HPM REMOTEBTDL Kasutusjuhend

INSTRUCTIONS ON USING THE HPM CONNECT APP

Contents

SECTION A: GENERIC INSTRUCTIONS ON USING THE HPM CONNECT APP

SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART DOWNLIGHT

PAIRING THE DOWNLIGHT 6

AUTO SCAN 6

ADD MANUALLY 7

PAIRING MULTIPLE SMART DOWNLIGHTS 8

SET TIMER 8

RESET THE DOWNLIGHT 9

WALL SWITCH FOR DOWNLIGHT 9

PAIRING THE REMOTE CONTROL 10

PAIRING WITHOUT APP 11

UNPAIRING WITHOUT APP 11

UNPAIRING THROUGH APP 11

APP DOWNLOAD 1

REGISTRATION 1

SHARING SMART DEVICE 2

CREATE GROUP 4

ADD SMART DEVICES TO GROUP 5

PAIRING THE SMART FAN 12

AUTO SCAN 12

ADD MANUALLY 13

PAIRING MULTIPLE SMART FANS 14

SET TIMER 15

RESET THE SMART FAN 15

SECTION D: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART FAN

SECTION C: INSTRUCTIONS ON PAIRING/UNPAIRING THE REMOTE CONTROL FOR DOWNLIGHT

SECTION A: GENERIC INSTRUCTIONS ON USING THE HPM

CONNECT APP

SECTION A: GENERIC NSTRUCTIONS ON USING THE HPM CONNECT APP

1

1. HPM Connect App Download

Download the HPM Connect App on your smart device. You can go to the store (App Store or Google Play) directly

or scan the QR code given below, which will automatically take you to the download page.

2. Registration

Open the HPM Connect App on your smart device. For new users, sign up for a new account and for an existing user,

log-in with your username and password.

a) Sign up using email.

b) Verification code will be sent through via email.

c) Set password, then proceed to open App.

Log In

Sign Up

Click on Agree

Ensure your smart device is connected to the internet to follow all the steps.

Get Verification code

Click on Edit for downlight Click on Edit for fan

Click on Share Device Add Log-in details (Only registered

account can share the device)

3. Sharing Smart Device

INDIVIDUAL SHARING

Click on Add Home member

SECTION A: GENERIC NSTRUCTIONS ON USING THE HPM CONNECT APP

2

John

[email protected]

Select the downlight/fan for sharing

Downlight

SECTION A: GENERIC NSTRUCTIONS ON USING THE HPM CONNECT APP

SHARE FROM HOME MANAGEMENT

Click on Me icon Select Home Management Select Create a home Scroll down and Select

Add Member

■ Once the member is selected, the new member receives a notification from the HPM Connect App.

■ After accepting the invitation, the new member can now access all devices paired with HPM Connect App.

Note: 1. If only one smart product is installed, it can only be operated by one paired smart device at a time. The other

smart device which is not controlling should close the Hpm Connect App.

2. To operate using multiple smart devices you must have multiple smart products.

3

John

[email protected]

Create a home

Tom

Joe

Pop

Ralf

Add Member

John

Tom

Joe

Pop

Click on Accept

SECTION A: GENERIC NSTRUCTIONS ON USING THE HPM CONNECT APP

4. Create Group

4

Type the name and Press Save

Add Room

Save

Click on Room Management Click on Add Room

Select the group where you want to

add the downlight and click Save.

Click on Edit Click on Location

Save

5

5. Add Smart Devices to Group

Select the downlight/fan for adding

SECTION A: GENERIC NSTRUCTIONS ON USING THE HPM CONNECT APP

Click on Edit for downlight Click on Edit for fan

Downlight

SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP

FOR SMART DOWNLIGHT

SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART DOWNLIGHT

6

AUTO SCAN

i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON.

ii) Reset the device, first power ON the Downlight then switch OFF/ON 5 times (OFF period should be1-2 seconds).

Then the downlight should start blinking (slowly like breathing 3 times). If the light does not blink and stays ON,

repeat the process.

iii) Click on Add Device or “ ”

iv) Select Lighting and select Auto Scan.

v) Select Next.

+

1. Pairing the Downlight

You may pair up to a max. number of 128 downlights on a single mesh.

Click Done

vi) Press Done once detected.

Add Device

Done

SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART DOWNLIGHT

7

vii) Congratulations!! Your HPM Smart Downlight is now paired with your smart device. You can now control your

downlight from your App.

ADD MANUALLY

i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON.

ii) Click on Add Device or “ ”

iii) Select Lighting

iv) Select Add Manually

+

Click confirmation button and

Next once reset is done.

Click Go to add Click Done

Click Next

Add Device

Done

SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART DOWNLIGHT

8

v) Congratulations!! Your HPM Smart Downlight is now paired

with your smart device. You can now control your downlight

from your App.

Click on Timer Set the Timer and press Confirm

2. Set Timer

PAIRING MULTIPLE SMART DOWNLIGHTS

Click Done Click Done

■ To pair another downlight repeat the steps for pairing.Once added, paired downlights can be controlled individually by

clicking power button. You can click on “ “ to add more downlights to this list.

By clicking each power button

downlights can be controlled individually

Select the downlight to set timer

Done +

+

Downlight

Timer

Click on Resetting Device. Click on Resetting Devices

Follow the steps for resetting

device. Click confirmation button and

Next once reset is done.

3. Reset the Downlight

4. Wall Switch for Downlight

SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART DOWNLIGHT

9

Add Device

Lighting

Switch light OFF and back ON

(OFF periods 1- 2 seconds)

Step 1

Power ON the device and confirm the light is O

Step 3

Confirm the light has started blinking. If the light

does not blink and stays ON, repeat the process.

How to reset downlight

N

■ If the downlight is removed from a smart device - it becomes available for pairing with another smart device.

If you are using wall switch for downlight,

1. First power ON the downlight then switch OFF/ON 5 times (OFF period should be1-2 seconds).Then the downlight

should start blinking (slowly like breathing 3 times).

2. You can now pair the downlight following the instructions on pairing section. Adjust the settings as required.

3. After pairing, once downlight is switched OFF and turned ON the previous settings will prevail.

SECTION C: INSTRUCTIONS ON PAIRING/ UNPAIRING THE

REMOTE CONTROL FOR DOWNLIGHT

i) Make sure that you have a working Remote Control. Ensure 2x AAA batteries are inserted.

ii) Enable networking mode on Remote Control by pressing both ON & OFF buttons simultaneously for 5 seconds until

the indicator on remote starts to flash.

iii) Go to HPM Connect App and click on Add Device or “ ”

iv) Select Lighting and select Auto Scan.

v) Select Go to Add.

vi) Click on Done once paired.

+

SECTION C: INSTRUCTIONS ON PAIRING/UNPAIRING THE REMOTE CONTROL FOR DOWNLIGHT 10

1. Pairing the Remote Control

Click Next

Add Device

ON OFF

Indicator

Lighting

vii) Select the Remote control and add all downlights you want to control with Remote control.

viii) Congratulations!! You can now control your HPM Smart Downlight with Remote control. Follow the same

process if you want to add more devices for pairing.

Click on Remote control Select Configure group A Select the downlights to add and

click Save

PAIRING WITHOUT APP (IF THE DOWNLIGHT & REMOTE CONTROL HAVE BEEN PAIRED BEFORE)

1. When the downlight is powered ON, it automatically enters the pairing mode. This mode is maintained for 10s, during

this time, long-press the ON button of the Remote Control until the indicator light flashes.

2. Remote control now enters the pairing mode. The downlight flashes 3 times to indicate successful pairing otherwise,

the pairing fails.

3. After the pairing is complete, you can adjust the brightness and turn ON/OFF the downlight through Remote Control.

PLEASE NOTE “TO CONTROL THE DOWNLIGHTS WITH REMOTE , ENSURE THAT DOWNLIGHTS AND REMOTE ARE

PAIRED WITH APP FIRST”

UNPAIRING WITHOUT APP

1. When the downlight is powered ON, it automatically enters the unpairing mode. This mode is maintained for 10s. during

this time, long-press the OFF button of the Remote control until the indicator flashes.

2. The Remote Control now enters the unpairing mode.

3. The downlight flashes 3 times to indicate successful unpairing. The Remote Control is unpaired and cannot control the

downlight.

UNPAIRING THROUGH APP

1. From the App “Click on Remote Control” to enter the Remote Control panel page.

2. Select “Configure the Remote Control”, go to the configuration page, which takes you to a list of paired downlights.

Choose the downlight to be unpaired and hit Save.

3. Downlights that are successfully unpaired will flash 3 times and unpaired downlights are now displayed in the addable

Group.

11

SECTION C: INSTRUCTIONS ON PAIRING/UNPAIRING THE REMOTE CONTROL FOR DOWNLIGHT

Save

SECTION D: INSTRUCTIONS ON USING THE HPM CONNECT APP

FOR SMART FAN

1. Pairing the Smart Fan

■ Turn ON the wall switch for the fan. The light on the fan will be ON.

■ Have paired and working Remote control. If the remote is not paired with the fan, press and hold OFF button

until the light on the fan blinks once within 10 seconds.

■ To pair the fan with your HPM Connect App, press and hold ‘BT’ button on the remote (up to 20 seconds) until

the light on the fan blinks 3 times.

AUTO SCAN

i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON.

ii) Reset the device, hold the “BT” button on the remote control until the light blinks. If the light does not blink

repeat the process.

iii) Select Add Device or “ ”

iv) Select Ventilation and select Auto Scan.

v) Select Done once added.

+

SECTION D: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART FAN

12

Click Next

Add Device

Ventilation

Done

Click on” “ to add the device.

Click on” “

Click confirmation button and

Next once reset is done.

+

i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON.

ii) Reset the device, hold the BT button on the remote control until the light blinks. If the light does not blink repeat the process.

iii) Select Add Device or “ ”

iv) Select Ventilation and select Add Manually.

+

ADD MANUALLY

vi) Congratulations!! Your HPM Smart fan is now paired with your

smart device. You can now control your fan from your App.

SECTION D: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART FAN

13

Add Device

Ventilation

PAIRING MULTIPLE SMART FANS

■ To pair another fan repeat the steps for pairing. Once added, paired fans can be controlled individually by cliking the

power button. You can click on “ “ to add more fans to this list.

Click Add All By clicking each power button

fans can be controlled individually

vi) Congratulations!! Your HPM Smart fan is now paired with your smart device. You can now control your fan from your App.

SECTION D: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART FAN

14

v) Select Next once added and press Done.

Done

+

Leht laadib ...

HPM REMOTEBTDL Kasutusjuhend

See käsiraamat sobib ka

HPM REMOTEBTDL Kasutusjuhend

teistes keeltes

Muud dokumendid