Bruksanvisning och underhållsinstruktioner
Bruks- og vedlikeholdsmanual
Vejledning i brug og rengøring
Käyttö- ja huolto-ohjeet
AKZM 693
EN1
YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT
This manual and the appliance itself provide important safety warnings, to be read and observed at all times.
All safety warnings give specific details of the potential risk present and
indicate how to reduce risk of injury, damage and electric shock
resulting from improper use of the appliance. Carefully observe the
following instructions:
- The appliance must be disconnected from the power supply before
carrying out any installation work.
- Installation and maintenance must be carried out by a qualified
technician, in compliance with the manufacturer’s instructions and
local safety regulations. Do not repair or replace any part of the
appliance unless specifically stated in the user manual.
- Power cable replacement must be carried out by a qualified
electrician. Contact an authorized service centre.
- Regulations require that the appliance is earthed.
- The power cable must be long enough for connecting the
appliance, once fitted in its housing, to the main power supply.
- For installation to comply with current safety regulations, an all-
pole disconnect switch with minimum contact gap of 3 mm must
be utilized.
- Do not use multiple plug adaptors if the oven is fitted with a plug.
- Do not use extension leads.
- Do not pull the power supply cable.
- The electrical components must not be accessible to the user after
installation.
- If the surface of the induction plate is cracked, do not use it and
switch off the appliance to avoid the possibility of electric shock
(only for models with induction function).
IMPORTANT SAFETY INSTRUCTIONS
This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.
All safety warnings are preceded by the danger symbol and the following terms:
DANGER
Indicates a hazardous situation which, if not avoided, will cause serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could cause serious injury.
EN2
- Do not touch the appliance with any wet part of the body and do
not operate it when barefoot.
- This appliance is designed solely for use as a domestic appliance for
cooking food. No other type of use is permitted (e.g.: heating
rooms). The Manufacturer declines all responsibility for
inappropriate use or incorrect setting of the controls.
- This appliance can be used by children from 8 years and above and
persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
- The accessible parts of the appliance may become very hot during
use. Young children should be kept away from the appliance and
supervised to ensure that they do not play with it.
- The appliance and its accessible parts become hot during use. Care
should be taken to avoid touching heating elements. Children less
than 8 years old shall be kept away, unless continuously supervised.
- During and after use, do not touch the heating elements or interior
surfaces of the appliance - risk of burns. Do not allow the appliance
to come into contact with cloths or other flammable materials until
all the components have cooled sufficiently.
- At the end of cooking, exercise caution when opening the
appliance door, letting the hot air or steam exit gradually before
accessing the oven. When the appliance door is shut, hot air is
vented from the aperture above the control panel. Do not obstruct
the vent apertures.
- Use oven gloves to remove pans and accessories, taking care not to
touch the heating elements.
- Do not place flammable materials in or near the appliance: a fire
may break out if the appliance is inadvertently switched on.
- Do not heat or cook sealed jars or containers in the appliance.
The pressure that builds up inside might cause the jar to explode,
damaging the appliance.
- Do not use containers made of synthetic materials.
EN3
- Overheated oils and fats catch fire easily. Always remain vigilant
when cooking foods rich in fat and oil.
- Never leave the appliance unattended during food drying.
- If alcoholic beverages are used when cooking foods (e.g. rum,
cognac, wine), remember that alcohol evaporates at high
temperatures. As a result, there is a risk that vapours released by the
alcohol may catch fire upon coming into contact with the electrical
heating element.
- Never use steam cleaning equipment.
- Do not touch the oven during the pyrolysis cycle. Keep children
away from the oven during the pyrolysis cycle (only for ovens with
Pyrolysis function).
- Only use the temperature probe recommended for this oven.
- Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface, which may
result in shattering of the glass.
- Ensure that the appliance is switched off before replacing the lamp
to avoid the possibility of electric shock.
- Do not use aluminium foil to cover food in the cooking vessel
(only for ovens with cooking vessel supplied).
- Use protective gloves to perform all unpacking and installation
operations.
Scrapping of household appliances
- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal
regulations. Before scrapping, cut off the power supply cable.
- For further information on the treatment, recovery and recycling of household electrical appliances, contact your
competent local authority, the collection service for household waste or the store where you purchased the appliance.
• After unpacking the oven, check it has not been damaged during transit and make sure that the door shuts properly. In
the event of problems, contact the dealer or the After-sales Service.
• To prevent any damage, only remove the oven from its polystyrene foam base at the time of installation.
• The oven must not be installed in conjunction with a hob.
PREPARING THE HOUSING UNIT
• Kitchen units in contact with the oven must be heat resistant (min 90°C).
• Carry out all cabinet cutting work before fitting the oven in the housing and carefully remove all wood chips and sawdust.
