SofaBaton SofaBaton R2 Kasutusjuhend

Kaubamärk
SofaBaton
Mudel
SofaBaton R2
Tüüp
Kasutusjuhend
Press the desired button on the SofaBaton R2,
the red LED will blink rapidly. Place the
SofaBaton R2 head to head (about 1 inch apart)
from your original remote control. Then press the
button to be learned on the original remote
control continuously, until the green LED light
flashes 3 times, indicating that the SofaBaton R2
has successfully learned the button function from
the original remote control. Repeat this step for
other buttons.
The R2 remote consists of two parts. The upper
part is the programing section, while the lower part
is an integrated Roku remote, which functions as a
standalone Roku remote. You can use this part to
control your Roku streaming devices. Please note
that: Buttons on this section does not have
programing capability.
For buttons on the programing section, including
those two volume buttons on the side, you can
program them using your existing remotes, such as
those for your TV or A/V receiver. Please follow the
instructions on next section of this manual to
program your R2 remote.
Upon completion of above programming, please
test out the buttons on SofaBaton R2 to see if
they work as expected. If not, please try above
steps again.
R
R
R
R
R
R
2
Programing
Section
Standalone
Roku Remote
AAA 1.5V
AAA 1.5V
AAA 1.5V
OK
+
vol
-
+
ch
-
prev
mute
1 2 3
4 5 6
7 8 9
0
Red Light Blinks
Press
Green Light Blinks
Press & hold
1
2
For better demonstration,
please click the YouTube links below:
https://youtu.be/bSVV3O9GnoQ
  • Page 1 1

SofaBaton SofaBaton R2 Kasutusjuhend

Kaubamärk
SofaBaton
Mudel
SofaBaton R2
Tüüp
Kasutusjuhend
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid