure on the Aastra 6739i a function key with a “phone book”

function (directory, see Web Configurator of the OpenCom 1000 starting on

page 20). Use this function key to access the phone books managed on the

OpenCom 1000 communications system.

1. Press the “Phone Book” function key (directory) or also the phone book

key.

The Phonebook menu card appears.

2. Activate the Name field by pressing on it. A softkey keyboard appears on the

display. If you wish to open the entire phone book press the Submit softkey.

Alternatively you can search the phone book for the desired entry:

– Enter one or more initial letters of the phone book entry desired by pressing

softkeys on the keyboard.

–Use the Shift, Abc, Abc2, 123, &%* softkeys to make the desired character

appear on the keyboard.

– To correct a mistaken entry use the Bksp (backspace) softkey.

– Press the Hide softkey to hide the keyboard.

3. Confirm using the Enter softkey.

A list of the corresponding phone book entries of the OpenCom 1000

communications system will appear.

4. Use the navigation keys to go to the desired entry.

If there are multiple call numbers saved in the phone book (Office, Mobile or

Private) these are shown on the display. Press on the display line showing the

desired call number.

5. To call the selected call number, pick up the handset or press the softkey.

If you would like to conduct the following call in the handsfree mode, press the

handsfree key and then the Dial softkey.

The call number is called. The display shows a picture (photo) of the called

subscriber if an image has been saved on the OpenCom 1000 communications

system (please refer to page 31).

Using the Aastra 6739i

Call Forwarding

You can configure on the Aastra 6739i a function key with a call forwarding

function (see Web Configurator of the OpenCom 1000 starting on page 20). The

following options are available:

■ A function key was programmed with a fixed configured call forwarding.

– in the OCW the call forwarding/submit key function was configured, the

Infoscreen option was deactivated during configuration): Press the function

key to activate or deactivate call forwarding. The function key lights up red

when call forwarding is activated.

– A function key was programmed with a fixed configured call forwarding (in

the OCW the call forwarding/submit key function was configured, the

Infoscreen option was activated during configuration): Press the function key

to show the forwarded call number, the forwarding destination and the status

on the display. Press the on/off softkey to activate or deactivate call

forwarding.

■ A function key was programmed with a call forwarding menu (in the OCW the

call forwarding/menu key function was configured).

Press the function key to show the call forwarding menu. Use the navigation

keys to get to the desired input line or option on the menu

cards. Press the softkey to return to the previous menu card.

The following menu cards appear:

– select the call number or trunk key to be forwarded (only when more than

one call number was configured for the Aastra 6739i).

– select the unconditional, busy or no reply option

– select the option off (to deactivate), Target callno. (for entering the call

number manually), Attendant (for call forwarding to the central office), or

voicebox (for call forwarding to the IVM)

– after entry: select the Internal, External or int.+ext. call type

Press the Goodbye key to exit the menu card display.

Using the Aastra 6739i

Message Waiting (MWI)

The Aastra 6739i can receive short messages.The OpenCom 1000 communications

system also has a configuration determining whether or not you are informed of

incoming e-mails.

You can configure a Message Waiting function key (see Web Configurator of the

OpenCom 1000 starting on page 20) which enables to read messages on the tele-

phone display. The function key blinks red when there are new messages.

1. Press the Message Waiting function key.

2. Use the navigation keys to go to the desired entry.

3. To show detailed information on the entry selected, press the softkey. The

text, date and time of the message is shown.

Further options:

– To call back the sender press the softkey or pick up the handset.

– Press the Backspace softkey to delete the selected entry.

– Press the Tone -> on / Tone -> off softkey to switch on/off the acoustic

signalling of incoming messages.

Voicebox

The OpenCom 1000 communications system provides you with a voicebox which

serves as an “answering machine” if desired. To operate the voicebox, it is recom-

mended to configure a key with the function Voice mail (see Web Configurator of

the OpenCom 1000 starting on page 20). Activating or deactivating the voicebox

is done via call forwarding to a voicebox call number (please refer to Call For-

warding starting on page 15).

Any time there are new messages on your OpenVoice voicebox, the Aastra 6739i

display shows the symbol (upper left) and below it the number of voicebox

messages received. The Voice mail softkey as well as the voice mail key blink

red.

1. Press the “voice message” function key (Voice mail) or also the voice mail

key.

The display shows the list of received messages.

Leht laadib ...

Aastra Clearspan 6739i Kasutusjuhend

Bränd: Aastra

Mudel: Clearspan 6739i

Kategooria: Telefonid

Tüüp: Kasutusjuhend

Laadige alla PDF

aruanne

teistes keeltes

English: Aastra Clearspan 6739i User manual

Aastra Clearspan 6739i Kasutusjuhend

Aastra Clearspan 6739i Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid