Vertical Aastra 53i Quick Reference Manual

Bränd: Vertical

Mudel: Aastra 53i

Kategooria: IP-telefonid

Tüüp: Quick Reference Manual

See käsiraamat sobib ka

1 Lift the handset, OR press ( ) on models

9112i and 9133i)

For external calls:

2 When you hear dial tone, enter the external

access code (such as 9.)

3 Enter the phone number.

- OR -

For internal calls:

Enter the extension.

Call Return

Calls back the number answered on your primary line. Call

Return does not return calls from external phone numbers.

Press Call Return, OR 69.

Redial

Redial will place a call to the last phone number you dialed

from the phone. Even if you dialed digits while connected

to a call, the system will only keep track of the last phone

number you dialed.

Press Redial.

1 Lift the handset, OR press ( on models

9112i and 9133i).

2 Press the associated line appearance key while

the line is ringing to connect the call.

Call Pickup

Answer an incoming call on another extension within your pick-

up group.

Extension

1Press Pickup, OR 75.

2 Dial the extension number, as necessary.

Group

Press 74.

Night Answer

Use the Night Answer feature, to manually redirect all inbound

calls to the Vertical Wave system to a predetermined

destination.

• Your system administrator can configure any on- or off-

premise phone number as the destination.

Press 85 to turn on Night Answer.

Cancel

Press 86 to turn off Night Answer.

MAKING CALLS

ANSWERING CALLS

SIP PHONE

FEATURE CODE REFERENCE

Call Park

Directed . . . . . . . . Flash + 66 + ext

Retrieval. . . . . . . . . . . . . 65 + ext

Self . . . . . . . . . . . . . . . . Flash + 64

Retrieval. . . . . . . . . . . . . 65 + ext

System . . . . . . . . . . . . . Flash + 62

Retrieval. . . . . . . . . . . . . 63 + slot

Call Pickup

Extension.. . . . . . . . . . . . . 75 + ext

Group . . . . . . . . . . . . . . . . . . . . 74

Call Return . . . . . . . . . . . . . . . . . 69

Centrex. . . . . . . . . . (in future release)

Conference. . . . . . . . . . . Flash + 71

Connect Party. . . . . . . . . . . . . . 71

Reconnect to Conference . . . 72

Do Not Disturb. . . . . . . . . . . . . . 41

Cancel . . . . . . . . . . . . . . . . . . . 42

Forward . . . . . . . . . . . . . . 43 + dest

Cancel . . . . . . . . . . . . . . . . . . . 44

Hold . . . . . . . . . . . . . . . . . . . . . Flash

Intercom . . . . . . . . . . . . . . . . . . . 82

Log Incident. . . . . . . . . . . . . . . . .

Night Answer

Activate. . . . . . . . . . . . . . . . . . . 85

Deactivate . . . . . . . . . . . . . . . . 86

Page . . . . . . . . . . . . . . . . . . . . . . . 11

Page Group . . . . . . . . 12 + group no

System Speed Dial . . . . . 89 + code

Put the current call on hold while you use other phone features.

While on an active call:

1 Press Hold ( on models 9112i and 9133i,

on models 5000i).

2 Press the key corresponding to the line at which the

call was placed on hold to reconnect.

NOTE

You can also use Call Park features to place calls on

hold. Refer to Wave Phone User’s Guide for details.

Place a call on hold while you dial the destination extension,

then transfer the call.

Blind

Transfer a call without announcing the call to the recipient.

With a party on the line:

1 Press ( on models 5000i).

2 Enter the destination extension.

3 Press

and/or hang up to complete the transfer.

Supervised

Place a call on hold while you dial the destination extension,

then announce the call to the recipient before transferring.

With a party on the line:

1 Press ( on models 5000i).

2 Enter the destination extension.

3 Press the Dial softkey and wait for an answer.

4 Announce the call.

5 Press and hang up to complete the transfer.

Redirect your call from your primary line to another extension or

phone number.

