LG TONE-FP6W Kasutusjuhend

TONE-FP6 / TONE-FP6W

OWNER’S MANUAL

Bluetooth® LG Stereo Headset

English

Français

Deutsch

EspañolItaliano

Nederlands

Polski

Google Play App Store

Rev 3.0 EUF

www.lg.com

LG Electronics Inc. Single point of contact (EU/UK) :

Krijgsman 1, 1186 DM Amstelveen, The Netherlands

Using LG TONE Free™

Utilisation du LG TONE Free™

LG TONE Free™ verwenden

Utilizzo di LG TONE Free™

LG TONE Free™ gebruiken

Używanie LG TONE Free™

Uso de LG TONE Free™

ENGLISH

Using LG TONE Free™

1

NOTE: For the best performance and to prevent any damage to, or

misuse of the headset, please read all of the information carefully prior

to using the headset.

Any modications or changes to this manual due to typographical errors

or inaccuracies of stated information shall only be made by

LG Electronics Inc.

The LG TONE Free (TONE-FP6) is a lightweight wireless headset that uses

Bluetooth technology.

This product can be used as an audio accessory for devices supporting

either the A2DP or Hands-Free Bluetooth Prole.

Safety Precautions

The following safety precautions are provided to prevent any unexpected

accident or damage. Please familiarise yourself with the safety precautions.

The safety precautions are classied into “WARNING” and “CAUTION”.

!

WARNING: Failing to comply with the instructions may result in

serious injury or death.

!

CAUTION: Failing to comply with the instructions may result in minor

injury or product damage.

2

!

WARNING

Do not drop the product from a high place.

Make sure there is no water, alcohol, or benzene in contact with the

product.

Do not store the product in a wet or dusty place.

Do not place heavy objects on the product.

This product is waterproof to the IPX4 level (daily life waterproof).

(The IPX4 waterproof rating applies to the earbud product only.)

Do not put the product under the water or use it in a humid location

such as a bathroom.

! CAUTION

Do not disassemble, adjust, or repair the product arbitrarily.

Do not place the product near excessive heat or ammable material.

The product may be damaged if an incompatible charger is used.

Make sure that an infant or child does not swallow a magnet or a small

component of the product.

Make sure that foreign objects do not enter the charger’s connectors

(charging port and power plug). Failure to do so may result in re or

electric shock.

If you have a medical device implanted, contact your doctor before

using this device.

This product has a built-in battery, and the battery cannot be removed

or replaced arbitrarily.

3

For your safety, do not remove the battery incorporated in the product.

If you arbitrarily replace the battery or don’t replace it correctly, it may

explode.

The lithium-ion battery is a hazardous component that can cause injury.

Battery replacement by an unqualied professional can cause damage

to your device.

Do not replace the battery by yourself. The battery can be damaged,

which can cause overheat and injury. The battery must be replaced by

authorised service provider. The battery should be recycled or disposed

separately from household wastes.

Do not discard the battery arbitrarily. Follow the local procedure for

discarding batteries.

In order to prevent unnecessary energy consumption, disconnect the

device when fully charged. Always use an easily accessible power outlet

for charging your device.

Risk of re or explosion if the battery is replaced by an incorrect type.

Do not store or transport at pressures lower than 11.6 kPa and at

above 15000 m altitude.

Replacement of a battery with an incorrect type that can defeat a

safeguard (for example, in the case of some lithium battery types).

Disposal of a battery into re or a hot oven, or mechanically crushing or

cutting of a battery, that can result in an explosion.

Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of ammable

liquid or gas.

4

A battery subjected to extremely low air pressure that may result in an

explosion or the leakage of ammable liquid or gas.

Do not carelessly throw away old batteries. It can cause an explosion or

re. The disposal method may vary by country and region. Dispose of it

in an appropriate manner.

NOTE

If the product is exposed to excessive sweat, clean the product.

Keep the earbuds clean.

Wearing earbuds for a long time may cause pain, and if humidity inside

ears continues for a long time, it may cause skin trouble.

HD Speaker

If the communication network of the device you are connecting to

supports HD Voice Calling, you can enjoy making voice calls and

listening to music in high denition.

