TCL TS7010-NA toote info

TCL
Bränd
TCL
Mudel
TS7010-NA
Kategooria
Bluetooth-muusikavastuvõtjad
Tüüp
toote info
Sound Bar main unit
AC power cord x 2
3.5mm-to-3.5mm
audio cable
IR pass-through cable
Remote control
Wireless subwoofer
AAA battery x 2
QSG Wall mount template
Warranty
User
manual
1. Place the supplied wall mount template on the wall. Make sure the wall mount template is at
least 5cm below the center of the TV.
2. Use a level to make sure the Sound Bar is positioned accurately.
3. Use the tape to stick the wall mount template firmly on the wall.
4. Mark on the wall using each marking on the template through the mounting holes (Fig.1).
5. Take away the wall mount template.
6. Drill a screw hole at each marking on the wall.
7. Insert the supplied wall anchors into 2 screw holes on the wall (Fig. 1).
8. Insert the supplied screws into the wall anchors. Leave 4mm between the screw heads and the
wall (Fig. 2).
9. Fix and tighten the screws on the wall (Fig. 3).
10. Hang the Sound Bar main unit on the screws (Fig. 3).
Press to turn the Sound Bar main unit on or to standby mode.
Press to switch the audio source among HDMI/USB/AUX/Bluetooth/Optical modes.
Press to select the Bluetooth function.
Press to increase or decrease the volume level.
Sound Bar status LED indicators
in standby mode The red LED is on solidly.
in HDMI ARC mode The purple LED is on solidly.
in AUX mode The green LED is on solidly.
in Bluetooth mode The blue LED is on solidly.
ready to pair The blue LED flashes slowly.
pairing in progress The blue LED flashes slowly.
in optical mode The yellow LED is on solidly.
in USB mode The white LED is on solidly.
Optical cable
Operation LED indicators
Listen to music. The white LED is on.
Press to pause the music. The white LED keeps flashing.
Press or to skip to the previous/next track The white LED flashes quickly and
goes back to the source LED.
Remote control
1
2
3
LED
The Sound Bar will pair with the subwoofer automatically. If pairing is not successful, pair
your Sound Bar with the subwoofer manually. Press to activate pairing with the Sound Bar
main unit.
• flashes slowly when the subwoofer is in standby mode.
• flashes slowly when pairing is in progress.
• remains on solidly when pairing is successful.
Operation LED indicators
The white LED flashes quickly and goes back to the source LED.
The red LED keeps flashing.
The red LED flashes and goes back to the source LED.
The white LED flashes once.
The green LED flashes once.
The yellow LED flashes once.
TCL TS7010
Copyright © 2019 TCL.
All rights reserved.
TS7010_AU_EN_QSG_V2.0
2.1 Channel Home Theater Sound Bar
TS7010
Quick start guide
1. What’s in the box 2a. Overview 2b. Overview 3. Wall mount
4. Install/replace the remote control batteries
Sound Bar main unit Subwoofer
5a. Connect 7a. Use 7c. Use5b. Connect 6. Pairing
Bluetooth device LED behaviors under different source mode
7b. Use
Use the USB device for music playback
IR pass-through cable
1. HDMI cable
2. Optical cable
3. 3.5mm-to-3.5mm audio cable
4. RCA-to-3.5mm (not supplied)
Power supply
Subwoofer
Remote sound functions
7
3
5
9
11
Battery type:
1.5V AAA battery x 2
Wall screw (M3.6) x 2
Wall anchor x 2
HDMI cable
LED
PAIR LEDAC input
power connector
Press to turn the Sound Bar on or to standby mode.
Press to mute or unmute the sound
Press to increase or decrease the volume level.
Play/pause/resume playback in Bluetooth/USB mode.
Press and hold for 3 seconds to disconnect the Bluetooth
function.
Press to skip to previous or next track in Bluetooth/USB mode.
Press to switch the audio source to Bluetooth mode.
Press to select the equalizer (EQ) effect when you are watching
news or movies or listening to music.
Press to switch the audio source among HDMI/USB/AUX/
Bluetooth/Optical modes.
1
2
3
LED
1
2
1. Press .
2. Press .
The blue LED flashes slowly. The Sound Bar is ready to pair.
3. Power on your Bluetooth device and activate its Bluetooth function.
4. Select TCL TS7010.
You hear distinct double beep sounds.
The blue LED remains on solidly when pairing is successful.
USB
USB
IR pass-through
cable connector
AUX
input connector
AC input
power connector
HDMI ARC
input connector
Optical
input connector
USB Type A
connector
(only for
music playback)
~AC IN
IR pass-through
1
2
~AC IN
~AC IN
IR pass-through
Not supplied
43
1
2
Fig.1
Fig.3
Fig.2
Wall mount template
4mm
600 mm
For further support:
Australia: visit www.tclelectronics.com.au or call TCL Customer Service on 1300 738 149
New Zealand: visit www.tclelectronics.co.nz or call TCL Customer Service on 0800 449 750
  • Page 1 1

TCL TS7010-NA toote info

TCL
Bränd
TCL
Mudel
TS7010-NA
Kategooria
Bluetooth-muusikavastuvõtjad
Tüüp
toote info
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid