Samsung UE40F5370SS Lühike juhend

BN68-04824E-03

LED TV

user manual

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. _____________

LED TV user manual

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com

BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)

www.samsung.com/be_fr (French)

BOSNIA 051 331 999 www.samsung.com

BULGARIA 07001 33 11 , share cost tariff www.samsung.com/bg

CROATIA 062 SAMSUNG (062 726 786) www.samsung.com/hr

CZECH 800 - SAMSUNG (800-726786) www.samsung.com

Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4

DENMARK 70 70 19 70 www.samsung.com

FINLAND 030-6227 515 www.samsung.com

FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY 0180 6 SAMSUNG bzw.

0180 6 7267864*

(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk

max. 0,60 €/Anruf)

www.samsung.com

CYPRUS 8009 4000 only from landline www.samsung.com/gr

GREECE 80111-SAMSUNG (80111 726 7864) only from land line

(+30) 210 6897691 from mobile and land line

www.samsung.com/gr

HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 261 03 710 www.samsung.com

MONTENEGRO 020 405 888 www.samsung.com

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com

NORWAY 815 56480 www.samsung.com

POLAND

0 801-172-678* lub +48 22 607-93-33 **

*(całkowity koszt połączenia jak za 1 impuls według taryfy operatora)

** (koszt połączenia według taryfy operatora)

www.samsung.com/pl

PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com

ROMANIA 08008 SAMSUNG (08008 726 7864)

TOLL FREE No.

www.samsung.com/ro

SERBIA 011 321 6899 www.samsung.com/rs

SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com

SPAIN 902172678 www.samsung.com

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com

SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch (German)

www.samsung.com/ch_fr (French)

U.K 0330 SAMSUNG (7267864) www.samsung.com

EIRE 0818 717100 www.samsung.com

LITHUANIA 8-800-77777 www.samsung.com/lt

LATVIA 8000-7267 www.samsung.com/lv

ESTONIA 800-7267 www.samsung.com/ee

TURKEY 444 77 11 www.samsung.com

[UF5370-ZH]BN68-04824E-03L16.indb 1 2013-11-14  9:33:44

English - 2

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

This symbol alerts you that important literature

concerning operation and maintenance has

been included with this product.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,

and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power

cord from the outlet before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under

environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local

electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and

contact an authorized dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially

when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the

insulation to deteriorate.

• Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity,

chemical substances and where it operates for 24 hours such as the aerial port, the train station etc.

• Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a ﬁre.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

[UF5370-ZH]BN68-04824E-03L16.indb 2 2013-11-14  9:33:45

English - 3

EnglishEnglish

Figures and illustrations in this User Manual are provided for reference only and may differ from the

actual product appearance. Product design and speciﬁcations may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is

manufactured for customers in EU region.

Features for your new TV

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With Smart Hub, users

can surf the web, download applications, and stay in touch with family and friends through social

networking services. In addition, you can enjoy photo, video, and music ﬁles stored on external storage

devices.

™ Press to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and

Twitter. You can also make video calls to friends by connecting the TV to a camera (sold separately).

Apps: Download and install applications such as WebBrowser.

On TV: Check a listing of programmes that are currently aerialing and are scheduled to aerial.

(Depending on the country)

Films and TV Shows: Purchase and watch movies and series without a separate external device.

(Depending on the country)

Photos, Videos & Music: Play back photo, video, and music ﬁles from an external storage device.

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support

Anynet+ with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page 10)

• Device Manager: Use the TV features with a USB keyboard and mouse.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,

USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle

them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government ofﬁce, for details of

where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its

electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other

household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery

contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these

substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them

through your local, free battery return system.

[UF5370-ZH]BN68-04824E-03L16.indb 3 2013-11-14  9:33:45

English - 4

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your

dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

[

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

• Remote Control & Batteries (AAA x 2) • Power Cord

• User Manual • Regulatory Guide

• Warranty Card (Not available in some locations)

Cable manager

Holder-Ring

(Depending on the Model)

CI Card Adapter IR Extension Cable

• An administration fee may be charged if either

− (a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual)

− (b) you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is

carried out.