5

Product Components

LG TONE Free™

Earbuds (medium eargels

installed)

UV Charging Case

Extra Ear Gels

(small & large) USB Type C™

Charging Cable

Reference guide Simple Owner's Manual WEEE Card

(Europe Only)

NOTE: Actual product design may differ from images shown in manual.

Make sure authentic LG Electronics components are used. Using a

non-authentic component may damage the product and thus void the

warranty.

Use the USB Type C™ cable provided with the product.

!

CAUTION

6

Overview

Charging Case

Earbuds

*Make sure that the charging terminal is not soiled with foreign substance.

Charging port

Charging terminals

UVnano LED

Battery Status Indicator (up)

UVnano Indicator (down)

Mood light

(When you open the

charging case, the mood

light turns on and off.)

Microphone

TouchpadTouchpad Charging terminalsCharging terminals

Speaker mesh

(Microphone)

Speaker mesh

(Microphone)

7

*The appearance and specications of the actual product may differ

depending on the model.

Pairing and Connecting

Fast Pair

-(

#MVFUPPUI 0/

~1m

1 Turn on the Bluetooth function on the mobile phone or the device to

be connected.

2 Open the cover of the charging case with the earbuds mounted on the

case. Press and hold the touchpad of the left or right earbud for 3 to 5

seconds until the battery status indicator blinks in blue.

-(

-(50/&'1

-(

-(50/&'1

#MVFUPPUI

8

3 When the Fast Pair connection pop-up appears on the top area of the

mobile phone screen, tap it to connect. (It only supports Android™ 6.0

or higher, and requires conguring Bluetooth and location information

settings of the mobile device.)

4 If the pop-up does not appear, select [LG-TONE-FP6] from the

Bluetooth menu on the mobile phone and connect it (for users of iOS

or Android 5.0 or lower versions).

!

CAUTION: In the list of Bluetooth connected devices,

LG-TONE-FP6_LE is not the correct model name for connection.

Check the model name in use and connect with the model name

without “LE”.

If the earbud model name is abnormally displayed on the Android

device, change the model name in the Bluetooth menu of

Connected Device Settings.

NOTE: To connect with another device, perform the above procedure

again.

Automatic Reconnection

The earbuds are connected automatically when you open the cover of

the charging case. If you close the cover of the charging case with both

earbuds mounted in the charging case, the earbuds are disconnected.

9

Wearing Earbuds

1 Separate the earbuds from the charging case and adjust them so that

they t comfortably in your ears.

NOTE: You can use ear gels that t your ears to improve

Active Noise Canceling (ANC) performance and enjoy

rich music sound.

2 When you wear the earbuds, you will hear a wearing detection alarm.

10

Playing Music

-(

Function Description

Play / Pause : Touch the left or right earbud once.

Adjusting

the Volume : Touch the left(Decrease volume) or

right(Increase volume) earbud twice.

Play Next : Touch the left or right earbud three times.

NOTE: You can change the operation method of the function in the

touchpad settings of the LG TONE Free app.

11

Mobile Calling Functions

Function Status Description

Answering

Calls Ringing Touch the left or right earbud once.

Ending Calls Talking Touch the left or right earbud twice.

Making Calls Idle If you make a call using a mobile phone,

the call is automatically connected to the

headset.

Receiving

Calls while

on the

Phone

Talking

If you touch the left or right earbud once,

the current call will go on hold, and you will

be able to answer an incoming call.

If the previous call is on hold, you can nish

the current call on the mobile phone.

(It works differently depending on the

mobile phone settings.)

Rejecting

Calls Ringing Touch and hold the left or right earbud.

12

Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)

Listen to the Ambient Sound (LAS)

Touch and hold the left or

right earbud to switch between

the ANC mode and the LAS

mode.

You can set the LAS and ANC

functions in the LG TONE

Free app.

You can congure the Listen to

the Ambient Sound mode and

Conversation mode using the

LG TONE Free app.

If you use the LAS or ANC

function, the battery consumes

faster, reducing the time you

can use the product.