NOTE

The Forward feature will behave differently depending

on whether or not your Forward key is programmed

with a target phone number.

Internal Calls

1 Press Forward, OR 43, then dial the extension

number to which you want calls forwarded.

2 Enter the extension number to which you want to

forward calls.

External Calls

1 Press Forward, OR 43.

2 Enter the external access digit(s) - usually a 9.

3 Enter the phone number to which you want to

forward calls.

• If you enter an international phone number, you

must enter a at the end of the number.

• If you are prompted for a password, enter your

Voicemail password, and press .

Canceling Call Forwarding

Press Forward, OR 44 to cancel call forwarding.

PLACING CALLS ON HOLD

TRANSFERRING CALLS

FORWARDING CALLS

VERTICAL SIP PHONES: 9133i, 9143i, 9112i,

Edge 5000i, 480i/480CT, and Aastra 53i/55i/57i

QUICK

REFERENCE

GUIDE

Release 2.0 Service Pack 1 - April 2011

Feature Key Identifiers

Feature keys invoke application features. The following features

are available on your phone by default.

NOTE

Your SIP phone features may vary depending on the

model and on how your Wave phone system is set up.

Review the Wave Phone User Guide or contact your

phone System Administrator for more information.

Conf ( )

Establishes server based conference of up to four conferees.

Goodbye ( )

(also known as End Call on models 9112i and 9133i)

Releases the current call the same as hanging up the handset.

Hold ( on 9112i and 9133i models / on Aastra 5

series models / on 5000i models)

Icom ( on model 480i/480CT)

Performs a voice call to another extension.

Mute ( on 480i/480CT and Aastra 5 series models)

When your phone is muted, you can hear the caller but the

caller cannot hear you.

Options ( on Aastra 5 Series)

Provides access to a list of configurable options.

Redial ( or softkey on Vertical models / on Aastra 5

Series models)

Places a call to the last number you dialed.

Transfer ( or on models 5000i)

Places a call on hold while you dial and connect to the

destination extension.

Line Status Indicators

Models 480i/480iCT, 9133i, and Aastra 53i

An LED next to the line appearance button indicates the

status of that line.

Models 480i/480iCT, and Aastra 53i/55i

An icon in the display next to a line appearance softkey

indicates the status of that line.

Model 9112i

The status light for the single line is located at the top right

corner of the phone:

If the line status light is: The line status is:

Off Idle (no call activity)

Flashing quickly Call is ringing

Solid Call is connected

Flashing slowly Call is on hold

Icon: If the icon is: The line status is:

Solid Idle (no call activity)

Flashing Call is ringing

Solid Call is connected

Flashing Call is on hold

If the line status light is: The line status is:

Off Idle (no call activity)

Flashing quickly Call is ringing

Flashing slowly New voice message

INTRODUCTION (continued)

Intercom

Make calls from your phone to another extension within

your phone system.

Model 480i/480CT

1Press Intercom ().

2 Dial the extension.

3Press Intercom (), OR press Goodbye (

also known as End Call on models 9112i and

9133i) to end the call.

Models 9112 and 9133

1 Dial the extension

- OR -

Press the desired line button and dial the

extension.

Page

Send a Page to all users connected to your system

through the PA system.

Page the Entire System

1 Press Intercom ( ), OR 11.

2 Make the announcement.

3 Hang up when you are finished making your

announcement to disconnect from the public

address system.

NOTE -- Vertical SIP phones can not receive a

page through the handset at this time. However,

this function will be available in a future release.

SAMPLE SIP PHONE MODELS ...

USING INTERCOM AND PAGE

5000i

480i

53i

9133i

Volume Adjustment

Use the and - keys in the dial pad to adjust the

volume of the handset, speaker, and ringer.

Setting Options

To make changes to settings such as the display contrast, ring

tone, headset volume, etc. follow the procedure below.

1Press Options

2 Follow the prompts that appear on the display (use

the navigation keys as described).