• After installation, the bottom of the oven must no longer be accessible.
• For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.
ELECTRICAL CONNECTION
Make sure the power voltage specified on the appliance dataplate is the same as the mains voltage. The dataplate is on the front
edge of the oven (visible when the door is open).
• Power cable replacement (type H05 RR-F 3 x 1.5 mm
2
) must be carried out by a qualified electrician. Contact an
authorized service centre.
INSTALLATION
EN4
GENERAL RECOMMENDATIONS
Before use:
- Remove cardboard protection pieces, protective film and adhesive labels from accessories.
- Remove the accessories from the oven and heat it at 200° for about an hour to eliminate the smell and fumes from the
insulating materials and protective grease.
During use:
- Do not place heavy objects on the door as they could damage it.
- Do not cling to the door or hang anything from the handle.
- Do not cover the inside of the oven with aluminium foil.
- Never pour water into the inside of a hot oven; this could damage the enamel coating.
- Never drag pots or pans across the bottom of the oven as this could damage the enamel coating.
- Make sure that the electrical cables of other appliances do not touch hot parts of the oven or become trapped in the door.
- Do not expose the oven to atmospheric agents.
Disposal of packing material
The packing material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of the packing must
therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.
Scrapping the product
- This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment
(WEEE).
- By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
- The symbol on the product or on the accompanying documentation indicates that it should not be treated as
domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic
equipment.
Energy saving
- Only pre-heat the oven if specified in the cooking table or your recipe.
- Use dark lacquered or enamelled baking moulds as they absorb heat far better.
- Switch the oven off 10/15 minutes before the set cooking time. Food requiring prolonged cooking will continue to cook even
once the oven is switched off.
- This oven, which is intended to come into contact with foodstuffs, complies with European Regulation ( ) n.1935/2004 and
has been designed, manufactured and sold in conformity with the safety requirements of the “Low Voltage” directive 2006/
95/CE (which replaces 73/23/CEE and subsequent amendments), the protection requirements of “EMC” 2004/108/CE.
The oven does not work:
• Check for the presence of mains electrical power and if the oven is connected to the electrical supply.
• Turn off the oven and restart it to see if the fault persists.
The door will not open:
• Turn off the oven and restart it to see if the fault persists.
• Important: during self-cleaning, the oven door will not open. Wait until it unlocks automatically (see paragraph “Cleaning
cycle of ovens with pyrolysis function”).
The electronic programmer does not work:
• If the display shows the letter “ ” followed by a number, contact your nearest After-sales Service. Specify in this case the
number that follows the letter “ ”.
Before calling the After-Sales Service:
1. See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide“.
SAFEGUARDING THE ENVIRONMENT
DECLARATION OF CONFORMITY
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
EN5
2. Switch the appliance off and back on again it to see if the fault persists.
If after the above checks the fault still occurs, get in touch with the nearest After-sales Service.
Always specify:
• a brief description of the fault;
• the type and exact model of the oven;
• the service number (number after the word Service on the rating plate), located on the right hand edge of the oven cavity
(visible when the oven door is open). The service number is also indicated on the guarantee booklet;
• your full address;
• your telephone number.
If any repairs are required, please contact an authorised After-sales Service (to guarantee that original spare parts will be used
and repairs carried out correctly).
Oven exterior
IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with
the appliance, clean immediately with a damp cloth.
• Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off
with a dry cloth.
Oven interior
IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin enamelled surfaces
and the oven door glass.
• After every use, allow the oven to cool then clean it preferably while it is still warm in order to remove built-up dirt and
stains caused by food residues (e.g. food with a high sugar content).
• Use proprietary oven detergents and follow the manufacturer’s instructions to the letter.
• Clean the door glass with a suitable liquid detergent. The oven door can be removed to facilitate cleaning (see
MAINTENANCE).
• The top heating element of the grill (see MAINTENANCE) can be lowered (some models only) to clean the roof of the oven.
N.B.: during prolonged cooking of foods with a high water content (e.g. pizza, vegetables, etc.) condensation may form
on the inside of the door and around the seal. When the oven is cold, dry the inside of the door with a cloth or sponge.
Accessories:
• Soak the accessories in water with washing up detergent immediately after use, handling them with oven gloves if still
hot.
• Food residues can be easily removed using a brush or sponge.
Cleaning the rear wall and catalytic side panels of the oven (if present):
IMPORTANT: do not use corrosive or abrasive detergents, coarse brushes, pot scourers or oven sprays which could
damage the catalytic surface and ruin its self-cleaning properties.
• Operate the oven empty with the fan-assisted function at 200°C for about one hour
• Next, leave the appliance to cool down before removing any food residue with a sponge.
Cleaning cycle of ovens with pyrolysis function (if present):
This function burns off spatters produced inside the oven during cooking at a temperature of approx. 500°C. At this high
temperature, the deposits turn into a light ash which can be easily wiped away with a damp cloth, when the oven is cool. Do not
select the pyrolysis function after every use, only when the oven is very dirty or produces smoke or fumes while preheating or
cooking.
• If the oven is installed below a hob, make sure that all burners or electric hotplates are switched off during the self-
cleaning (pyrolysis) function.
• Remove all accessories before running the pyrolysis function.
• For optimum cleaning of the oven door, remove the worst soiling with a damp sponge before using the pyrolytic function.
The appliance is equipped with 2 pyrolysis functions:
CLEANING
WARNING
- Never use steam cleaning equipment.
- Only clean the oven when it is cool to the touch.
- Disconnect the appliance from the power supply.
WARNING
- Do not touch the oven during the pyrolysis cycle.
- Keep children away from the oven during the pyrolysis cycle.
EN6
1. Energy-saving cycle (PYRO EXPRESS/ECO): which consumes approximately 25% less energy than the standard cycle.
Select it at regular intervals (after cooking meat on 2 or 3 consecutive occasions).
2. Standard cycle (PYRO): which is suitable for cleaning a very dirty oven.
• In any case, after a certain number of uses and depending on how dirty the oven is, a message on the oven display advises
you to run a self-cleaning cycle.
N.B.: during the pyrolysis function, the oven door will not open; it will remain locked until the temperature inside the
oven has returned to an acceptably safe level.
MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)
1. Remove the side accessory holder grilles (Fig. 1).
2. Pull the heating element out a little (Fig. 2) and lower it (Fig. 3).
3. To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral
supports.
REPLACING THE OVEN LAMP
To replace the rear lamp (if present):
1. Disconnect the oven from the power supply.
2. Unscrew the lamp cover (Fig. 4), replace the lamp (see note for lamp type) and screw the lamp cover back on.
3. Reconnect the oven to the power supply.
To replace the side lamp (if present):
1. Disconnect the oven from the power supply.
2. Remove the side accessory holder grilles, if present (Fig. 1).
3. Use a screwdriver to prise off the lamp cover (Fig. 5).
4. Replace the lamp (see note for lamp type) (Fig. 6).
5. Reposition the lamp cover, pushing it on firmly until it snaps into place (Fig. 7).
6. Refit the side accessory holder grilles.
7. Reconnect the oven to the power supply.
N.B.:
- Only use 25-40W/230V type E-14, T300°C incandescent lamps, or 20-40W/230 V type G9, T300°C halogen lamps.
- The lamp used in the appliance is specifically designed for electrical appliances and is not suitable for household room
illumination (Commission Regulation (EC) No 244/2009).
- Lamps are available from our After-sales Service.
IMPORTANT:
- If using halogen lamps, do not handle with bare hands since fingerprints can damage them.
- Do not use the oven until the lamp cover has been repositioned.
MAINTENANCE
WARNING
- Use safety gloves.
- Ensure the oven is cold before carrying out the following operations.
- Disconnect the oven from the power supply.
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6 Fig. 7
EN7
FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION
1. Control panel
2. Upper heating element/grill
3. Cooling fan (not visible)
4. Dataplate (not to be removed)
5. Light
6. Circular heating element (not visible)
7. Fan
8. Turnspit (if present)
9. Lower heating element (not visible)
10. Door with right-hand opening (left-hand version also available)
11. Runner positions (from 1 to 5, from the bottom)
12. Rear wall
N.B.:
- During cooking, the cooling fan may switch on at intervals in order to minimise energy consumption.
- At the end of cooking, after the oven has been switched off, the cooling fan may continue to run for a while.
- When the oven door is opened during cooking, the heating elements switch off.
ACCESSORIES SUPPLIED
A. WIRE SHELF: the wire shelf can be used to grill food or as a support for pans, cake tins and other ovenproof cooking
receptacles.
B. DRIP TRAY: the drip tray is designed to be positioned under the wire shelf in order to collect fat or as an oven tray for
cooking meat, fish, vegetables, focaccia, etc.
C. TURNSPIT: for even roasting of large pieces of meat and poultry.
The number of accessories may vary according to which model is purchased.
ACCESSORIES NOT SUPPLIED
Other accessories which can be purchased separately from the After-sales Service include baking trays and catalytic panels.
INSTRUCTIONS FOR OVEN USE
Fig.A Fig.B Fig.C
12
5
2
4
8
5
9
11
10
7
6
3
1
1
EN8
INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
The wire shelf and other accessories are provided with a locking mechanism to prevent their accidental removal.
1. Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).
2. Angle the wire shelf when it reaches the locking position “B” (Fig. 2).
3. Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. 3).
4. To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface
enables the accessories to lock in place.
CONTROL PANEL DESCRIPTION
TOUCH KEYS: to use, simply touch the corresponding symbol (a light touch is all that is required).
On/Off (when you press on / off button to turn off the oven an acoustic signal will sound, this sound can not be disabled).
to access the main MENU or return to the start screen
to access the 10 most used functions
to return to the previous screen
and to browse the functions/options and change preset values
to select and confirm settings
to start cooking
LIST OF FUNCTIONS
After switching on the oven, press the symbol and the display will show the following indications.
A. Image for highlighted function
B. Highlighted function can be selected by pressing
C. Other available and selectable functions
D. Description of highlighted function
Fig. 1
Fig. 2 Fig. 3
WARNING
Use oven gloves to remove food after cooking and take care not to touch the inside of the
oven door - risk of burns!
Recipes
Traditional
Specials
Traditional manual
cooking functions
Recipes
Traditional
Specials
Traditional manual
cooking functions
AB
C
D
EN9
FUNCTION DETAILS
After selecting the desired function, press button and the display will show further options and related details.
To move between different areas, use buttons and : the adjustable values are shown in larger, dark grey characters.
Press to select the value, adjust it using buttons and and confirm by pressing button .
USING THE APPLIANCE FOR THE FIRST TIME - LANGUAGE SELECTION AND SETTING
THE TIME
For correct use of the oven, when it is switched on for the first time you will have to select the desired language and set the
correct time.
Proceed as follows:
1. Press : the display will show the list of the first three available languages.
2. Press buttons and to scroll down the list.
3. When the desired language is highlighted, press to select it.
After language selection, the display will flash 12:00.
4. Set the time using buttons and . To scroll through the numbers more quickly, keep the button pressed.
5. Confirm your setting by pressing : the display will show the list of functions.
SELECTING COOKING FUNCTIONS
1. If the oven off press button ; the display will show the cooking functions.
2. To browse the various possibilities, press buttons and : the selectable function is highlighted in dark grey on the
display.
N.B.: for the list and description of functions, see the specific table at page 15 and at page 16.
3. Select the function by pressing button : the cooking settings are shown on the display. If the pre-set values are those
desired, press the start button , otherwise proceed as inidcated above to change them.
SETTING THE GRILL POWER
To change the grill power, proceed as follows:
1. Select TRADITIONAL from the GRILL menu using buttons and and confirm by pressing .
2. If the preset power level is that desired, press to start cooking.
3. If you wish to set a different power level, scroll the list with buttons and and confirm by pressing button .
Zone 1
Zone 2
Zone 3
Zone 4
Roast Chicken
180°C
No Preheat
00:00
COOK TIME
00:00
END TIME
Recipes
Traditional
Specials
Traditional manual
cooking functions
Forced Air
Convection Bake
Fast preheat
Traditional manual
cooking functions
Grill
High
No Preheat
--:--
COOK TIME
--:--
END TIME
Grill
Medium
No Preheat
--:--
COOK TIME
--:--
END TIME
Grill
has been set
EN10
TEMPERATURE ADJUSTMENT
1. Check that the temperature value (zone 1) is selected and press button to select the parameter to be changed: the
temperature values flash.
2. Use buttons and to change to the desired value.
3. Press button to confirm and then press . The display indicates which shelf food should be placed on.
4. Press to start cooking.
The set temperature can also be changed during cooking by following the same procedure.
5. At the end of cooking, the end of cooking message is displayed. At this point the oven can be switched off by pressing ,
or cooking can be prolonged by pressing . When switched off, the display shows the cooling bar which indicates the
temperature inside the oven.
PREHEATING THE OVEN
If you wish to preheat the oven before inserting food, change the oven’s default selection as follows:
1. Using buttons and , move the cursor to preheating.
2. Press button to select the setting: “No Preheating” flashes on the display.
3. To change the setting, press or : the display will show “Preheating”.
4. To confirm your choice, press button .
FAST PREHEATING
If you wish to preheat the oven quickly before inserting food, change the oven’s default selection as follows:
1. Select the fast preheating function using buttons and .
2. Confirm by pressing : the settings are shown on the display.
3. If the proposed temperature is that desired, press , otherwise proceed as described in previous paragraphs to change it. An
acoustic signal will sound when the oven has reached the set temperature. At the end of preheating, the oven automatically
selects the conventional function .
At this point food can be placed in the oven for cooking.
4. If you wish to set a different cooking function, press and select the desired function.
SETTING COOKING TIME
This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by
the selected function, after which the oven switches off automatically.