Warning: Screens can be damaged

from direct pressure when handled

incorrectly. We recommend lifting the

TV by the edges, as shown.

Don't Touch

This Screen!

[UF5370-ZH]BN68-04824E-03L16.indb 4 2013-11-14  9:33:45

English - 5

EnglishEnglish

Using the Remote Control

Learn where the function buttons are on your remote. Especially note these: SOURCE, MUTE, Y,

< P >, MENU, TOOLS, E, INFO, CH LIST, RETURN, GUIDE and EXIT.

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used

by visually impaired persons.

Displays and selects the available video sources.

Turns the Set-top box on and off.

Returns to the previous channel.

Cuts off the sound temporarily.

Brings up Smart Hub applications. See the

e-Manual chapter, SMART TV Features > Smart

Hub.

Changes channels.

Exits the menu.

Displays the EPG (Electronic Programme Guide).

Displays information on the TV screen.

Turns the TV on and off.

Gives direct access to channels.

Adjusts the volume.

Opens the OSD (Menu).

Quickly selects frequently used functions.

Returns to the previous menu.

Use these buttons according to the directions on

the TV's screen.

Use these buttons in a speciﬁc feature. Use these

buttons according to the directions on the TV's

screen.

Moves the cursor, selects the on-screen menu

items, and changes the values seen on the TV's

menu.

Displays channel lists on the screen.

Alternately select Teletext ON Double, Mix or OFF.

SEARCH: Support to recommendation search

word and search function. See the e-Manual

chapter, SMART TV Features > Smart Hub >

Searching.

STATUS: Display the status and notiﬁcation

banner at the top of the screen.

MORE: Displays a virtual remote control on the

screen. See the e-Manual chapter, Controlling TV

> Using the Virtual Remote Control.

E-MANUAL: Displays the e-Manual.

RECOMMEND: Displays the recommended

programmes from among the programmes

currently being broadcast as well as

recommended applications are listed.

AD/SUBT.: Turns the audio description on and off

(not available in some locations). / Displays digital

subtitles. See e-Manual chapter TV Viewing >

Subtitles.

[UF5370-ZH]BN68-04824E-03L16.indb 5 2013-11-14  9:33:46

English - 6

Installing batteries (Battery size: AAA)

Match the polarity of the batteries to the symbols in the battery compartment.







✎

NOTE

− Use the remote control within 23 feet of the TV.

− Bright light may affect the performance of the remote control. Avoid using when near special

ﬂuorescent lights or neon signs.

− The colour and shape may vary depending on the model.

Turning on the TV

Turn on the TV using the P button on the remote control or TV panel.

✎

The product Colour and shape may vary depending on the model.

✎

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV

without the remote control.

mR

P

Function menu

TV Controller

The image is drawn by facing the front side

of the TV.

Remote control sensor

[UF5370-ZH]BN68-04824E-03L16.indb 6 2013-11-14  9:33:46

English - 7

EnglishEnglish

SETUP

The initial setup dialog appears when the TV is ﬁrst activated. Follow the on-screen instructions to ﬁnish the

initial setup process, including menu language choice, channel scan, network connection, and more. At

each step, either make a choice or skip the step. Users can manually perform this process at a later time

under the Screen Menu > System > Setup menu.

✎

If you connect any device to HDMI1 before starting the installation, the Channel Source will be

changed to Settop box automatically.

✎

If you do not want to select Set-top box, please select Aerial.

Switching Between Video Sources

Press SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press SOURCE

button. From the Source list, select HDMI2. The connector names may vary depending on the product.

Select Tools button at the upper-right corner of the screen to access the following functions.

• Information

View detailed information about the connected devices.

• Edit Name

You can rename devices connected to the TV to more easily identify external sources.

With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can

change Edit Name to PC.

With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you

can change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you

can change Edit Name to DVI Devices.

• Anynet+ (HDMI-CEC)

A list appears showing Anynet+ compatible ones of external devices connected to the TV.

✎

This function is only available Anynet+ (HDMI-CEC) function set to On.

• Disconnect USB Device

Remove the USB device from the list safely. This function is only available when the USB device

selected.

• Universal remote setup

To add a new external device to control it with the Remote Control, press the SOURCE button and

select Universal remote setup on the top right of the screen. Using the universal remote control, users

can control external devices connected to the TV, such as a settop box, Blu-ray player, and AV receiver.

[UF5370-ZH]BN68-04824E-03L16.indb 7 2013-11-14  9:33:46

English - 8

Universal Remote Control Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home

theatres, and other third-party external devices connected to the TV using the TV's remote control.

✎

Some or new models of the external device connected to the TV, may not be supported the

Universal remote setup.

Keep a distance of 5 cm at least between the IR Extender and the external device, as the illustration

shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should

be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with

the transmission of the remote control signal.

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press SOURCE

to bring up the Source screen.

2. Select Universal remote setup from the top of the screen. This initiates the universal remote setup

process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the

remote control by entering the model number manually.

[UF5370-ZH]BN68-04824E-03L16.indb 8 2013-11-14  9:33:46

English - 9

EnglishEnglish

Connecting to a COMMON INTERFACE slot (Your TV

viewing Card Slot)

✎

Turn the TV off to connect or disconnect a CI card or CI card adapter.

Attaching the CI Card Adapter

Attach the adapter as shown side.

✎

To install the CI CARD Adapter, please remove the

sticker attached to the TV.

To connect the CI CARD Adapter, follow these steps.

✎

We recommend attaching the adapter before installing

the wall mount, or inserting the “CI or CI+ CARD”.

1.

Insert the CI CARD Adapter into the two holes on the

product 1.

✎

Please find two holes on the rear of the TV, beside the COMMON INTERFACE port.

2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3. Insert the “CI or CI+ CARD”.

We recommend that you insert the CI card before you mount the TV on a wall. It may be

difﬁcult to insert after mounting. Insert the card after attaching the CI Card Adapter on TV.

It is difﬁcult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you don’t insert the “CI or CI+ CARD”, some channels will

display the message “Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or

CI+ CARD” ID the Host ID and other information will be displayed

in about 2~3 minutes. If an error message is displayed, please

contact your service provider.

• When the conﬁguration of channel information has ﬁnished, the

message “Updating Completed” is displayed, indicating the

channel list is updated.

✎

NOTE

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or

CI+ CARD” may cause damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized

dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or

will not be seen.

TV Rear

[UF5370-ZH]BN68-04824E-03L16.indb 9 2013-11-14  9:33:47

English - 10

Network Conﬁguration

Viewing the e-Manual

The embedded e-Manual contains information about your TV's key features.

This TV has a built-in user guide. To read it, use one of the following methods:

• Open the Support menu and choose e-Manual (Troubleshooting).

• Press the E-MANUAL button on the standard remote control.

✎

Words in blue refer to screen menu options and words in light blue refer to remote control buttons.

✎

A printable version of this guide is also available at www.samsung.com/support.

Scrolling a Page

To scroll a page, use of one of the following methods:

• Press the

or button on the scroll bar at the right edge of the screen.

• Place the focus on the

or button at the right edge of the screen, press the up or down arrow

button on the remote.

Using the Top Icons

Use the Back, Forward, and Opened page icons on the top left of the screen to navigate through pages.

These icons are available when two or more pages are passed.

Returning to the Home Page

To return to the home page, press the a button or select

on the top right of the screen.

Searching the Index

Press the b button or select

on the top right of the screen to display the index. Select a term to display

the page containing the term.

