McCulloch CS 380 Omaniku manuaal

Tüüp
Omaniku manuaal

See käsiraamat sobib ka

CS 340, CS 380
EN Operator's manual 13-27
BG Ръководство за експлоатация 28-44
BS Korisnički priručnik 45-59
CS Návod k použití 60-74
DA Brugsanvisning 75-89
DE Bedienungsanweisung 90-105
EL Οδηγίες χρήσης 106-122
ES Manual de usuario 123-138
ET Kasutusjuhend 139-152
FI Käyttöohje 153-166
FR Manuel d'utilisation 167-182
HR Priručnik za korištenje 183-196
HU Használati utasítás 197-211
IT Manuale dell'operatore 212-227
LT Operatoriaus vadovas 228-242
LV Lietošanas pamācība 243-257
NL Gebruiksaanwijzing 258-273
NO Bruksanvisning 274-287
PL Instrukcja obsługi 288-303
PT Manual do utilizador 304-319
RO Instrucţiuni de utilizare 320-335
RU Руководство по эксплуатации 336-352
SK Návod na obsluhu 353-367
SL Navodila za uporabo 368-382
SR Priručnik za rukovaoca 383-397
SV Bruksanvisning 398-411
TR Kullanım kılavuzu 412-426
UK Посібник користувача 427-442
P02138MC
30
3
1
28
29
16
18
25 23
22
21
20
17
19
24
15
13
26
14
27
2
5
3
12
10
1
4
7
9
11
6
8
1
2 3 4 5 6 7
8 9 10 11 12 13
14 15 16 17
NOISE dBA
18 19
20 21 22
23 24
25 26
27 28
1
2
2
1
3
29 30
31 32
33 34
35 36
37 38
A
B
39
A
40
41 42
43 44
45 46
47
A
48
49 50
51 52
53 54
55 56
57 58
59 60
61 62
63 64
X
65
Y
66
67 68
69 70
71 72
73 74
75 76
77 78
79
A
80
C
D
81 82
A
B
C
83
A
84
A
85 86
Ø
87
A
88
A
B
C
89 90
91 92
93 94
95 96
97 98
Contents
Introduction................................................................... 13
Safety............................................................................14
Assembly...................................................................... 18
Operation...................................................................... 19
Maintenance................................................................. 21
Transportation...............................................................24
Storage......................................................................... 24
Technical data.............................................................. 24
Accessories.................................................................. 25
Contents of the EC Declaration of Conformity..............26
Introduction
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
(Fig. 1)
1. Cylinder cover
2. Primer bulb
3. Stop switch
4. Choke control
5. Right hand guard
6. Information and warning decal
7. Fuel tank
8. Idle adjustment screw
9. Starter handle
10. Starter
11. Chain oil tank
12. Product and serial number plate
13. Chain tensioning screw (CS 340)
14. Sprocket cover (CS 340)
15. Trigger lockout
16. Front handle
17. Chain brake and front hand guard
18. Muffler
19. Guide bar
20. Bar nose sprocket
21. Saw chain
22. Spiked bumper (Available as an accessory)
23. Knob (CS 380)
24. Chain catcher
25. Chain tensioner wheel (CS 380)
26. Sprocket cover (CS 380)
27. Combination tool
28. Trigger
29. Guide-bar cover
30. Operator's manual
31. Combination tool
Symbols on the product
(Fig. 2) Warning
(Fig. 3) Read this manual
(Fig. 4) Use approved head protection, hearing
protection and eye protection
(Fig. 5) Use approved protective gloves
(Fig. 6) The product agrees with the applicable EC
Directives
(Fig. 7) Sound power level
(Fig. 8) Chain brake, not engaged (left). Chain
brake, engaged (right)
(Fig. 9) Choke control
(Fig. 10) Air purge bulb
(Fig. 11) Refuelling
(Fig. 12) Chain oil fill
(Fig. 13) This product agrees with the applicable EAC
directives
(Fig. 14) This product agrees with the applicable
Ukraine directives
(Fig. 15) This product agrees wtih the applicable
Korea directives
(Fig. 16) This product agrees wtih the applicable
Japan directives
(Fig. 17) Noise level
(Fig. 18) Hold the product properly with both hands
(Fig. 19) Do not use with one hand
280 - 007 - 14.10.2019 13
(Fig. 20) Avoid contact with nose of guide bar
(Fig. 21) Beware of kickback
(Fig. 22) This product agrees with the applicable
Australia and New Zealand electromagnetic
compatibility directives.