1. To select the function, position the cursor next to “COOK TIME” using buttons and .
2. Press button to select the setting; “00:00” flashes on the display.
3. Change the value using buttons and to display the desired cooking time.
4. Confirm the selected value by pressing button .
Conventional
180°C
No Preheat
--:--
COOK TIME
--:--
END TIME
Conventional
180°C
Preheat
--:--
COOK TIME
--:--
END TIME
Please insert food
press when done.
Conventional
Preheating
116°
TEMPERATURE
Conventional
Oven is Hot!
180°
TEMPERATURE
Forced Air
Cooking
180°C
00:29
COOK TIME
19:30
END TIME
Forced Air
Finished!
180°C
00:00
COOK TIME
19:30
END TIME
Forced Air
180°C
No Preheat
00:00
COOK TIME
19:30
END TIME
Forced Air
180°C
No Preheat
00:30
COOK TIME
19:30
END TIME
EN11
BROWNING
At the end of cooking, with certain functions, the display indicates the possibility of browning the surface of your dish. This function
can only be used when cooking time has been set.
At the end of cooking time, the display shows “^ to prolong, to brown”. Press button , and the oven starts a 5 minute
browning cycle. This function can only be used once after cooking.
SETTING END OF COOKING TIME / START DELAYED
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only
be done once cooking time has been set. This setting is only possible when pre-heating is not required for the selected
function.
After setting cooking time, the display shows the end of cooking time (for example 19:45). To delay the end of cooking time, and
thus also the cooking start time, proceed as follows:
1. Position the cursor next to the end of cooking time using buttons and .
2. Press button to select the setting: the end of cooking time flashes.
3. To delay the end of cooking time, use buttons and to set the desired value.
4. Confirm the selected value by pressing button .
5. Press button . The display indicates which shelf food should be placed on.
6. Press button to activate the function. The oven will start cooking after a period of time calculated so as to finish
cooking at the set time (for example, in the case of a dish which requires a cooking time of 30 minutes, if the end of
cooking time is set to 21.00, the oven will begin cooking at 20.30).
N.B.: during the interval before cooking starts, the oven can in any case be switched on by pressing button .
At any time during cooking, set values (temperature, grill setting, cooking time, end of cooking time) can be changed
using buttons and and button as described in previous paragraphs.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta.
The maximum time which can be set is 1 hour 30 minutes.
1. With the oven off, press button : the display will show “00:00:00”.
2. Press buttons and to select the desired time.
3. Press button to start the countdown. When the set time has elapsed, the display will show “00:00:00” and an acoustic
signal will sound. At this point the time can be prolonged, proceeding as described above, or the timer can be deactivated
by pressing button (the time of day will be shown on the display).
Browning
In progress
00:05
COOK TIME
19:36
END TIME
Browning
Finished!
00:00
COOK TIME
19:36
END TIME
Cooking nished at 19:30
^ to prolong, ✓ to brown
Browning nished at 19:36
Forced Air
Start Delayed
180°C
01:14
COOK TIME
21:00
END TIME
Forced Air
Start Delayed
180°C
00:00
COOK TIME
21:00
END TIME
Forced Air
Cooking
180°C
00:29
COOK TIME
21:00
END TIME
Forced Air
180°C
No Preheat
00:30
COOK TIME
19:45
END TIME
Forced Air
180°C
No Preheat
00:30
COOK TIME
21:00
END TIME
00:0:00
(HH) (MM) (SS)
Press
^
to set, ✓ to start
^
00:20:00
(HH) (MM) (SS)
Press
^
to set, ✓ to start
^
00:19:59
(HH) (MM) (SS)
Press
^
to set, ✓ to start
^
EN12
RECIPES
Thanks to “6th Sense” technology, the oven offers 30 pre-set recipes with ideal cooking temperatures.
Simply follow the recipe as regards ingredients and the method of preparation. Then, proceed as follows:
1. Select “RECIPES” using buttons and and confirm with .
2. Select the dish to be cooked from the proposed list.
3. Confirm the selected dish using button .
4. Select the desired recipe using buttons and .
5. Confirm by pressing : the display shows the approximate cooking time.
6. Put the food in the oven and press button . The display indicates which shelf food should be placed on.
7. Press button to start cooking. To delay the start of cooking, see the relevant paragraph.
N.B.: some dishes must be turned or stirred half way through cooking: the oven will emit an acoustic signal and the
display will indicate what action is required.
The initial cooking time displayed is merely for guidance: it can be prolonged automatically during cooking.
Shortly before cooking time finishes, the oven prompts you to check that the food is cooked to your satisfaction. If it is not, extra
time can then be added manually using the buttons and .
