Philips DCB2272/05 Quick Installation Guide

120

Wall mounting instructions

Drill holes on wall at hole

positions marked.*

Note for mounting

To secure the mounting on wall, concrete wall is required.

Use screws to mount the main unit on the wall

1. Use this sheet as a template. Mark the position where you want to hang the unit on the wall (as shown

above) and then drill two 6mm diameter holes.

2. Secure the 2 dowels and 2 screws (both supplied) in the holes respectively. Leave a gap of 5 mm

between the head of the screw and the wall.

3. Hang the unit on the fastening screws.

DCB2272_05_Wall Mounting_V1.0

Laadige alla PDF