Searching Pages

Press the { button or select

on the top right of the screen to access the search screen. Enter a search

phrase and select Done. Select an item from the search results list to navigate to the relevant page.

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select

at the upper-right corner of the

screen or press EXIT button.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select

. It is possible

to jump from a menu item directly to the related section in the e-Manual. On the screen menu, press the

E-MANUAL button that appears on the screen.

✎

This feature may not be available, depending on the menu.

[UF5370-ZH]BN68-04824E-03L16.indb 10 2013-11-14  9:33:48

English - 11

EnglishEnglish

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-manual can be updated in the

same way with an application update.

On the More Apps screen, select Apps to update. Select e-Manual from the list. The e-Manual starts

updating to the latest version. However, Apps to update appears on the screen only when the update is

required.

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the Smart Hub, as well

as software updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem. To connect wirelessly, you must ﬁrst

attach a “Samsung Wireless LAN Adapter” (WIS09ABGNX or WIS12ABGNX - sold separately) to either the

USB port on your TV. See the illustration below.

Samsung Wireless

LAN Adapter

(Not Supplied)

TV Side Panel

Wireless IP Router or Modem

that has a DHCP Server

LAN Cable (Not Supplied)

The LAN Port on the Wall

Wireless Network Precautions

• Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols.

Samsung recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g

connection, the video may not play smoothly.

• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless

router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the channel set for the

wireless router is currently being used by another device, the result is usually interference and/or a

communications failure.

• Most wireless networks have an optional security system. To enable a wireless network's security

system, you need to create a security key using characters and numbers. This security key is then

needed to connect to the wireless network.

[UF5370-ZH]BN68-04824E-03L16.indb 11 2013-11-14  9:33:48

English - 12

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non-

certiﬁed wireless routers:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption

Type to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi-

Fi certiﬁcation speciﬁcations.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using

PBC (Push Button Conﬁguration) or a PIN (Personal Identiﬁcation Number). WPS automatically conﬁgures

the SSID and WPA key settings.

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network

setup. They are illustrated starting below:

The Modem Port on the Wall

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

TV Rear Panel

External Modem

(ADSL / VDSL / Cable TV)

The Modem Port on the Wall

Modem Cable

(Not Supplied)

LAN Cable

(Not Supplied)

LAN Cable

(Not Supplied)

TV Rear Panel

External Modem

(ADSL / VDSL / Cable TV)

IP Router that has a

DHCP Server

The LAN Port on the Wall

LAN Cable (Not Supplied)

TV Rear Panel

✎

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

[UF5370-ZH]BN68-04824E-03L16.indb 12 2013-11-14  9:33:49

English - 13

EnglishEnglish

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can

remotely.

• Diagnose your TV

• Adjust the TV settings for you

• Perform a factory reset your TV

• Install recommended ﬁrmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is really pretty simple

1. Call Samsung

Contact Centre

and ask for remote

support.

2. Open the menu on

your TV and go to the

Support section.

3. Select Remote

Management and

Provide the Pin# to

the agent.

4. The agent will then

access your TV.

That's it!

Password Change

Screen Menu > System > Change PIN

Change the TV's password.

1. Run Change PIN and then enter the current password in the password ﬁeld. The default password is

0000.

2. Enter a new password and then enter it again to conﬁrm it. The password change is complete.

✎

If you forget the PIN code, press the buttons in the following sequence which resets the PIN to “0-0-

0-0”:

✎

In Standby mode: MUTE

→

8

→

2

→

4

→

POWER (on).

[UF5370-ZH]BN68-04824E-03L16.indb 13 2013-11-14  9:33:49

English - 14

Troubleshooting and Other Information

Troubleshooting

If you have any questions about the TV, ﬁrst refer to this list. If none of these troubleshooting tips apply,

please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover

of this manual.

Issues Solutions and Explanations

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the

P

button on the TV to make sure the problem is not the remote. If the TV turns on,

refer to “Remote control does not work” below.

There is no picture/video. • Check the cable connections. Remove and reconnect all cables connected to the TV and external

devices.

• Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV's

input connections. For example, if an external device’s output is HDMI, it should be connected to an

HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source.

• Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.

The remote control does not work. • Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in the

correct direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

doesn’t turn the TV on or off or adjust the

volume.

• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set-Top-Box user

manual for the SAMSUNG TV code.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to

produce. There may be, however, be a few bright or dark pixels on the screen. These pixels will have

no impact on the performance of the product.

✎

To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by

USB (Samsung.com > Support > Downloads).

✎

Some of above pictures and functions are available at specific models only.

Mounting the TV on the Wall Using the Wall Mount Kit

(Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the

manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious

injury to a child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount.

We recommend you contact a technician for assistance when installing the wall mount bracket. We do not

advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury

to yourself or others if you select to install the wall mount on your own.

[UF5370-ZH]BN68-04824E-03L16.indb 14 2013-11-14  9:33:49

English - 15

EnglishEnglish

Preparing before installing Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

1

8.6 mm

To install a wall-mount, use the Holder-Ring 1.

Wall Mount Kit Speciﬁcations (VESA)

✎

The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall

perpendicular to the floor. When attaching to other building materials, please contact your nearest

dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

− Standard dimensions for wall mount kits are shown in the table below.

− When purchasing our wall mount kit, a detailed installation manual and all parts necessary for

assembly are provided.

− Do not use screws that do not comply with the VESA standard screw speciﬁcations.

− Do not use screws that are longer than the standard dimension or do not comply with the VESA

standard screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV

set.

− For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the

screws may differ depending on the wall mount speciﬁcations.

− Do not fasten the screws that are too strongly; this may damage the product or cause the product

to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

− Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed

wall mount is used or the consumer fails to follow the product installation instructions.

− Do not mount the TV at more than a 15 degree tilt.

Product

Family

Inch VESA Spec.(A * B) Standard Screw Quantity

LED-TV

32 ~ 42 200 X 200

M8 4

46 400 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal

injury due to electric shock.

[UF5370-ZH]BN68-04824E-03L16.indb 15 2013-11-14  9:33:50

English - 16

Storage and Maintenance

✎

If a sticker was attached to the TV screen, some debris can remain after you remove the sticker.

Please clean the debris off before watching TV.

✎

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior

and screen carefully using a soft cloth to prevent scratches.

Do not spray water directly onto the product. Any

liquid that goes into the product may cause a

failure, ﬁre, or electric shock.

Clean the product with a soft cloth dampened with

a small amount of water. Do not use a ﬂammable

liquid (e.g. benzene, thinners) or a cleaning agent.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls,

cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a

problem with the product caused by an increase in its internal temperature.

✎

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts

provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difﬁculties with the product or result

in injury caused by the product falling.

Installation with a stand. Installation with a wall-mount.

10 cm

Other Warnings

✎

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

[UF5370-ZH]BN68-04824E-03L16.indb 16 2013-11-14  9:33:50

English - 17

EnglishEnglish

Assembling the Cable manager

Eco Sensor and Screen Brightness

Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce

power consumption. This causes the TV to brighten and dim automatically. If you want to turn this function

off, go to Screen Menu > System > Eco Solution > Eco Sensor

Do not block the sensor with any material. It can decrease picture brightness.

1. Eco Sensor: This power-saving feature automatically adjusts the screen brightness of the TV according

to the ambient light intensity detected by the Light Sensor.

2. To enable or disable Eco Sensor, go to Screen Menu > System > Eco Solution > Eco Sensor and

select On or Off.

3. Precaution: If you ﬁnd the screen too dark while watching the TV in a dark area, this may be caused by

the Eco Sensor.