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING: Injury to persons.
CAUTION: Damage to the product.
Note: This information makes the product easier to use.
General safety instructions
Use the product correctly. Injury or death is a
possible result of incorrect use. Only use the product
for the tasks found in this manual. Do not use the
product for other tasks.
Read, understand and obey the instructions in this
manual. Obey the safety symbols and the safety
instructions. If the operator does not obey the
instructions and the symbols, injury, damage or
death is a possible result.
Do not discard this manual. Use the instructions to
assemble, to operate and to keep your product in
good condition. Use the instructions for correct
installation of attachments and accessories. Only
use approved attachments and accessories.
Do not use a damaged product. Obey the
maintenance schedule. Only do the maintenance
work that you find an instruction about in this
manual. An approved service center must do all
other maintenance work.
This manual cannot include all situations that can
occur when you use the product. Be careful and use
your common sense. Do not operate the product or
do maintenance to the product if you are not sure
about the situation. Speak to a product expert, your
dealer, service agent or approved service center for
information.
Disconnect the spark plug cable before you
assemble the product, put the product into storage or
do maintenance.
Do not use the product if it is changed from its initial
specification. Do not change a part of the product
without approval from the manufacturer. Only use
parts that are approved by the manufacturer. Injury
or death is a possible result of incorrect
maintenance.
Do not breathe in the exhaust fumes from the
engine. A health risk can occur if you breathe in
exhaust fumes, chain oil fumes and sawdust for a
long period.
Do not start the product indoors or near flammable
material. The exhaust fumes are hot and can contain
a spark which can start a fire. Without sufficient
airflow, injury or death can result from asphyxiation
or carbon monoxide.
This product makes an electromagnetic field during
operation. The electromagnetic field can cause
damage to medical implants. Speak to your
physician and medical implant manufacturer before
you operate the product.
Do not let a child operate the product.
Do not let a person, without knowledge of the
instructions, operate the product.
Always monitor a person, with decreased physical
capacity or mental capacity, that uses the product. A
responsible adult must be there at all times.
Lock the product in an area that children and not
approved persons cannot access.
The product can eject objects and cause injuries.
Obey the safety instructions to decrease the risk of
injury or death.
Do not go away from the product when the engine is
on. Stop the engine and make sure that the chain
does not rotate.
The operator of the product is responsible if an
accident occurs.
14
280 - 007 - 14.10.2019
Make sure that parts are not damaged before you
use the product.
Refer to national or local laws. They can prevent or
decrease the operation of the product in some
conditions.
Safety instructions for operation
Continuous or regular operation of the product can
cause "white finger" or equivalent medical problems
from vibrations. Examine the condition of your hands
and fingers if you operate the product continuously
or regularly. If your hands or fingers have
discoloration, have pain, tingle, or are numb, stop
work and speak to a physician immediately.
Make sure the product is fully assembled before you
use it.
The product can cause objects to eject, which can
cause damage to the eyes. Always use approved
eye protection when you operate the product.
Be careful, a child can come near the product
without your knowledge during operation.
Do not operate the product if there are persons in
the work area. Stop the product if a person goes into
the work area.
(Fig. 23)
Make sure that you are always in control of the
product.
The product must be operated with two hands. Do
not operate the product with one hand. Serious injury
to the operator, workers, bystanders, or a
combination of these persons may result from
operation with only one hand.
Hold the front handle with your left hand and the rear
handle with your right hand. Hold the product on the
right side of your body.
(Fig. 24)
Do not operate the product when you are fatigued, ill
or under the influence of alcohol or other drugs.
Do not use the product if you cannot receive aid if an
accident occurs. Make others aware that you will
operate the product before you start the product.