SHORTCUTS
1. Press button : the display shows the 10 most used functions.
2. To scroll down the list, use buttons and .
3. Press to select the desired function.
4. To change the settings of the selected function, proceed as shown in the previous paragraphs.
Chicken Breasts
Roast Chicken
See cookbook
for description
Fish
Poultry
Vegetables
Press ✓ to
view recipes
Roast Chicken
Cooking
00:44
COOK TIME
21:00
END TIME
Poultry
has been set
Roast Chicken
00:45
ESTIMATING
21:00
END TIME
SENSE
Roast Chicken
has been set
Recipes
has been set
Insert food on level 3
press when done.
Settings
Recipes
Traditional
Fully automatic
6th Sense Recipes
Cooking nished at 19:30
Press ^ to prolong
Please turn food
press when done.
Cooking nearly nished
Please check on food
Maxi Cooking
Lasagna
Chicken Breasts
Your most used
cooking functions
EN13
SETTINGS
1. To change some display settings, select “SETTINGS” from the main menu using buttons and .
2. Confirm by pressing : the display shows which settings can be changed (language, volume of acoustic signal, display
brightness, time, energy saving function).
3. Select the setting you wish to change using buttons and .
4. Press button to confirm.
5. Follow the instructions of the display to change the settings.
6. Press button ; a message appears on the display confirming your selection.
N.B.: when the oven is switched off, if the ECOMODE (energy saving) function is selected (ON), the display switches off after a
few seconds. If, on the other hand, the function is not selected (OFF), after a few seconds the display is merely dimmed.
KEY-LOCK
This function can be used to lock the control panel buttons.
To activate it, press and at the same time for at least 3 seconds. If activated, the functions of the buttons are locked and
a message is shown on the display. This function can also be activated during cooking. To deactivate it, repeat the above
procedure. When the key-lock function is activated, the oven can be switched off using button .
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 15.
To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:
1. Select “Cleaning” from the main menu using buttons and .
2. Press button : “Pyro Express Cleaning” and “Pyro Cleaning” appear on the display.
3. Select one of the two cycles using buttons and confirm with : the display shows the duration and end time
of the selected cycle (end time can be delayed by following the same procedure indicated in paragraph “SETTING
COOKING TIME/DELAYED START”).
4. Press button : the display shows the instructions to be followed in order to start the cycle. After following each
instruction, confirm with button .
5. Upon the final confirmation, the oven starts the cleaning cycle and the door is automatically locked: a warning appears on
the display for around three seconds. Immediately afterwards, the display shows a progress bar indicating the cleaning
cycle progress.
N.B.: If the oven door is opened before it is unlocked automatically, a warning message appears on the display. When
the door is reclosed, the cycle must be started again by pressing button .
Language
Time
Volume
Appliance and
display settings
Cleaning
Settings
Recipes
Appliance and
display settings
Settings
has been set
Specials
Cleaning
Settings
Step-by-step
guidance
Pyro Express
Pyro
3 hour high
temperature cleaning
Cleaning
-03:00
TIME
17:02
END TIME
1/3
Please switch o cooktop
above oven and press ✓
2/3
Please remove all accessories
from the oven and press ✓
1/3
Remove stains from glass
with moist sponge, press ✓
Cleaning
in progress
-02:59
TIME
17:33
END TIME
Door will be locked
during cleaning
Please close the door
EN14
6. At the end of the cycle, the relative message flashes on the display, after which the cooling bar indicates cooling in
progress. The residual temperature is indicated on the display. The door remains locked until the temperature inside the
oven has returned to an acceptably safe level: the display shows the time of day.
Cleaning
Finished
-00:00
TIME
17:33
END TIME
102°C
RESIDUAL HEAT
18:37
EN15
FUNCTION DESCRIPTION TABLE
MAIN MENU
SETTINGS
Setting the display (language, time, brightness, volume of acoustic signal, energy saving
function).
RECIPES
Selecting 30 different pre-set recipes (see enclosed recipe booklet). The oven automatically
sets the optimum cooking temperature, function and time. It is important to follow the
instructions given in the recipe book regarding preparation, accessories and which oven
shelf to use.
AUTOMATIC CLEANING
To burn off spatters produced during cooking with an extremely high temperature cycle
(approx. 500°). Two auto-cleaning cycles are available: a shorter cycle (Pyro Express) and a
complete cycle (Pyro). The shorter cycle should be used at regular intervals, while the
complete cycle is best used only in the case of very dirty ovens.
TRADITIONAL See TRADITIONAL FUNCTIONS.
SPECIALS See SPECIALS.
TRADITIONAL FUNCTIONS
FAST PREHEATING To preheat the oven rapidly.
CONVENTIONAL
To cook any kind of dish on one shelf only. Use the 3rd shelf. To cook pizza, savoury pies and
sweets with liquid fillings, use the 1st or 2nd shelf. The oven does not have to be preheated.
GRILL
To grill steak, kebabs and sausages; to cook vegetables au gratin and toast bread. Place food
on the 4th or 5th shelf. When grilling meat, use the drip tray to collect the cooking juices.