You can use the LAS and ANC

functions while being idle,

listening to music, or being on

the phone.

*ANC is an acronym for Active

Noise Cancellation.

The Listen to the Ambient Sound

(LAS) function allows you to listen to

the ambient sound so that you can

recognize the surrounding situation

and any potential risks.

Active Noise Cancellation (ANC)

The Active Noise Cancellation (ANC)

function blocks any ambient sound.

So, you can use the function to

listen to the music or watch a video

without interference.

13

!

CAUTION: When the LAS mode is enabled, you may hear the ambient

sound become loud suddenly.

When using the ANC function outdoors, pay attention to the

surrounding environment for safety.

UVnano

The charging case has a built-in

UVnano LED, which allows you to

use your earbuds cleanly.

If you charge the earbuds wired after

mounting them on the charging case

and closing the cover, the UVnano

LED operates for 5 minutes.

*UVnano is a compound word

derived from the words UV and its

unit, nanometer.

NOTE: The UVnano indicator turns on blue while the UVnano LED is on.

The UVnano charging case eliminates up to 99.9% of harmful

bacteria inside the earbud hole.

In the case of a white product, discolouring may occur in the

contact area of the UVnano LED, but it does not affect the product

function.

!

CAUTION: Be aware that the temperature of the earbuds may rise

while the UVnano LED is on.

14

Charging

Wired Charging

When the charging cable is connected, the charging status is displayed in

the charging case.

NOTE: The earbuds and the charging case are charged at the same time.

The charging port on the charging case cannot be used to supply

power to mobile phones, etc.

15

Wireless Charging

Align the bottom center of the charging case with the center of the

wireless charger.

NOTE: The wireless charger is not provided. The wireless charging

function may not work in some wireless chargers. Wireless charging

feature charges at a slower rate due to less power being transmitted

to the charging case.

If you do wireless charging, the UVnano LED sterilizes the earbuds for

5 minutes before charging.

16

Checking the Battery Status

If earbuds are mounted in the charging case, the earbuds’ battery status is

displayed. Otherwise, the charging case’s battery status is displayed.

If the earbuds are mounted in the charging case while plugged in, the

UVnano process will commence for 5 minutes.

Once this process is complete, the charging case's battery status will be

displayed.

Battery

Status

Indicator

Remaining

Battery (charger

not connected)

Charging

State (charger

connected)

Red 20% or lower Charging

Yellow 20% - 80% -

Green 80% or higher Fully charged

NOTE: When the charging case lid is closed,

charging case battery status is displayed. If

the charging case has no remaining charge,

there will be no display and it cannot function.

We recommend you keep the charging

case charged at all times as the earbuds

are not able to be turned on and turned off

independently.

17

Battery Status Indicator

Status Description

Bluetooth Search

Mode The battery status indicator ashes in blue.

Battery below 20% The battery status indicator turns on and

off in red.

Battery 20% - 80% The battery status indicator turns on and off

in yellow.

Battery 80% or

more The battery status indicator turns on and off

in green.

When there is

a problem while

charging The battery status indicator ashes in red.

Charging

(charger connected) The battery status indicator turns on in red.

Charging complete

(charger connected) The battery status indicator turns on in green.

18

Out of Range

If the device connected to the product is out of effective communication

range, the communication signal becomes weak and the communication is

lost. The effective communication range may vary depending on surrounding

and other conditions.

If the device comes back within effective communication range, the product

automatically reconnects to the device. If the device is not automatically

reconnected, touch the left or right earbud once to connect them.

LG TONE Free App

If you install the “LG TONE Free” app, you can use Check Earbud Battery,

Voice Alert, Change Equalizer Mode, Check Last Connected Location

Information, and Find My Earbuds functions. Check out the app for more

details.

To install the “LG TONE Free” app, search LG TONE Free in the Google Play

Store or App Store or scan the QR code below.

It supports Android 7.0 or higher and iOS 11 or higher.

Google Play App Store

Leht laadib ...

LG TONE-FP6W Kasutusjuhend

See käsiraamat sobib ka

LG TONE-FP6W Kasutusjuhend

teistes keeltes