• Refer to the Wave Phone User’s Guide or contact

your system administrator for information.

• 01 - Language

• 02 - Time and Date

• 03 - Set Ring Tone

• 04 - Clear Message Waiting

• 05 - Contrast Level

• 06 - Live Dialpad

• 07 - Headset Settings

• 08 - Network Settings

• 09 - SIP Settings

• 10 - Phone Status

The Vertical Wave system supports the following features on

the Vertical Wave SIP phones. Contact your phone System

Administrator for details on which features are configured on

your phone.

Using authorization codes

You might be assigned an authorization code that gives you the

ability to make calls on restricted phone line keys.

Authorization codes are used to override access restrictions.

Contact your system administrator for specific information

regarding authorization codes for your phone system.

1 Dial a phone number, and listen for a long beep.

2 Enter your authorization code, and press .

Callers List (Models 9133i and 9112i and some

Aastra 5 Series

Models)

The Callers list is a stored log of your incoming calls. Your

phone logs the number and name (if available) of the caller,

when they last called, and the number of times they tried to

reach you. Refer to the Wave Phone User’s Guide for details.

Directory List (Models 9133i and 9112i and some

Aastra 5 Series

Models)

The Directory List is like a customized “phone book”. Refer to

the Wave Phone User’s Guide for details.

Do Not Disturb

Prevent your phone from ringing.

Press 41 to enable, then press 42 to disable

Do Not Disturb. Press

on 5000i models.)

Log Incident

When using a remote phone, pressing ** logs a time stamp in the

Wave system trace logs that may be useful when troubleshooting a

problem.

PHONE SETTINGS

ADDITIONAL FEATURES

IMPORTANT! Which Phone Are You Using?

This Quick Reference Guide includes general information for SIP

phones. Because SIP phone models vary as to which features

and buttons are available on a particular phone, please refer to the

Wave Phone User’s Guide to review specific details about the

buttons/keys and features that are available on your phone.

Using the Display Screen

When you are not on a call, the display screen provides

information about your phone and extension.

When you are on a call, the display screen provides information

about the call, including a call timer that displays the length of time

you have been connected. Additional information is displayed if

your calls are forwarded to another number, if you have a call on

hold, if you have missed calls, and so forth.

When you are on an inbound call, the display screen shows caller

ID information if it was provided by the other party and if your

phone service provider sends it. If caller ID is not available, the

display screen identifies the inbound trunk group handling the call.

Using the Navigation Keys

When you press certain keys, for example a feature key or soft

key, a list of options is sometimes displayed from which you must

select an item.

Use the display screen control keys to move up and down the list,

then use the appropriate soft key to select the desired item.

Display Icons

The following icons may appear on the display screen when you

are making or receiving calls, or while you are browsing the

Callers list.

ICON DESCRIPTION

You have received a new voice message.

You have a call on hold. While browsing the

Callers list, indicates an unanswered call.

You are on an outgoing call. While browsing the

Callers list, indicates an answered call.

You are on an incoming call. While browsing

the Callers list, indicates a Call Waiting call.

You have an incoming Call Waiting call.

You have a new incoming call.

You returned the call from the Callers list.

The caller has called twice. The display screen

shows the date and time of the last call from the

caller.

INTRODUCTION

Scroll

DOWN

SELECT

Scroll

This feature may be available on some Aastra 5 series models.

Release 2.0 Service Pack 1 - April 2011

Vertical Aastra 53i Quick Reference Manual

Bränd: Vertical

Mudel: Aastra 53i

Kategooria: IP-telefonid

Tüüp: Quick Reference Manual

See käsiraamat sobib ka

Laadige alla PDF

aruanne

teistes keeltes

English: Vertical Aastra 53i

Vertical Aastra 53i Quick Reference Manual

See käsiraamat sobib ka

Vertical Aastra 53i Quick Reference Manual

teistes keeltes

Muud dokumendid