Do not turn with the product before you make sure
that no persons or animals are in the safety area.
Remove all unwanted materials from the work area
before you start. If the chain hits an object, the object
can eject and cause injury or damage. Unwanted
material can wind around the chain and cause
damage.
Do not use the product in bad weather, such as fog,
rain, strong winds, risk of lightning or other weather
conditions. Dangerous conditions, such as slippery
surfaces, can occur because of bad weather.
Make sure that you can move freely and work in a
stable position.
Make sure that you cannot fall when you use the
product. Do not tilt when you operate the product.
Always hold the product with your two hands. Hold
the front handle with your left hand and the rear
handle with your right hand. Hold the product on the
right side of your body.
The saw chain starts to rotate if the choke control is
in the choke position when the engine starts.
Stop the engine before you move the product.
Do not put down the product with the engine on.
Before you remove the unwanted materials from the
product, stop the engine. Let the chain stop before
you or an aid remove the cut material.
Do not operate this product in a tree. Operation of
the product while up in a tree may result in personal
injury.
(Fig. 25)
The chain brake must be engaged when the product
is started to decrease the risk that the saw chain
touches you during start.
(Fig. 26)
A kickback can cause serious injury or death to the
operator or others. To decrease the risk you must
know the causes of kickback and how to prevent
them.
Obey all safety instructions to decrease the risk of
kickback and other forces which can cause serious
injury or death.
Adjust the saw chain tension regularly to make sure
that the saw chain does not slack. A slack saw chain
may jump off and cause serious injury or death.
Do not fell trees using an incorrect procedure. This
can cause injury to persons, hit a utility line or cause
damage to property.
The operator should remain on the uphill side of the
terrain as the tree is likely to roll or slide downhill
after it is felled.
(Fig. 27)
Plan and prepare your path of retreat before you
start to cut. Your path of retreat must be
approximately 135 degrees away from the felling
direction.
1. The danger zone
2. The path of retreat
3. The felling direction
(Fig. 28)
Always stop the engine before you move the
product.
Make sure you firmly plant your feet on the ground
and distribute your weight evenly.
(Fig. 29)
Only operate the product with your feet on stable
ground. Without stable ground, operation can cause
serious injury or death to the operator or others. Do
not do operate the product on a ladder or in a tree.
(Fig. 30)
280 - 007 - 14.10.2019
15
Kickbacks, skating, bouncing and dropping
Different forces can have an effect on the safe control of
the product.
Skating is when the guide bar glides or moves
quickly across the wood.
Bouncing is when the guide bar lifts off the wood and
touches it again and again.
Dropping is when the product drops down after the
cut is made. This can cause the moving chain to
touch a part of the body or other objects, causing
injury or damage.
Kickback is when the end of the guide bar touches
objects and moves rearward, up or suddenly
forward. Kickback also occurs when the wood closes
in and pinches the saw chain during the cut. Loss of
control can result if the product touches an object in
wood.
(Fig. 31)
Rotational Kickback can occur when the moving
chain touches an object at the top of the guide
bar. This can cause the chain to bury into the
object and cause the chain to stop immediately.
The result is a very fast, reverse reaction that
moves the guide bar up and rearward in the
direction of the operator.
(Fig. 32)
(Fig. 33)
Pinch-Kickback can occur when the saw chain
suddenly stops during the cut. The wood closes
in and pinches the moving saw chain along the
top of the guide bar. The sudden stop of the
chain reverses the chain force and causes the
product to move in the opposite direction of the
turn of the chain. The product moves rearward in
the direction of the operator.
(Fig. 34)
Pull-In can occur when the saw chain suddenly
stops when the moving chain touches an object
in the wood along the bottom of the guide bar.
The sudden stop pulls the product forward and
away from the operator, which can easily cause
the loss of control of the product by the operator.
(Fig. 35)
Make sure that you understand the different forces and
how to prevent them before you operate the product.
To prevent kickbacks, skating, bouncing and
dropping
While the engine runs, make sure to hold the product
tightly. Keep your right hand on the rear handle and
the left hand on the front handle. Tightly hold with
thumbs and fingers around the handles. Do not let
go.
Keep control of the product during the cut and after
the wood falls to the ground. Do not let the weight of
the product drop down after the cut is made. (Fig.
36)
Make sure that the area in which you are cutting is
free from blockage. Do not let the nose of the guide
bar touch a log, branch or other blockages while you
operate the product.
Cut at high engine speeds.
Do not overreach or cut above shoulder height. (Fig.
37)
Obey the manufacturer's sharpening and
maintenance instructions for the saw chain.
Only use replacement guide bars and saw chains
specified by the manufacturer.
The risk of kickback is increased if the depth gauge
setting is too large.
Personal protective equipment
Always use the correct personal protective
equipment when you operate the product. The
personal protective equipment does not erase the
risk of injury. The personal protective equipment
decreases the grade of injury if an accident occurs.
Generally, clothes should be close-fitting without
restricting your freedom of movement.
Use an approved protective helmet.
Always use approved ear protection while you
operate the product. Noise for a long period can
cause hearing loss.
Use protective glasses or a face visor to reduce the
risk of injury from thrown objects. The product is
capable of throwing objects, such as wood chips,
small pieces of wood, etc., at great force. This can
result in serious injury, especially to the eyes.
Use gloves with chainsaw protection.
Use trousers with chainsaw protection.
Use boots with chainsaw protection, steel toe-cap
and non-slip sole.
Make sure that you have a first aid kit near.
Sparks can come from the muffler, the guide bar and
saw chain or other sources. Always have fire
extinguishing tools and a shovel available to help
prevent forest fires.
Protective devices on the product
Make sure that you regularly do the maintenance to
the product.
The life of the product increases.
The risk of accidents decreases.
Let an approved dealer or an approved service
center regularly examine the product to do
adjustments or repairs.
Do not use a product with damaged protective
equipment. If the product is damaged, speak to an
approved service center.
16 280 - 007 - 14.10.2019
Stop switch
Start the engine. Make sure that the engine stops when
you move the stop switch to the stop position.
To examine the throttle trigger lockout
1. Make sure that the trigger (B) is locked at idle when
you release the trigger lockout (A). (Fig. 38)
2. Push the trigger lockout (A) and make sure that it
goes back to its initial position when you release it.
3. Push the trigger (B) and make sure that it goes back
to its initial position when you release it.
4. Start the engine, and then apply full speed.
5. Release the trigger and examine if the saw chain
stops.
6. If the saw chain turns with an idle engine, examine
the idle adjustment screw of the carburetor.
Guard
The guard prevents objects from being ejected in the
direction of the operator. The guard also prevents
accidental touch between the operator and the saw
chain.
Make sure that the guard is permitted for operation
in combination with the product.
Do not use the product without the guard.
Make sure that the guard is not damaged. Replace
the guard if it is worn or has cracks.
Fuel safety
Do not start the product if there is fuel or engine oil
on the product. Remove the unwanted fuel/oil and let
the product dry. Remove unwanted fuel from the
product.
If you spill fuel on your clothing, change clothing
immediately.
Do not get fuel on your body, it can cause injury. If
you get fuel on your body, use a soap and water to
remove the fuel.
Do not start the engine if you spill oil or fuel on the
product or on your body.
Do not start the product if the engine has a leak.
Examine the engine for leaks regularly.
Be careful with fuel. Fuel is flammable and the fumes
are explosive and can cause injuries or death.
Do not breathe in the fuel fumes, it can cause injury.
Make sure that there is a sufficient airflow.
Do not smoke near the fuel or the engine.
Do not put warm objects near the fuel or the engine.
Do not add the fuel when the engine is on.
Make sure that the engine is cool before you refuel.
Before you refuel, open the fuel tank cap slowly and
release the pressure carefully.
Do not add fuel to the engine in an indoor area. Not
sufficient airflow can cause injury or death because
of asphyxiation or carbon monoxide.
Tighten the fuel tank cap carefully or a fire can
occur.
Move the product at a minimum of 3 m (10 ft) from
the position where you filled the tank before a start.
