IM017
www.scarlett.ru SL-HB43F70
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Before connecting the appliance for the first time check that voltage indicated on the rating label
corresponds to the mains voltage in your home.
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes
than described in this instruction manual.
Do not use outdoors.
Always unplug the appliance from the power supply before cleaning and when not in use.
To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliances by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not leave the appliance switched on when not in use.
If the power cord is damaged it should be replaced by the manufacturer or authorized servicing center or
qualified professional for safety reasons.
Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning
appliance in the nearest service center only.
Keep the cord away from sharp edges and hot surfaces.
Do not pull, twist, or wrap the power cord around the appliance.
When you have finished, before extracting the products and tips, unplug the appliance and wait
until the motor.
WARNING:The blades are extremely sharp and therefore dangerous. Handle with caution!
WARNING: it is prohibited to overfill the unit or use it without ingredients. Do not exceed the continuous
operating time.
Never place hot ingredients into the processor (> 70 ºC).
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product design without prior
notice, unless such changes influence significantly the product safety, performance, and functions.
Production date mentioned on the unit and/or on the packing materials and documentations.
PREPARATION FOR OPERATING
Prior to initial use wash all removable parts with warm water with cleansing agent and dry up carefully.
Wipe the outside of the motor base with moist tissue.
It is strongly prohibited to immerse the motor base into any liquids and/or to clean it with water.
IMMERSION BLENDER
This unit is ideal for making cream soups, sauces and dressings, baby food, and also for blending various
cocktails.
Place the immersion blender on the motor base.
To prevent splashing, immerse the blender into products to be blended prior to switching it.
CHOPPING BLADE / MINI-CHOPPER
Mini-chopper is ideal for chopping greenery and vegetables, cheese, majority of nuts, dried fruits. Hard
products, such as meat, onion, carrots, need to be cut before processing. Nutshells must be removed,
meat must be separated from bones and tendons.
The ice chopper can be used for chopping ice.
When chopping ice, fill the container not more than to 1/3 of its volume, and the ice pieces cannot be
larger than 2х2 cm in size.
Caution! The chopping blade is very sharp! Hold the blade by the top plastic area only!
Place the blade on the central finger in the jar.
Add ingredients into the jar.
Cover the jar with the drive. Cover the jar with the drive. To fasten the drive, align the drive locks with the
jar slots.
Place the motor base into the jar drive until tightened.
While chopping, hold the motor base with one hand, accessory jar – with the other hand.
When finished, remove the motor base first.
Then remove the jar drive.
Remove the blade carefully.
At this point you may remove chopped ingredients from the jar.
ACESSORY FOR WHISKING / LIQUID PRODUCTS BLENDING
Use the whisk for creaming, eggbeating, desserts blending. Never use this accessory for kneading.
Insert the accessory into adapter and place them on the motor base.
Prior to start processing, immerse the whisk into the jar with ingredients. Start processing at low speed.