Beko DH 7411 PA Kasutusjuhend

Bränd: Beko

Mudel: DH 7411 PA

Kategooria: Trummelkuivatid

Tüüp: Kasutusjuhend

DH 7411 PA

Dryer

User Manual

2960312250_EN/010619.1510

Pesukuivati

Kasutusjuhend

Please read this user manual first!

Dear Customer,

Thank you for prefering a Beko product.

We hope that your product which has been

manufactured with high quality and technology

will give you the best results. We advise you

to read through this manual and the other

accompanying documentation carefully

before using your product and keep it for

future reference. If you transfer the product

to someone else, give its manual as well. Pay

attention to all details and warnings specified

in the user manual and follow the instructions

given therein.

Use this user manual for the model indicated on

the cover page.

• Read the instructions.

Explanation of symbols

Throughout this user manual the following

symbols are used:

DANGER!

• Warning against electric shock.

DANGER!

• Warning against fire hazard.

WARNING!

• Warning for hazardous situations with regard

to life and property.

This product was manufactured using the latest technology in environmentally friendly conditions.

WARNING!

• Warning against hot surfaces.

WARNING!

• Warning against scalding hazard.

NOTE

• Important information or useful hints about

usage.

Packaging materials of the product

are manufactured from recyclable

materials in accordance with our

National Environment Regulations.

Do not dispose of the packaging wastes with

the domestic waste or other wastes, discard

them to the dedicated collection points

designated by the local authorities.

Dryer / User Manual

1 Important instructions for safety and environment

NOTE

• This section contains safety

instructions that will help protect

from risk of personal injury or

property damage. Failure to follow

these instructions shall void any

warranty.

1.1 General safety

WARNING!

This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand the

hazards involved. Children shall not

play with the appliance. Cleaning

and user maintenance shall not

be made by children without

supervision.

Children of less than 3 years should

be kept away unless continously

supervised.

• Adjustable feet should not be

removed. The gap between the

dryer and the floor should not be

reduced with materials such as

carpet, wood and tape. This will

cause problems with the dryer.

WARNING!

Always have the installation and

repairing procedures carried

out by the Authorized Service.

Manufacturer shall not be held

liable for damages that may arise

from procedures carried out by

unauthorized persons.

• Never wash the dryer by spraying

or pouring water onto it! There is

the risk of electric shock!

For the products with a steam

function:

WARNING!

• Use only distilled water or water

condensed in the water tank of the

machine in steam programs. Do

not use mains water or additives.

When using condensed water in the

water tank, it should be filtered and

cleared of fibres.

• Do not open the door when steam

programs are running. Hot water

may be expelled.

• Before putting laundry in a steam

program, stains on it should be

removed.

• You may only put laundry that is not

dirty or stained but permeated with

unpleasant odour in steam (odour

removal) program.

• Do not use any dry cleaning sets

or additional materials in a steam

program or in any program.

Dryer / User Manual

1.1.1 Electrical safety

DANGER!

• Electrical safety instructions

should be followed while electrical

connection is made during the

installation.

• Connect the dryer to a grounded

outlet protected by a fuse at the

value specified on the type label.

Have the grounding installation

performed by a qualified electrician.

Our company shall not be liable for

any damages that will arise when

the dryer is used without grounding

in accordance with the local

regulations.

• The voltage and allowed fuse

protection is stated on the type label

plate.

• The voltage specified on the type

label must be equal to your mains

voltage.

• Unplug the dryer when it is not in

use.

• Unplug the dryer from the mains

during installation, maintenance,

cleaning and repair works.

• Do not touch the plug with wet

hands! Never unplug by pulling

on the cable, always pull out by

grabbing the plug.

WARNING!

• The appliance must not be

supplied through an external

switching device, such as a timer,or

connected to a circuit that is

regularly switched on and off by

utility.

DANGER!

• Do not use extension cords, multi-

plugs or adaptors to connect the

dryer to power supply in order to

decrease the risk of fire and electric

shock.

• Power cable plug must be easily

accessible after installation.

• Damaged mains cable should be

changed notifying the Authorized

Service.

• If the dryer is faulty, it must not be

operated unless it is repaired by an

authorized service agent! There is

the risk of electric shock!

1.1.2 Product safety

DANGER!

• Superheating of the clothes inside

of the dryer can occur if you cancel

the programme or in the event of

a power failure whilst the dryer is

running, this concentration of heat

can cause self-combustion and fire

so always activate the ventilation

programme to cool down or quickly

remove all laundry from the dryer in

order to hang them up and dissipate

the heat.

WARNING!

• Ensure that the air inlet of the dryer

is open and it is well-ventilated.

• Product contains R290 refrigerant.

• R290 is an environment-friendly, but

flammable refrigerant.

• Keep the product away from

potential heat sources that may

cause it to ignite.

Dryer / User Manual

DANGER!

Points to be taken into

consideration for fire hazard:

Below specified laundry or items

must not be dried in the dryer

considering fire hazard.

• Unwashed laundry items

• Items soiled with oil, acetone,

alcohol, fuel oil, kerosene, stain

removers, turpentine, paraffin,

paraffin removers, petrol, wax or

wax removers must be washed in

hot water with plenty of detergent

before being dried in the dryer.

For this reason especially the items

containing the above specified

stains must be washed very well,

to do this use adequate detergent

and choose a high washing

temperature.

Below specified laundry or

items must not be dried in the

dryer due to the fire hazard:

• Garments or pillows bolstered with

rubber foam (latex foam), shower

bonnets, water resistant textiles,

materials with rubber reinforcement

and rubber foam pads.

Clothing cleaned with industrial

chemicals.

Items such as lighter, match,

coins, metal parts, needle etc. may

damage the drum set or may lead

to functional problems. Therefore

check all the laundry that you will

load into your dryer.

WARNING!

Never stop your dryer before the

programme completes. If you must

do this, remove all laundry quickly

and lay them out to dissipate the

heat.

DANGER!

• Clothes that are washed

inadequately may ignite on their

own and even may ignite after

drying ends.

• You must provide enough ventilation

in order to prevent gases exiting

from devices operating with other

types of fuels including the naked

flame from accumulating in the

room due to the back fire effect.

WARNING!

• Underwear that contains metal

reinforcements should not be dried

in the dryer. Dryer may be damaged

if metal reinforcements come loose

and break off during drying.

NOTE

• Use softeners and similar products

in accordance with the instructions

of their manufacturers.

Always clean the lint filter before or

after each loading. Never operate

the dryer without the lint filter

installed.

Dryer / User Manual

WARNING!

• Never attempt to repair the dryer

by yourself. Do not perform any

repair or replacement procedures

on the product even if you know

or have the ability to perform the

required procedure unless it is

clearly suggested in the operating

instructions or the published service

manual. Otherwise, you will be

putting your life and others’ lives in

danger.

• There must not be a lockable, sliding

or hinged door that may block the

opening of the loading door in the

place where your dryer is to be

installed.

• Install your dryer at places suitable

for home use. (Bathroom, closed

balcony, garage etc.)

• Make sure that pets do not enter the

dryer. Check the inside of the dryer

before operating it.

• Do not lean on the loading door of

your dryer when it is open, otherwise

it may fall over.

• The lint must not be allowed to

accumulate around the tumble dryer

• The tumble dryer is not to be used if

industrial chemicals have been used

for cleaning.

• Fabric softeners, or similar products.

should be used as specified by the

fabric softener instructions.

• Exhaust air must not be discharged

into a flue which is used for

exhausting fumes from appliances

burning gas or other fuels.

1.2 Mounting over a washing machine

• A fixing device should be used between

the two machines when installing the

dryer above a washing machine. The

fitting device must be installed by the

authorized service agent.

• Total weight of the washing machine

and the dryer -with full load- when

they are placed on top of each other

reaches to approx. 180 kilograms. Place

the products on a solid floor that has

sufficient load carrying capacity!

WARNING!

• Washing machine cannot be placed on

the dryer. Pay attention to the above

warnings during the installation on your

washing machine.

Installation Table for Washing Machine and Dryer

Dryer

Depth

Washing Machine Depth

62 cm

60 cm

54 cm

< 50 cm

54 cm

Can be installed Cannot be

installed

60 cm

Can be

installed Cannot be installed

1.3 Intended use

• Dryer has been designed for domestic

use. It is not suitable for commercial

use and it must not be used out of its

intended use.

• Use the dryer only for drying laundry that

are marked accordingly.

• The manufacturer waives any

responsibility arisen from incorrect usage

or transportation.

• The service life of the dryer that you

purchased is 10 years. During this period,

original spare parts will be available to

operate the dryer properly.

Dryer / User Manual

1.4 Child safety

• Packaging materials are dangerous for

the children. Keep packaging materials

away from children.

• Electrical products are dangerous for the

children. Keep children away from the

product when it is operating. Do not let

them tamper with the dryer. Use the child-

proof lock in order to prevent the children

to tamper with the dryer.

NOTE

Child-proof lock is on the control panel.

(See Child lock)

• Keep loading door closed even when the

dryer is not in use.

1.5 Compliance with the WEEE

regulation and disposing of the waste

product

This product complies with EU

WEEE Directive (2012/19/EU). This

product bears a classification

symbol for waste electrical and

electronic equipment (WEEE).

This product has been

manufactured with high quality

parts and materials which can be reused and

are suitable for recycling. Do not dispose of

the waste product with normal domestic and

other wastes at the end of its service life. Take

it to the collection center for the recycling of

electrical and electronic equipment. Please

consult your local authorities to learn about

these collection centers.

DANGER!

• R290 is an flammable refrigerant. Thus,

ensure that the system and the pipes

are not harmed during operation and

handling.

• Keep the product away from potential

heat sources that may cause it to ignite in

case of damage.

• Do not dispose of the product by putting

it in fire.

1.6 Compliance with RoHS Directive:

The product you have purchased complies

with EU RoHS Directive (2011/65/EU). It does

not contain harmful and prohibited materials

specified in the Directive.

1.7 Package information

Packaging materials of the product are

manufactured from recyclable materials in

accordance with our National Environment

Regulations. Do not dispose of the packaging

materials together with the domestic or other

wastes. Take them to the packaging material

collection points designated by the local

authorities.

1.8 Technical Specifications

Height (Min. / Max.) 84,6 cm / 86,6 cm*

Width 59,7 cm

Depth 56,8 cm

Capacity (max.) 7 kg**

Net weight (± 4 kg) 44 kg

Voltage

See type label***Rated power input

Model code

* Min. height: Height with adjustable feet are

closed.

Max. height: Height with adjustable feet are

opened maximum.

** Dry laundry weight before washing.

*** Type label is located behind the loading

door.

NOTE

• Technical specifications of the dryer are

subject to specification without notice to

improve the quality of the product.

• Figures in this manual are schematic and

may not match the product exactly.

• Values stated on markers on the dryer

or in the other published documentation

accompanying with the dryer are

obtained in laboratory in accordance with

the relevant standards. Depending on

operational and environmental conditions

of the dryer, these values may vary.

Dryer / User Manual

2 Your Dryer

2.1 Overview

1. Top panel

2. Control panel

3. Loading door

4. Kick plate opening button

5. Ventilation grids

6. Adjustable legs

7. In models where the tank is placed below,

the water tank is inside the toe board

8. Type label

9. Lint filter

10. Water tank drawer (in models where the

tank is placed above)

11. Power cord

2.2 Package Contents

1. Water

drain

hose *

5. Drying

basket

user

manual*

2. Filter

drawer

spare

sponge*

6. Water

Filling

Container*

3. User

Manual

7. Pure

Water*

4. Drying

basket*

Fragrance

Capsules

Group*

*It can be supplied with your machine

depending on its model.

3 Installation

Before the calling the nearest Authorized

Service for the installation of the dryer, ensure

that electrical installation and water drain is

appropriate referring to the user’s manual.

If they are not suitable, contact a qualified

electrician and technician to make necessary

arrangements.

NOTE

• Preparation of the dryer’s location

as well as the electrical and waste

water installations is under customer’s

responsibility.

WARNING!

• Prior to installation, visually check if the

dryer has any defects on it. If the drier

is damaged, do not have it installed.

Damaged products cause risks for your

safety.

• Let your dryer wait for 12 hours before

starting to use it.

3.1 Appropriate installation location

Install the dryer on a stable and level surface.

Dryer is heavy. Do not move it by yourself.

• Operate your dryer in a well ventilated,

dust-free environment.

• The gap between the dryer and the

surface should not be reduced by the

materials such as carpet, wood and tape.

• Do not cover the ventilation grills of the

dryer.

• There must not be a lockable, sliding or

hinged door that may block the opening

of the loading door in the place where

your dryer is to be installed.

• Once the dryer is installed, it should stay

at the same place where its connections

have been made. When installing the

dryer, make sure that its rear wall does

not touch anywhere (tap, socket, etc.).

• Place the dryer at least 1 cm away from

the edges of other furniture.

• Your dryer can be operated at

temperatures between +5°C and +35°C.

If the operating conditions fall outside

of this range, operation of the dryer will

be adversely affected and it can get

damaged.

Dryer / User Manual

• The rear surface of the tumble dryer shall

be placed against a wall.

DANGER!

Do not place the dryer on the power cable.

* Ignore following warning if your

product’s system does not contains

R290.

DANGER!

• Dryer contains R290 refrigerant.*

• R290 is an environment-friendly, but

flammable refrigerant.*

• Ensure that the air inlet of the dryer is

open and it is well-ventilated.*

• Keep potential flame sources away from

the dryer.*

3.2 Removing the transportation

safety assembly

WARNING!

• Remove the

transportation

safety assembly

before using the

dryer for the first

time.

• If the door swing

side of your

appliance can

be modified, see

the reversible

door mounting

instructions.

3.3 Connecting to the drain

You can directly drain accumulated water

through the water drain hose supplied with

the product instead of periodically draining the

water collected in the water tank.

Connecting the water drain hose

3 4

1-2 Pull hose at

the behind of

the dryer by

hand in order

to disconnect

it from where it

is connected.

Do not use

any tools to

remove the

hose.