Position it on the 3rd/4th shelf, adding approx. half a litre of water. The oven does not have to
be preheated. During cooking the oven door must remain closed.
TURBO GRILL
To roast large joints of meat (legs, roast beef, chickens). Position the food on the middle
shelves. Use the drip tray to collect the cooking juices. Position it on the 1st/2nd shelf, adding
approx. half a litre of water. The oven does not have to be preheated. During cooking the
oven door must remain closed. With this function you can also use the turnspit, if provided.
FORCED AIR
To cook a variety of food requiring the same cooking temperature on several shelves
(maximum three) at the same time (e.g.: fish, vegetables, cakes). This function can be used to
cook different foods without odours being transferred from one food to another. Use the 3rd
shelf to cook on one shelf only, the 1st and 4th to cook on two shelves, and the 1st, 3rd and
5th to cook on three shelves. The oven does not have to be preheated.
CONVECTION BAKE
To cook meat and pies with liquid filling (savoury or sweet) on a single shelf. Use the 3rd
shelf. The oven does not have to be preheated.
EN16
SPECIALS
DEFROSTING
To speed up defrosting of food. Place food on the middle shelf. Leave food in its packaging in
order to prevent it from drying out on the outside.
KEEP WARM
For keeping just-cooked food hot and crisp (e.g: meat, fried food or flans). Place food on the
middle shelf. The function will not activate if the temperature in the oven is above 65°C.
RISING
For optimal rising of sweet or savoury dough. To safeguard the quality of proving, the
function will not activate if the temperature in the oven is above 40°C. Place the dough on
the 2nd shelf. The oven does not have to be preheated.
CONVENIENCE
Cooking ready meals kept at room temperature or from refrigerated cabinets (biscuits, liquid
cake mixtures, muffins, first courses and bakery products). This function gently cooks all food
quickly; it can also be used to reheat cooked food. Follow the instructions on the food
packaging. The oven does not have to be preheated.
MAXI COOKING
To cook large joints of meat (above 2.5 kg). Use the 1st or 3rd shelves, depending on the size
of the joint. The oven does not have to be preheated. It is advisable to turn the meat over
during cooking for more even browning. It is best to baste the meat every now and again to
prevent it from drying out.
FROZEN
FOOD
Lasagna
The function automatically selects the ideal cooking temperature and mode for 5 different
types of ready frozen food. Use the 2nd or 3rd shelf. The oven does not have to be preheated.
Pizza
Apple strudel
French fries
Bread
Custom The temperature can be set from 50 to 250°C to cook other types of product.
EN17
COOKING TABLE
Recipe Function Pre-
heating
Shelf
(from bottom)
Temperature
(°C)
Time
(min)
Accessories
Leavened cakes
CONVENTIONAL
- 2 / 3 160-180 30-90 Cake tin on wire shelf
FORCED AIR
- 1-4 160-180 30-90
Shelf 4: cake tin on wire shelf
Shelf 1: cake tin on wire shelf
Filled pies
(cheesecake, strudel,
apple pie)
CONVECTION BAKE
- 3 160-200 35-90
Drip tray/ baking tray or cake
tin on wire shelf
FORCED AIR
- 1-4 160-200 40-90
Shelf 4: cake tin on wire shelf
Shelf 1: cake tin on wire shelf
Biscuits/Tartlets
CONVENTIONAL
- 3 170-180 20-45 drip tray or baking tray
FORCED AIR
- 1-4 160-170 20-45
Shelf 4: wire shelf
Shelf 1: drip tray or baking tray
FORCED AIR
- 1-3-5 160-170 20-45
Shelf 5: oven tray on wire shelf
Shelf 3: oven tray on wire shelf
Shelf 1: drip tray or baking tray
Choux buns
CONVENTIONAL
- 3 180-200 30-40 drip tray or baking tray
FORCED AIR
- 1-4 180-190 35-45
Shelf 4: oven tray on wire shelf
Shelf 1: drip tray or baking tray
FORCED AIR
- 1-3-5 180-190 35-45
Shelf 5: oven tray on wire shelf
Shelf 3: oven tray on wire shelf
