4
2
5
6
1
3
Remove all packaging from the TV. Retain the packaging.
If you dispose of it please do so according to any local regulations.
(P.N.: 1067330)
Do not connect the TV to the mains supply until you have
completed all the connections.
Install the batteries correctly by following the polarity (+ and -)
indications in the battery compartment.
Congratulations on the purchase of your new
Sandstrøm TV.
Your new TV incorporates the latest technology to enhance your viewing experience.
We would suggest that you allow about 20 mins for initial setup.
Please follow this guide for a successful first time installation.
Well done, your new TV is now ready to use.
You will find that there are many exciting features available. To get to know all
these features, please take some time to read the instruction manual provided
with your TV.
Quick Start Guide
32” HD Ready 1080p
LED Backlit LCD TV
S32LDIB10
TV
Instruction Manual Quick Start Guide
TV Base
SCART Adapter Cable Screws x 4
Digital TV Switchover
Addendum
Remote Control /
AAA Batteries x 2
Component Adapter CableAudio Adapter Cable
1. Lay the TV down on a flat surface with the back side facing up. Please make
sure to place a soft cushioned material (such as a pillow or thick piece of
foam) beneath the screen.
2. Slide in the base stand until the scew holes are aligned. Secure the base stand
with the 4 screws.
Connect one end of the RF coaxial cable to the aerial socket on the wall and
the other end of the cable to the ANT socket on the right rear side of your TV.
1. Slide the back cover to open the
battery compartment of the
remote control.
1. Connect the mains cable to the mains socket after you have completed all the
connections.
2. Switch on the POWER ON/OFF switch at the bottom of the TV. At this
stage, the TV switches to standby mode. The red LED indicator will illuminate
on the front panel of the TV.
3. Touch the touch control panel of the TV once to activate it (indicator on the
touch control panel will illuminate), and then press the touch sensitive control
on the touch control panel or on the remote control directly to turn the TV
on. The red LED indicator will flash for a few seconds.
Connecting the Aerial
Unpacking
Installing the Base Stand
Operating Your Remote Control
Connecting to the Mains Socket
Turning the TV on for the First Time
2. Insert two AAA size batteries.
Close the battery compartment
cover.
1. Press the OK button or the button on the remote control to select Auto
Install to start the auto tuning.
2. Auto tuning will commence. This operation may take about 5 minutes. After
auto tuning is complete, the first DTV channel tuned will be displayed on
screen.
The first time you turn the TV on, it will go straight into the Installation Guide.
1
2
I/O
Screws x 4
(P.N.1031741)
Slide in
I/O
To mains socket
LED indicator
: Exit
OSD Language
Country
Auto Install
Use Mode
English
UK
Home Mode
Startup Menu
1
2
Still
DMP Stop
Play/Pause
Lang.
Zoom
Exit
TV Source
1 2 3
4 5 6
7 8 9
0
Recall Info
CHVOL
FAV
Sound
Picture
Recall
Menu EPG
OK
CH List
Text Size Reveal Cancel
Hold
Sleep Subtitle Comp
Index
Sub.Code
Mix
OR
RF coaxial cable
(not included)
-
1
teistes keeltes
- English: Sandstrom S32LDIB10 User manual
Muud dokumendid
-
Currys Essentials C19DIGB10 Lühike juhend
-
-
-
-
-
Logik L19DVDP10 Lühike juhend
-
Samsung LE32B350F1W Kasutusjuhend
-
Samsung LE22C330F2W Lühike juhend