vii) Select the Remote control and add all downlights you want to control with Remote control.
viii) Congratulations!! You can now control your HPM Smart Downlight with Remote control. Follow the same
process if you want to add more devices for pairing.
Click on Remote control Select Configure group A Select the downlights to add and
click Save
PAIRING WITHOUT APP (IF THE DOWNLIGHT & REMOTE CONTROL HAVE BEEN PAIRED BEFORE)
1. When the downlight is powered ON, it automatically enters the pairing mode. This mode is maintained for 10s, during
this time, long-press the ON button of the Remote Control until the indicator light flashes.
2. Remote control now enters the pairing mode. The downlight flashes 3 times to indicate successful pairing otherwise,
the pairing fails.
3. After the pairing is complete, you can adjust the brightness and turn ON/OFF the downlight through Remote Control.
PLEASE NOTE “TO CONTROL THE DOWNLIGHTS WITH REMOTE , ENSURE THAT DOWNLIGHTS AND REMOTE ARE
PAIRED WITH APP FIRST”
UNPAIRING WITHOUT APP
1. When the downlight is powered ON, it automatically enters the unpairing mode. This mode is maintained for 10s. during
this time, long-press the OFF button of the Remote control until the indicator flashes.
2. The Remote Control now enters the unpairing mode.
3. The downlight flashes 3 times to indicate successful unpairing. The Remote Control is unpaired and cannot control the
downlight.
UNPAIRING THROUGH APP
1. From the App “Click on Remote Control” to enter the Remote Control panel page.
2. Select “Configure the Remote Control”, go to the configuration page, which takes you to a list of paired downlights.
Choose the downlight to be unpaired and hit Save.
3. Downlights that are successfully unpaired will flash 3 times and unpaired downlights are now displayed in the addable
Group.
11
SECTION C: INSTRUCTIONS ON PAIRING/UNPAIRING THE REMOTE CONTROL FOR DOWNLIGHT
Save