Do not put too much fuel in the fuel tank.
Make sure that a leak cannot occur when you move
the product or fuel container.
Do not put the product or a fuel container where
there is an open flame, spark or pilot light. Make
sure that the storage area does not contain an open
flame.
Only use approved containers when you move the
fuel or put the fuel into storage.
Empty the fuel tank before long-term storage. Obey
the local law on where to dispose fuel.
Clean the product before long-term storage.
Remove the spark plug cable before you put the
product into storage to make sure that the engine
does not start accidentally.
Safety instructions for maintenance
Disconnect the spark plug before doing maintenance
on the product, not including carburetor adjustments.
Have all product servicing done by an approved
dealer, not including the tasks in
Technical data on
page 24
.
Make sure the saw chain stops moving when the
throttle trigger is released.
Keep the handles dry, clean, and free from oil or fuel
mixture.
Keep caps and fasteners correctly tightened.
Replacement components that are not approved or
the removal of safety devices can cause damage to
the product. This can also cause possible injury to
the operator or bystanders. Only use accessories
and replacement parts as recommended. Do not
change your product.
Keep the saw chain sharp and clean for safe and
high performance.
Obey the instructions for lubricating and changing
accessories.
Examine the product for damaged parts. Before
more use of the product, make sure the damaged
guard or part operates correctly. Examine for broken
or incorrectly aligned parts, and parts that do not
move freely. Examine for other conditions that can
have an effect on the operation of the product. Make
sure the product is correctly installed. A guard or
other damaged part must be repaired or replaced by
an approved dealer unless written in the operator’s
manual.
When not in operation, keep the product in a dry,
high or locked area away from children.
During transportation or storage of the product, use
a transportation guard or case to move the product.
Do not use waste oil. Waste oil can be dangerous to
you and can cause damage to the product and
environment.
280 - 007 - 14.10.2019
17
Assembly
WARNING: Read and understand the safety
chapter before you assemble the product.
To assemble the guide bar and saw
chain (standard chain adjustment)
1. Remove the spark plug cap from the spark plug
during assembly to prevent an accidental start.
2. Remove the bar nuts and the sprocket cover.
Remove the transportation guard (A). (Fig. 39)
3. Put the guide bar above the bar bolts. Steer the
guide bar to its most rear position. (Fig. 40)
4. Put on protective chainsaw gloves.
5. Lift the saw chain above the drive sprocket and
engage it in the groove on the guide bar. Start on the
top edge of the guide bar. (Fig. 41)
6. Make sure that the edges of the cutting links are
turned forward on the top edge of the guide bar.
7. Assemble the sprocket cover and steer the chain
adjuster pin to the hole in the guide bar.
8. Make sure that the drive links of the saw chain fit
correctly on the drive sprocket. Also make sure that
the saw chain is correctly engaged in the groove in
the guide bar.
9. Tighten the guide bar nuts with your fingers.
10. Tighten the saw chain by turning the chain
tensioning screw clockwise with the combination
wrench (Fig. 42). Tighten the saw chain until it does
not sag from below the guide bar, but you can turn it
easily by hand. (Fig. 43)
11. Hold up the end of the guide bar and tighten the bar
nuts with the combination wrench. (Fig. 44)
Examine the chain tension frequently after you
assemble a new saw chain and until the saw
chain has been run-in.
Examine the chain tension regularly. Correct
chain tension results in good cutting performance
and a long life.
To assemble the guide bar and saw
chain (knob and wheel chain
adjustment)
1. Move the front hand guard in the direction of the
front handle to disengage the chain brake.
2. Fold the knob out to open position. (Fig. 45)
3. Turn the knob counterclockwise to loosen the bar
cover. (Fig. 46)
4. Remove the knob (A) and the sprocket cover.
Remove the transportation guard, if installed. (Fig.
47)
5. Put the guide bar over the bar bolts. Steer the guide
bar to its most rear position. Put the chain over the
drive sprocket and engage it in the groove on the
guide bar. Start on the top edge of the guide bar.
(Fig. 48)
6. Make sure that the edges of the cutting links are
turned forward on the top edge of the guide bar.
7. Assemble the sprocket cover and steer the chain
adjuster pin to the hole in the guide bar. Make sure
that the drive links of the chain fit correctly on the
drive sprocket. Also make sure that the saw chain is
correctly engaged in the groove in the guide bar.
(Fig. 49)
8. Tighten the saw chain by turning the wheel down (+).
Tighten the chain until it does not sag from below of
the guide bar. (Fig. 50)
9. The saw chain is correctly tightened as it does not
sag from below the guide bar, but you can turn it
easily by hand.
10. Hold up the guide bar tip and turn the knob
clockwise to tighten it. (Fig. 51)
Examine the chain tension frequently after you
assemble a new saw chain and until the saw
chain has been run-in.
Examine the chain tension regularly. Correct
chain tension results in good cutting performance
and a long life.
To reset the chain brake
If the clutch cover is removed accidentally while the
chain brake is locked, the chain brake must be unlocked
so the clutch cover can be assembled without binding to
the clutch drum.
CAUTION:
The chain brake spring is under
tension. Use care when resetting the chain
brake.
Note: Do not hold the brake band while attempting to
reset it.
1. Align the notches on the bar tool so that they fit over
the brake rotating link. (Fig. 52)
2. To reset the brake, rotate the link clockwise until it
stops. The front link will be in its downward rotated
position when the chain brake is unlocked. (Fig. 53)
(Fig. 54)
18
280 - 007 - 14.10.2019
Operation
WARNING: Read and understand the safety
chapter before you operate the product.
To use fuel
CAUTION: This product has a two-cycle
engine. Use a mixture of gasoline and two-
cycle engine oil. Make sure to use the
correct quantity of oil in the mixture.
Incorrect ratio of gasoline and oil can cause
damage to the engine.
Fuel mixture ratio
The fuel mixture ratio for the gasoline and two-cycle
engine oil is 50:1 (2%)
Gasoline
Two-cycle engine oil
1 U.S. Gal. 77 ml (2.6 oz)
1 UK Gal. 95 ml (3.2 oz)
5 l 100 ml (3.4 oz)
To make the fuel mixture
1. Determine the correct quantity of gasoline and
engine oil (mixture ratio 50:1). Do not make more
than 30 days quantity of fuel mixture. See
To use
fuel on page 19
.
2. Add half of the gasoline quantity to a clean fuel
container with an antispill valve.
CAUTION:
Do not use gasoline with
more than 10% ethanol concentration
(E10). This can cause damage to the
product.
CAUTION: Do not use gasoline with an
octane number less than 90 RON (87
AKI). This can cause damage to the
product.
Note: Use gasoline with a higher octane number if
you frequently use the product at continuously high
engine speed.
3. Add the full quantity of the two-cycle engine oil to the
fuel container.
CAUTION: Always use air-cooled two-
cycled engine oil of high quality. Other
oils can cause damage to the product.
4. Shake the fuel mixture to mix the contents.
5. Add the remaining gasoline quantity to the fuel
container.
6. Shake the fuel mixture to mix the contents.
7. Fill the fuel tank of the product with the fuel mixture.
See
To use fuel on page 19
.
To fill the fuel tank
1. Make sure that the fuel mixture is correct and that
the fuel mixture is in a fuel container with an antispill
valve.
2. If fuel is on the container, remove the unwanted fuel
and let the container dry.
3. Make sure that the area near the fuel tank cap is
clean.
4. Remove the fuel tank cap.
5. Shake the fuel container before you add the fuel
mixture to the fuel tank.
6. Put back the fuel tank cap.
To lubricate the saw chain
The product has an automatic lubrication system. The
saw chain oil tank and the fuel tank are designed so that
the fuel runs out before the saw chain oil. This safety
feature requires that the correct chain oil is used and
that the instructions are obeyed.
1. Use vegetable-based saw chain oil or a standard
chain oil.
2. Make sure that the area near the cap of the saw
chain oil tank is clean.
3. Remove the cap of the saw chain oil tank.
4. Fill the saw chain oil tank with the recommended
saw chain oil.