3 Connect one end of the drain hose

supplied with the dryer to the connection

point from where you removed the hose of

the product in previous step.

4 Connect the other end of the drain hose

directly to the wastewater drain or to the

washbasin.

NOTE

• Water drain hose should be attached to a

height of maximum 80 cm.

• Make sure that the water drain hose is not

stepped on and it is not folded between

the drain and the machine.

• If there is an accessories pack supplied

with your product, please see the detailed

description.

3.4 Adjusting the feet

• Turn the feet to

left or right until

the dryer stands

level and firmly.

Dryer / User Manual

3.5 Transportation of the dryer

Drain all water that has remained in the dryer.

If direct water drain connection is made, then

remove the hose connections.

WARNING!

• We recommend carrying the dryer in

upright position. If it is not possible to

carry the machine in the upright position,

we recommend carrying it by tilting

towards the right side when looked from

the front.

3.6 Warnings about sounds

NOTE

• It is normal to

hear a metallic

noise from the

compressor

sometimes during

operation.

• Water collected during operation is

pumped to water tank. It is normal to

hear pumping noise during this process.

3.7 Changing the illumination lamp

In case an illumination lamp is used in your

laundry dryer.To change the Bulb/LED used

for illumination of your tumble dryer, call your

Authorized Service.The lamp(s) used in this

appliance is not suitable for household room

illumination. The intended purpose of this

lamp is to assist the user to place laundry in

the tumble dryer in a comfortable way. The

lamps used in this appliance have to withstand

extreme physical conditions such as vibrations

and temperatures above 50 °C

Dryer / User Manual

4 Preparation

4.1 Laundry suitable for drying in the

dryer

Always obey the instructions given on the

garment tags. Dry only the laundry having a

label stating that they are suitable for drying in

a dryer.

4.2 Laundry not suitable for drying in

the dryer

Items with this symbol

Do not dry

with dryer

should not be

dried in the dryer.

NOTE

• Delicate embroidered fabrics, woollen,

silk garments, delicate and valuable

fabrics, airtight items and tulle curtains

are not suitable for machine drying.

4.3 Preparing laundry for drying

• Laundry may be tangled with each other

after washing. Separate the laundry items

before placing them into the dryer.

• Dry garments having metal accessories

such as zippers, inside out.

• Fasten the zippers, hooks and buckles

and button sheets.

4.4 Things to be done for energy

saving

• Spin your laundry at the highest speed

possible when washing them. Thus,

the drying time is shortened and energy

consumption is reduced.

• Sort out the laundry depending on their

type and thickness. Dry the same type of

laundry together. For example thin kitchen

towels and tableclothes dries earlier than

thick bathroom towels.

• Follow the instructions in the user manual

for programme selection.

• Do not open the loading door of the

machine during drying unless necessary.

If you must open the loading door, do not

keep it open for a long time.

• Do not add wet laundry while the dryer is

in operation

• For models with a condenser unit: clean

the condenser once in a month or after

every 30 operations regularly. .

• Clean the filter periodically.Read the

Maintenance and cleaning of filters for

detalied information.

• For models with flue unit: comply with the

flue connection instructions and clean the

flue.

• During the drying process, air the room

well where your tumble dryer is operating.

4.5 Correct load capacity

Follow the instructions

in the “Programme

selection and

consumption table”.

Do not load more than

the capacity values

stated in the table.

Following weights are given as examples.

Laundry

Approximate

weights (g)*

Laundry

Approximate

weights (g)*

Cotton

quilt covers

(double)

1500 Blouses 150

Cotton quilt

covers (single)

1000 Cotton shirts 300

Bed sheets

(double)

500 Shirts 250

Bed sheets

(single)

350

Cotton

dresses

500

Large

tablecloths

700 Dresses 350

Small

tablecloths

250 Jeans 700

Tea napkins 100

Handkerchiefs

(10 pieces)

100

Bath towels 700 T-Shirts 125

Hand towels 350

*Dry laundry weight before washing.

Dryer / User Manual

5 Operating the product

5.1 Control Panel

1. On/Off/Programme selection button

2. Start/Pause button

3. End Time button

4. Audio warning level button

Volume up

Filter

cleaning

Tank

full

Child-proof

lock

Mute

Filter drawer /

Heat exchanger

cleaning

End/anti-

creasing

On/O

Timer

Delay

Drying

Cupboard

Dry

Iron Dry

Express

14’

Delicates

Jeans

BabyProtect

Extra dry

Cupboard

dry plus

Sport

Freshen Up

Start

pause

cancel

Cottons

Synthetics

Mix

Express

30’

Drying Rack/

TimeDry

Daily

Bedding

Duvet/

DownWear

Express

Shirt 30'

Wool Refresh

Hygiene

(BabyProtect+)

Shirts

Cottons Eco

Refreshment

Low

temparature

select

Dryness

Level+

Dryness

Level++

5.3 Preparation of drying machine

• Plug the drying machine.

• Open the loading door.

• Place the laundry to the drying machine

without jamming them.

• Push and close the loading door.

WARNING!

Ensure that no laundry

is jammed to the

loading door.

Select the desired programme using the On/

Off/Programme selection knob, the machine

will turn on.

NOTE

• Selecting a programme using the On/Off/

Programme selection button does not

mean that the programme started. Press

the Start / Stand-by button to start the

programme.

5.2 Symbols

Dryer / User Manual

Programmes Programme Description Capacity (kg)

Spin speed in

washing machine

(rpm)

Drying Time

(minutes)

Cotton Iron Dry

You may dry your cotton laundry to be ironed in this

programme to have them slightly damp for ease

ofironing. (Shirt, T-shirt, tablecloth, etc.)

7 1000 139

Cotton Cupboard Dry

You may dry all your cotton laundry in this

programme. (T-shirt, pants, pyjamas, baby clothes,

underwear, linen, etc.) You can put your laundry in

the wardrobe without ironing.

7 1000 174

Cotton Cupboard Dry

Plus

You may use this programme for extra dryness in

thick laundry such as pants, tracksuit. You can put

your laundry in the wardrobe without ironing.

7 1000 179

Cotton Extra Dry

You may dry your thick cotton laundry in this

programme such as towels, bathrobe, etc. You can

put your laundry in the wardrobe without ironing.

7 1000 190

Synthetic Iron Dry

You may dry your synthetic laundry to be ironed

in this programme to have them slightly damp for

ease of ironing. (Shirt, T-shirt, tablecloth, etc.)

3,5 800 59

Synthetic Cupboard

Dry

You may dry all your synthetic laundry in this

programme. (Shirt, T-shirt, underwear, tablecloth,

etc.) You can put your laundry in the wardrobe

without ironing.

3,5 800 70

Sport

You may dry your sports clothes that are

appropriate for tumble drying in this programme.

4 1000 110

Freshen up

It just provides airing for 10 minutes without any

hot air. You can air the cotton and linen laundry that

have been stored for a long time , and eliminate the

odour in them.

- - 10

Time Programmes

You may select from time programmes between

30 and 60 minutes to achieve the desired drying

level at low temperature. In this programme, tumble

drier’s operation lasts for the set time independently

from the dryness of laundry.

- - -

Mix

Use this programme to dry non-pigmenting

synthetic and cotton laundry items together.

4 1000 120

Babyprotect

Program used for baby clothing with can be dried

approval on the label.

3 1000 90

Jeans

You may dry denim pants, skirts, shirts or jackets in

this programme.

4 1200 125

Gentle Care / Shirts

It dries the shirts in a more sensitive manner, and

causes less creasing and easier ironing.

2 600 55

Express Super Short

Dries shirts more delicately and thus causes less

wrinkles for easy ironing.

0,5 1200 30

5.4 Programme selection and consumption table

Dryer / User Manual

Energy consumption values

Programmes Capacity (kg)

Spin speed

in washing

machine

(rpm)

Approximate

amount of

remaining humidity

Energy

consumption

value kWh

Cotton cupboard dry* 7 1000 60% 1,71

Cotton Iron dry 7 1000 60% 1,3

Synthetic cupboard dry 3,5 800 40% 0,59

“Cotton cupboard dry programme” used at full and partial load is the standard drying programme

to which the information in the label and the fiche relates, that this programme is suitable for drying

normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption

for cotton.

* : Energy Label standard programme (EN 61121:2012)

All the values on the chart are identified according to EN 61121:2012 standard. Consumption

values may vary from the values in the chart depending on laundry type, wringing speed, ambient

conditions and voltage levels.

5.5 Auxiliary functions

Audible warning

Drying machine makes an audible warning

when the programme is completed. If you don’t

want it to make an audible warning, press the

“Buzzer” button. When you press the Buzzer

button, a light will illuminate and no audible

warning will be made when the programme

ends.

NOTE

• You can select this function before or

after the programme starts.

End time

If you prefer to dry your laundry at a later time,

you can delay start time of the programme up

to 3 hours, 6 hours or 9 hours using the Delay

function.

Open the loading door and place the laundry.

Select the drying programme.

Press the End Time selection button and

set the delay time you wish. When the End

Time button is pressed once, 3 hours delay is

selected and the delay indicator will light up.

If you press the same button again, 6 hours

delay will be selected and when you press for

the third time, 9 hours delay will be selected. If

you press the End Time button once again, the

delay will be cancelled.

After the End Time selection is made, start

delayed running for the programme selected

pressing the “Start/Stand-by” button.

NOTE

• You can add or remove laundry within

end time. At the end of the Time Delay

countdown, the Time Delay warning

indicator turns off and drying begins

Changing the end time

If you want to change the duration during the

countdown:

Cancel the programme by turning the On/

Off/Programme selection knob. Select the

programme you want and repeat the End Time

selection process.

Cancelling the end time function

If you want to cancel the end time countdown

and start the programme immediately:

Cancel the programme by turning the On/

Off/Programme selection knob. Select the

programme you want and press the Start/

Dryer / User Manual

Stand-by button.

5.6 Warning indicators

NOTE

• Warning indicators may vary depending

on the model of your dryer.

Filter cleaning

When the programme is completed, the

warning indicator for filter cleaning turns on.

Water tank

If the water tank fills up while the programme

continues, the warning indicator starts flashing

and the machine goes into stand-by. In this

case, empty the water tank and start the

programme by pressing the Start / Stand-

by button. Warning indicator turns off and

programme resumes.

Filter drawer /Heat exchanger cleaning

When the programme is finished, the cleaning

symbol of the heat exchanger or filter drawer

may light up.

5.7 Starting the programme

Press the Start/Stand-by button to start the

programme.

Drying indicator will light up, indicating that the

programme has started.

5.8 Child Lock

The drying machine has a child lock which

prevents the programme flow from being

interrupted when the buttons are pressed

during a programme. When the child lock

is activated, all buttons on the panel except

the On/Off/Programme selection knob are

deactivated.

Press the End Time and Buzzer buttons

simultaneously for 3 buttons to activate the

child lock.

The child lock has to be deactivated to be able

to start a new programme after the current

programme is finished or to be able to interfere

with the programme. To deactivate the child

lock, keep the same buttons pressed for 3

seconds.

NOTE

• When the child lock is activated, the child

lock warning indicator on the screen

turns on.

• Child lock deactivates when the drying

machine is turned off and on by the On/

Off/Cancel knob.

When the child lock is active:

When the drying machine runs, or in stand-

by state, the indicator symbols won’t change

upon changing the position of the programme

selection knob.

NOTE

• When the drying machine runs and the

child lock is active, it beeps twice when

the programme selection knob is turned.

If the child lock is deactivated without

returning the programme selection knob

to its previous position, programme

will terminate due to the change in the

programme selection knob position.

5.9 Changing the programme after it

is started

You can change the programme you selected

to dry your laundry with a different programme

after the drying machine starts running

• For instance, select Extra Dry programme

by turning the On/Off/Programme

selection knob to select Extra Dry instead

of Iron Dry.

• Press the Start/Stand-by button to start

the programme.

Adding and removing clothes during

stand-by

If you want to add or remove clothes to/from

the drying machine after the drying programme

starts:

• Press the Start/Stand-by button to put

the drying machine in Stand-by state. The

drying operation stops.

• Open the loading door while in Stand-

by state, and close the door after you

remove or add laundry.

• Press the Start/Stand-by button to start

the programme.

Dryer / User Manual

NOTE

• Adding laundry after the drying operation

starts may cause the dried laundry inside the

machine to mix with wet laundry and leave

the laundry damp at the end of operation.

• Adding or removing laundry during drying

may be repeated as many times as you

wish. But this operation continuously

interrupts the drying operation, and thus

increases programme duration and energy

consumption. So, it is recommended to add

laundry before the programme starts.

• If a new programme is selected by turning

the programme selection knob while the

drying machine is in stand-by, the running

programme terminates.

WARNING!

• Do not touch the inner surface of the

drum while adding or removing clothes

during a continuing programme. The

drum surface is hot.

5.10 Cancelling the programme

If you want to cancel the programme and

terminate the drying operation for any reason after

the drying machine starts running, turn the On/Off/

Cancel knob, the programme will be cancelled.

WARNING!

• The inside of the drying machine shall

be extremely hot when you cancel the

programme during machine operation, so

run the refresh programme to allow it to cool

down.

5.11 End of programme

When the program ends, the Last/Anti-Wrinkle

and Fibre Filter Cleaning Warning LEDs on

the program follow up indicator will illuminate.

Loading door may be opened and the dryer

machine becomes ready for another run.

Bring the On/Off/Programme selection knob to

On/Off position to turn the drying machine off.

NOTE

• If the laundry is not removed after the

programme is completed, the wrinkle

prevention function activates for 2 hours

to prevent the laundry inside the machine

to get wrinkled. The programme tumbles

the laundry with 10-minute intervals to

prevent them from wrinkling.

Dryer / User Manual

6 Maintenance and cleaning

Service life of product extends and frequently

experienced problems will be reduced if it is

cleaned at regular intervals.

WARNING!

• Please unplug your product before

performing maintenance and cleaning

instructions. (eg control panel, body, etc.)