Shelf 1: drip tray or baking tray
Meringues
CONVENTIONAL
- 3 90 110-150 drip tray or baking tray
FORCED AIR
- 1-4 90 140-160
Shelf 4: oven tray on wire shelf
Shelf 1: drip tray or baking tray
FORCED AIR
- 1-3-5 90 140-160
Shelf 5: oven tray on wire shelf
Shelf 3: oven tray on wire shelf
Shelf 1: drip tray or baking tray
Bread / Pizza /
Focaccia
CONVENTIONAL
-1 / 2190-250 20-50 drip tray or baking tray
FORCED AIR
- 1-4 190-250 25-50
Shelf 4: oven tray on wire shelf
Shelf 1: drip tray or baking tray
FORCED AIR
- 1-3-5 190-250 25-50
Shelf 5: oven tray on wire shelf
Shelf 3: oven tray on wire shelf
Shelf 1: drip tray or baking tray
Savoury pies
(vegetable pie, quiche
lorraine)
CONVECTION BAKE
- 3 180-190 40-55 Cake tin on wire shelf
FORCED AIR
- 1-4 180-190 45-60
Shelf 4: cake tin on wire shelf
Shelf 1: cake tin on wire shelf
FORCED AIR
- 1-3-5 180-190 45-60
Shelf 5: cake tin on wire shelf
Shelf 3: cake tin on wire shelf
Shelf 1: drip tray or baking tray
+ cake tin
Vols-au-vent / Puff
pastry crackers
CONVENTIONAL
- 3 190-200 20-30 drip tray or baking tray
FORCED AIR
- 1-4 180-190 20-40
Shelf 4: oven tray on wire shelf
Shelf 1: drip tray or baking tray
FORCED AIR
- 1-3-5 180-190 20-40
Shelf 5: oven tray on wire shelf
Shelf 3: oven tray on wire shelf
Shelf 1: drip tray or baking tray
Lasagne / Baked pasta
/ Cannelloni / Flans
CONVENTIONAL
- 3 190-200 45-55 Oven tray on wire shelf
Lamb / Veal / Beef /
Pork 1 Kg
CONVENTIONAL
- 3 190-200 80-110
Drip tray or oven tray on wire
shelf
EN18
Chicken / Rabbit /
Duck 1 Kg
CONVENTIONAL
- 3 200-230 50-100
Drip tray or oven tray on wire
shelf
Turkey / Goose 3 Kg CONVENTIONAL - 2 190-200 80-130
Drip tray or oven tray on wire
shelf
Baked fish / en
papillote (fillet,
whole)
CONVENTIONAL
- 3 180-200 40-60
Drip tray or oven tray on wire
shelf
Stuffed vegetables
(tomatoes,
courgettes,
aubergines)
CONVECTION BAKE
- 2 180-200 50-60 Oven tray on wire shelf
Toast GRILL - 5 High 3-5 Wire shelf
Fish fillets / steaks GRILL - 3-4 Medium 20-30
Shelf 4: wire shelf (turn food
halfway through cooking)
Shelf 3: drip tray with water
Sausages / Kebabs /
Spare ribs /
Hamburgers
GRILL
- 4-5 Medium - High 15-30
Shelf 5: wire tray (turn food
halfway through cooking)
Shelf 4: drip tray with water
Roast chicken 1-1.3 Kg TURBO GRILL
- 1-2 Medium 55-70
Shelf 2: wire tray (turn food two
thirds of the way through
cooking)
Shelf 1: drip tray with water
- 1-2 High 60-80
Shelf 2: rotisserie
Shelf 1: drip tray with water
Roast Beef rare 1 Kg TURBO GRILL - 3 Medium 35-45
Oven tray on wire shelf (turn
food two thirds of the way
through cooking if necessary)
Leg of lamb / Shanks TURBO GRILL - 3 Medium 60-90
Drip tray or oven tray on wire
shelf (turn food two thirds of
the way through cooking if
necessary)
Baked potatoes TURBO GRILL - 3 Medium 45-55
Drip tray or baking tray (turn
food two thirds of the way
through cooking if necessary)
Vegetable gratin TURBO GRILL - 3 High 10-15 Oven tray on wire shelf
Lasagna & Meat FORCED AIR - 1-4 200 50-100
Shelf 4: oven tray on wire shelf
Shelf 1: drip tray or oven tray
on wire shelf
Meat & Potatoes FORCED AIR - 1-4 200 45-100
Shelf 4: oven tray on wire shelf
Shelf 1: drip tray or oven tray
on wire shelf
Fish & Vegetables FORCED AIR - 1-4 180 30-50
Shelf 4: oven tray on wire shelf
Shelf 1: drip tray or oven tray
on wire shelf
Recipe Function Pre-
heating
Shelf
(from bottom)
Temperature
(°C)
Time
(min)
Accessories
Leht laaditakse ...
Leht laaditakse ...
Leht laaditakse ...
Leht laaditakse ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
teistes keeltes
- English: Whirlpool AKZM 693/MR/L User guide
Seotud paberid
-
Whirlpool AKZM 656/IX Kasutusjuhend
-
Whirlpool AKZM 7820/IX Kasutusjuhend
-
Bauknecht BLPM 8110/PT Kasutusjuhend
-
-
-
-
-
Whirlpool 400011543529 Kasutusjuhend
-
-