5. Put back the cap of the saw chain oil tank.
To start and stop
Before you start the engine
Examine the product for missing, damaged, loose or
worn parts.
Examine the nuts, screws and bolts.
Examine the air filter.
Examine the trigger lockout and the trigger for
correct operation.
Examine the stop switch for correct operation.
Examine the product for fuel leaks.
Examine the saw chain sharpness and tension.
To start a cold engine
1. Move the front hand guard forward to engage the
chain brake. (Fig. 55)
2. Pull the choke control out fully. (Fig. 56)
280 - 007 - 14.10.2019
19
3. Push the air purge bulb 6 times. (Fig. 57)
4. Hold the body of the product on the ground with your
left hand.
5. Put your right foot through the rear handle.
6. Pull the starter rope handle slowly with your right
hand until you feel some resistance.
7. Pull the starter rope handle with force. (Fig. 58)
CAUTION: Do not pull the starter rope
until it stops. Do not let go of the starter
rope when it is fully extended. Release
the starter rope slowly. If you do not
obey these instructions, it can cause
damage to the engine.
Note: Do not pull the throttle trigger when you start
the engine.
8. Continue to pull the starter rope handle until the
engine starts or tries to start (pull max 5 times).
9. If the engine starts or tries to start, push the choke
control in to the half choke position. (Fig. 59)
10. Continue to pull until the engine starts.
11. Hold the rear handle with your right hand and the
front handle with your left hand. (Fig. 60)
12. Immediately pull the front hand guard rearward in the
direction of the front handle to disengage the chain
brake. (Fig. 61)
Note: The chain will move.
13. Run 20-30 seconds at elevated idle speed.
14. Pull the throttle trigger slowly but fully for 8-10
seconds, then release. (Fig. 62)
15. Run 10 seconds at normal idle speed.
16. Pull the throttle trigger slowly but fully for 5 seconds
to check acceleration, then release.
17. Use the product.
To start a warm engine
1. Move the front hand guard forward to engage the
chain brake.
2. Pull the choke control out fully.
3. Push the air purge bulb 6 times.
4. Push the choke control in fully.
5. Hold the body of the product on the ground with your
left hand.
6. Put your right foot through the rear handle.
7. Pull the starter rope handle slowly with your right
hand until you feel some resistance.
8. Pull the starter rope handle with force.
CAUTION: Do not pull the starter rope
until it stops. Do not let go of the starter
rope when it is fully extended. Release
the starter rope slowly. If you do not
obey these instructions, it can cause
damage to the engine.
Note: Do not pull the throttle trigger when you start
the engine.
9. Pull the starter rope handle until the engine starts.
10. Hold the rear handle with your right hand and the
front handle with your left hand.
11. Immediately pull the front hand guard rearward in the
direction of the front handle to disengage the chain
brake.
Note: The chain will move.
12. Wait 10-15 seconds.
13. Pull the throttle trigger lightly to set normal idle.
14. Use the product.
To start the engine when the fuel is too hot
If the product does not start, the fuel can be too hot.
Note: Always use new fuel and decrease the operation
time during warm weather.
1. Put the product in a cool area away from open
sunlight.
2. Let the product cool down for 20 minutes at
minimum.
3. Press the air purge bulb again and again for 10-15
seconds.
4. Obey the procedure to start a cold engine. Refer to
To start a cold engine on page 19
.
To stop the engine
Push the stop switch to stop the engine.
Note:
The stop switch automatically goes back to its
initial position.
To use a spiked bumper
A spiked bumper holds the wood as you cut. The spiked
bumper is a pivot between the engine body and the
guide bar.
1. Put the lower end of the spiked bumper at the
correct felling hinge width.
2. Push against the front handle with your left hand and
lift the rear handle with your right hand.
3. Cut until you get the correct felling hinge width.
Note:
The felling hinge must have an equal
thickness.
20 280 - 007 - 14.10.2019
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444

McCulloch CS 380 Omaniku manuaal

Tüüp
Omaniku manuaal
See käsiraamat sobib ka