[UF5370-ZH]BN68-04824E-03L16.indb 17 2013-11-14  9:33:51

English - 18

Tip Prevention – Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In

particular, ensure your children do not hang on or destabilize the TV. Doing so

may cause the TV to tip over, causing serious injuries or death. Follow all safety

precautions provided in the Safety Flyer included with your TV. For added stability

and safety, you can purchase and install the anti-fall device as described below.

To Avoid the TV from Falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the wall. Conﬁrm that the screws have been

ﬁrmly installed onto the wall.

✎

You may need additional material such as an anchor depending on the type of wall.

✎

Since the necessary clamps, screws, and string are not supplied, please purchase these

additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the

screws onto the TV again.

✎

Screws may not be supplied with the product. In this case, please purchase the screws of the

following specifications.

✎

Screw Specifications

• For a 32 ~ 46 inches: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the

wall with a strong cable and then tie the string tightly.

✎

NOTE

− Install the TV near to the wall so that it does not fall backwards.

− It is safe to connect the string so that the clamps ﬁxed on the wall

are equal to or lower than the clamps ﬁxed on the TV.

− Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check the

connections for any sign of fatigue or failure. If you have any doubt

about the security of your connections, contact a professional

installer.

Wall

[UF5370-ZH]BN68-04824E-03L16.indb 18 2013-11-14  9:33:51

English - 19

EnglishEnglish

Speciﬁcations - TV

Display Resolution 1920 x 1080

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

Stand Swivel (Left / Right)

0˚

Sound

(Output)

10 W X 2

Model Name UE32F5370 UE39F5370 UE40F5370

Screen Size

(Diagonal)

32 inches 39 inches 40 inches

Dimensions (W x H x D)

Body

With stand

738.0 x 445.4 x 49.0 mm

738.0 x 505.8 x 191.7 mm

895.6 x 533.0 x 49.4 mm

895.6 x 593.0 x 235.0 mm

928.2 x 552.3 x 49.4 mm

928.2 x 612.2 x 235.0 mm

Weight

Without Stand

With Stand

5.0 kg

5.6 kg

7.6 kg

9.1 kg

8.0 kg

9.5 kg

Model Name UE42F5370 UE46F5370

Screen Size

(Diagonal)

42 inches 46 inches

Dimensions (W x H x D)

Body

With stand

971.8 x 576.9 x 49.4 mm

971.8 x 637.2 x 235.0 mm

1059.6 x 626.2 x 49.4 mm

1059.6 x 686.1 x 235.0 mm

Weight

Without Stand

With Stand

8.7 kg

10.2 kg

10.8 kg

12.3 kg

✎

Design and specifications are subject to change without prior notice.

✎

For information about the power supply, and more about power consumption, refer to the label

attached to the product.

✎

Typical power consumption is measured according to IEC 62087 Ed.2

Standby mode

To decrease power consumptionunplug the power cord when you don't use the TV for a long time.

Speciﬁcations

[UF5370-ZH]BN68-04824E-03L16.indb 19 2013-11-14  9:33:51

English - 20

Guides

Licences

Recommendation - EU Only

• Hereby, Samsung Electronics, declares that this LED TV is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

• The ofﬁcial Declaration of Conformity may be found at http://www.samsung.com, go to Support >

Search Product Support and enter the model name.

• This equipment may be operated in all EU countries.

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles), still image elements (such as TV channel logos,

stock or news bars at the screen bottom etc.), or programmes in panorama or 4:3 image format on the

screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect

image quality. To reduce risk of this effect, please follow the recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image in full screen. Use the TV set’s picture format menu for the best

possible match.

• Reduce brightness and contrast to avoid the appearance of after-images.

• Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for

details.

[UF5370-ZH]BN68-04824E-03L16.indb 20 2013-11-14  9:33:52

Leht laaditakse ...

Samsung UE40F5370SS Lühike juhend

See juhend sobib ka

Samsung UE40F5370SS Lühike juhend

teistes keeltes

Seotud paberid