6.1 Cleaning Lint Filter / Loading

Door Inner Surface

Lint and fiber released from the laundry to the

air during the drying cycle are collected in the

Lint Filter.

NOTE

• You can clean the lint filter housing with a

vacuum cleaner.

WARNING!

• Always clean the lint filter and the inner

surfaces of the loading door after each

drying process.

To clean the lint filter:

• Open the

loading door.

• Remove the

lint filter by

pulling it up

and open the

lint filter.

• Clean lint, fiber, and cotton raveling by

hand or with a soft piece of cloth.

• Close the lint filter and place it back into

its housing.

A layer can build up

on the filter pores that

can cause clogging

of the filter after using

the dryer for a while.

Wash the lint filter with

warm water to remove

the layer that builds

up on the lint filter

surface. Dry the lint

filter completely before

reinstalling it.

• Clean the entire inner surface of the

loading door and loading door gasket

with a soft damp cloth.

6.2 Cleaning the sensor

There are

dampness sensors

in the dryer that

detect whether

the laundry is dry

or not.

To clean the

sensors:

• Open the loading door of the dryer.

• Allow the machine to cool down if it is still

hot due to the drying process.

• Wipe the metal surfaces of the sensor

with a soft cloth, dampened with vinegar

and dry them.

NOTE

• Clean metal surfaces of the sensors 4

times a year.

• Do not use metal tools when cleaning

metal surfaces of the sensors.

Dryer / User Manual

WARNING!

• Never use solvents, cleaning agents or

similar substances for cleaning due to the

risk of fire and explosion!

6.3 Draining the water tank

Dampness of the laundry is removed and

condensed during drying process and the

water that arise accumulates in the water tank.

Drain the water tank after each drying cycle.

WARNING!

• Condensed water is not drinkable!

• Never remove the water tank when the

program is running!

If you forget to drain the water tank, the

machine will stop during the subsequent drying

cycles when the water tank is full and the Water

Tank warning symbol will flash. If this is the

case, drain the water tank and press Start /

Pause button to resume the drying cycle.

To drain the water tank:

1. Remove the water tank in the drawer

or container carefully.

2. Drain the water in the tank.

• If there is lint accumulation in the funnel

of the water tank, clean it under running

water.

• Place the water tank into its seat.

NOTE

• If the direct water draining is used as an

option, there is no need to empty the

water tank.

6.4 Cleaning the filter drawer

Lint and fiber that could not be captured by the

lint filter are blocked in the filter drawer behind

the kick plate. Clean the filter periodically when

there is visible air collection on it or when

the symbol lights up, if there is a filter drawer

cleaning warning symbol available.

There is an one stage filter. This one stage filter

is from sponge

To clean the filter drawer:

• Press the kick

plate button to

open the kick

plate.

• Open the filter drawer cap turning the

cap lock on it and pull it out..

• Open the filter

drawer by

pressing the red

button.

• Take out the filter

drawer sponge.

Dryer / User Manual

• Clean the fluff and lint over the filter

sponge washing it with your hands.

Remove the moisture squeezing the

sponge with your hands after washing it.

• Clean the fluff, lint and cotton pellets with

your hands or with a soft cloth.

• If you observe a

layer over the filter

which can block

the filter, remove

the layer washing

with a water and

then cleaning it.

Dry the filter cloth

properly before

replacing the filter

drawer.

NOTE

• There may be no cloth in the filter

cassette of your drying machine,

depending on its model.

• Place the sponge

back into its

place.

NOTE

• Please place the sponge carefully inside

the frame of the filter cassette shown by

arrows in order to avoid squeezing when

filter drawer closed”.:

• Close the filter

drawer as to lock

the red button.

• Replace the filter drawer and tighten the

cap turning the filter drawer lock turning it

in the arrow direction.

• Close the kick plate

cover.

WARNING!

• Drying without the filter drawer sponge in

place will damage the machine!

NOTE

• A dirty lint filter and filter drawer will cause

longer drying periods and higher energy

consumption.

6.5 Cleaning the evaporator

• Clean the lint

accumulated

on the fins of

the evaporator

located behind

the filter drawer

with a vacuum

cleaner.

WARNING!

• You can also clean by hand provided that

you wear protective gloves. Do not attempt

to clean with bare hands. Evaporator fins

can harm your hand.

Dryer / User Manual

7 Troubleshooting

Drying operation takes too long.

Fibre filter pores might be clogged. >>> Wash the filter with

warm water.

Filter drawer might be clogged. >>> Clean the sponge and

filter cloth (if any) in the filter drawer. (for the products with a

heat pump)

The condenser might be blocked. >>> Wash the

condenser.(for the products with a condenser )

The ventilation grills in front of the machine may be closed.

>>> Remove any objects in front of the ventilation grills that

blocks air.

Ventilation may be inadequate because the area the

machine is installed in is too small. >>> Open the door or

windows to prevent the room temperature from rising very

high.

A lime layer may have accumulated on the humidity

or temperature sensors. >>> Clean the humidity or

temperature sensors.

Excessive amount of laundry might be loaded. >>> Do not

load the drying machine excessively.

Laundry might not have been wrung adequately. >>>

Perform a higher speed wringing on the washing machine.

Clothes come out damp after drying.

A program not suitable for the laundry type may have been

used.>>> Check the maintenance labels on the clothes and

select a program suitable for the clothes’ type or use time

programs as extra.

Fibre filter pores might be clogged. >>> Wash the filter with

warm water.

The condenser might be blocked. >>> Wash the

condenser. (for the products with a condenser)

Filter drawer might be clogged. >>> Clean the sponge and

filter cloth (if any) in the filter drawer.(For the products with a

heat pump)

Excessive amount of laundry might be loaded. >>> Do not

load the drying machine excessively.

Laundry might not have been wrung adequately. >>>

Perform a higher speed wringing on the washing machine.

Drying machine does not turn on or program cannot be

started. Drying machine does not run after it is configured.

Power plug might be unplugged. >>> Make sure the power

cord is plugged in.

Loading door might be open. >>> Ensure that the loading

door is properly closed.

A program might not be set or Start/Stand-by button might

not be pressed. >>> Check that the program is set and it is

not in Stand-by position.

Child lock may be activated. >>> Turn off the child lock.

Program terminated prematurely for no reason.

Loading door might not be closed completely. >>> Ensure

that the loading door is properly closed.

There might be a power outage. >>> Press the Start/Stand-

by button to start the program.

Water tank may be full. >>> Empty the water tank.

Clothes have shrunk, hardened or spoiled.

A program not suitable with the laundry type might have

been used. >>> Check the maintenance labels on the

clothes and select a program suitable for the clothes.

The lighting inside the drying machine does not turn on. (For

models with a lamp)

Drying machine might not be turned on with the On/Off

button or program might not be selected for machines

without an On/Off button. >>> Make sure that the drying

machine is turned on.

Lamp might be malfunctioning. >>> Contact Authorized

Service to replace the lamp.

Filter cleaning warning symbol/LED is on/flashing.

Fibre filter might not be cleaned. >>> Clean the filter.

The filter slot might be clogged with lints. >>> Clean the

filter slot.

A layer of fluff might have accumulated clogging up the lint

filter pores. >>> Wash the filter with warm water.

The condenser might be blocked. >>> Wash the

condenser.

Water drips from the loading door.

Fibres might have gathered on the inner sides of the loading

door and the loading door gasket. >>> Clean the inner

surfaces of the loading door and the loading door gasket

surfaces.

Loading door opens by itself.

Loading door might not be closed completely. >>> Push the

loading door until the closing sound is heard.

Water tank warning symbol / led is on/flashing.

Water tank may be full. >>> Empty the water tank.

Water discharge hose might have collapsed. >>> If the

product is connected directly to the water drain check the

water discharge hose.

Steam symbol is flashing.(For the products with a steam

function)

Steam tank may be empty => Fill the steam tank with

distilled or condensed water.

Steam programs do not start (For the products with a steam

function)

Steam tank may be empty, steam tank warning icon may

light up on the screen => Fill the steam tank until the steam

icon goes off.

Wrinkles are not removed with wrinkle removing program.

(For the products with a steam function)

Excess amount of laundry may have been placed => Place

specified amount of laundry.

Steam application time may be selected in low level =>

Choose a program with high amount of steam.

After completion of the program, the laundry may have

stayed in the machine for a long time => Take the laundry

out as soon as the program finishes, and hang it out.

Laundry odour not lessened with the odour removal

program.(For the products with an odour removal program)

Excess amount of laundry may have been placed => Place

specified amount of laundry.

Steam application time may be selected in low level =>

Choose a program with high amount of steam.

WARNING!

• If the problem persists after following the

instructions in this section, contact your vendor

or an Authorized Service. Never try to repair your

product yourself.

NOTE

• In an event that you encounter an issue on any part

on your appliance, you can ask for a replacement

by contacting the authorized service with the

appliance model number.

• Operating the appliance with non-authentic parts

may lead the appliance to malfunction.

• Manufacturer and distributor are not liable for

malfunctions resulting from using non-authentic

parts.

Leht laadib ...

Beko DH 7411 PA Kasutusjuhend

Bränd: Beko

Mudel: DH 7411 PA

Kategooria: Trummelkuivatid

Tüüp: Kasutusjuhend

Laadige alla PDF

aruanne

teistes keeltes

English: Beko DH 7411 PA User manual

Beko DH 7411 PA Kasutusjuhend

Beko DH 7411 PA Kasutusjuhend

teistes keeltes

Muud dokumendid